First things first: I needed to “de-shoulder” the edge, and K390 proved its reputation as a hard steel. I noticed it again when rounding the spine a bit — those vanadium carbides really make sanding a challenge. Then again, sanding has always been something of a signature for me, especially when shaping convex edges. With 2% cobalt in the mix, keeping the blade clean is essential to avoid stains or rust.

Now, onto the fun part! When you get a new knife, what matters most is how it fits into your life: what makes you smile, how people react to it, and how it feels to carry and draw it from your pocket. The joy of using a good tool should always be a pleasant experience.

The Lil’ Temp 3 is stubby, with a distinctly modern folding knife look. Its blue handle helps it appear approachable — a friendly tool rather than a “ninja weapon.”

One of the biggest drawbacks of the original Lil’ Temp back in 2001 was its clip. That thick, rigid piece of steel with four screws made getting the knife in and out of your pocket more difficult than it needed to be.

The LT3 solves this with its spoon clip, which is easy to tune. Following Sal’s advice, the knife is now effortless to retrieve from the pocket — a huge improvement. The LT3’s handle design also helps: I carry the folder tip-up, and the beak at the end of the handle, combined with the FRN traction patterns, makes the knife practically jump into my hand. Drawing it is effortless, even while sitting in a car.

The squarish handle also is a big plus: it helps indexing the knife instinctively : You know where is your edge immediately.
So, it is very safe and easy to draw it and open it, do the cut and then close it and pu it back in the pocket. You do that without thinking. Muscles memory…
It is a huge plus for a working knife’s user to be able to use the LT3 and close it and put it away back in the pocket in a breeze.
This is also really enjoyable, and coming from many great Spyderco Designs like the Military 2 or the Sage 5 or the Para 3, it is noticeable how nice that LT3 LW is in getting into action.
To sum up, it is really pleasant !

For exemple my lovely Lionsteel Nano is not the easiest to bring into action but it is forgiven as it is considered as a “Lady & Gentleman” folder.

But for a workhorse they are other specifications. Safety and reliability in putting in action your knife is mandatory.

FRN once molded in scales can propose high tech shapes and pattern designed by Sal Glesser which are enhancing the ergos even with wet hands.

The LT3 is one of the most confortable folder i have ever grip. The handle is thick, filling my hand’s palm and ready to be squeezed for hard cuts. The thick blade spine is asking to be pushed into materials.
That’s why my first mission was in the kitchen with tomatoes and lemons…. 😉

After a first cut into lime and avocados the blade was already getting its nice patina. K390 is deadly serious about getting stained and it is a good thing as that patina will protect the naked steel from pitting. I just wipe it clean after a rinse under the tap and check that the pivot to be well oiled.
This is exactly the opposite I do with the Sage 5 Salt ! I’m careless wth those Salt folders. This Sage is smooth like butter even without any oiled pivot. Magnacut and the Sage pivot design turn it like into a knife you can keep dirty and forget in the sink.
Not the LT3.
As strong as its is, its Achilles heel will always been proper care and maintenance. But serious users know how to take care of their tools. And maintenance is also part of the fun of owning good knives. The patina on the K390 blade will always show proudly that your knife is a user not a safe queen.

There is also the solution to cut cheese to keep naturally some grease your blade.
Those two cuts here has been made with the LT3. As you can notice those are clean push cuts. the geometry is that great.
Actually, in the kitchen, or preparing the meal in a camp, that LT3 is at home. That 4mm thick spine is not an obstacle as the blade is tall.

This is one of the things I love in my Cold Steel Voyager or Recon 1 XL: thick high blade but thin geometry. Thhose got much longer blades than the LT3 !

But the C69PBL3K390 does not act like a wedge on fruits like avocado or apple.
But once you turn it against harder material like plastic, you can apply a lot of force ! The handle is so comfy you can use it like a fixed blade. This stubby folder turns into one of the most solid “matter separator” ever made by Spyderco. It feels much more solid than their flagship, the Military and much confortable than their Shaman ! Go figure !
Let’s not forget they all got the same designer but, after 25 years of in house refinement, the LT3 is not a small contender. I even feel the LT3 could be the personal answer from Sal to the Spyderco Techno !
3 inches of pure K390 performance.

Now thickness is always an important factor in performance.
The UKPK is uncanny sharp with its thin blade. But it is designed for more mundane and delicate works not for being used hard in a construction site, for example.
The LT3 plays in the same field as the Tenacious. (The last sprint run in CPM-M4 is really perfect for dirty hard chores.)

Both knives are choil less, with full flat ground blades, and they got an open back construction handle, easy to check and clean.
The Tenacious is a little bit longer offering a great blade/handle ratio.
But the LT3 got a stouter blade and a much better action/ compression lock.
And also a much much confortable handle.

About blade ratio, let’s quote Sal:

Many of our blades are designed to a blade length legality. The Delica is a perfect example. The blade length is 3.0″ which is acceptable in many places for legal reasons and for social concerns. The handle designed to the blade length is just not large enough for many of the people that use knives as tools. So I made the choice to give the handle extra length for safety and control. 

In my opinion, blade to handle ratios are an “eye” thing, which is fine, but I prefer to design with the bend towards function and safety. “A scalpel would not perform better if the handle were smaller or the blade longer”.

“Choil less” does not mean that your index finger is in jeopardy !
In case the ultra strong compression lock would fail or get disengaged…
There is no choil but there is a kick ! So your index finger is relatively safe !

Wait a minue! That LT3 Lightweight’s handle reminds the handle of the now discontinued Spyderco Vagabond. (The FB12 Vagabond was a compact fixed blade designed for on-the-go food preparation, such as picnics or packed lunches.)

See?

Same “beak” at the pommel too !

Thick handle and thick 3 inches blade on both.

Same designer again. 😉
I told you the LT3 was a “wandering rōnin” 😉

So once the LT3 has jumped in your hand, it is really sheeple friendly with all its gentle curves and nice handle color. It looks like a puppy of a bigger knife, a cute knife actually. That’s also a big plus for a low profile working tool.
If someone working in a ranch uses a LT3, it won’t raise any eyebrows. It is as threatening as a screwdriver. Nowadays this is a big plus to own a low profile knife. Also when in sheeple hands, the LT3 is able to deliver. Yesterday, the family kept borrowing my knife, even to cut the crust of the pie for the Grand Ma ! This would not happen with my beautiful pointy Military 2 (Even my pointy UKPK was seen by them as a weapon able to pierce some armor…) ! The Lil’Temperance is just seen as a high tech folding tool, easy to control and put on “safe” and this is just what we ask when children are running around the table.

“The game never ends when your whole world depends
On the turn of a friendly card” Alan Parson Project.

The Temperance tarot card represents balance, moderation, and harmony. It encourages patience and finding the right mix in life – whether in emotions, relationships or work. It is a sign of inner peace and divine timing.
And this is exactly what the Lil Temperance3 Lightweight is oozing from its synthetic pores right at the moment you hold it.