Tag Archives: Made in China

Spyderco C208G – Clipitool Standart -The Three Eyes Alien.

20191209_141610-018861591401108267484.jpeg

Someone I used to know has posted this review on our Facebook group about that Alien kind of knife and his post is a gem:

Whilst rather drunk it seems that I bought a Spyderco ClipiTool (TM) Standard.
Because it was cheap in the Black Friday Sale. And I was drunk.
Well, it has arrived and after a day of playing with it and using it I don’t really know what to make of it.
In the past looking at it online I had assumed it was quite small, bigger than a Dragonfly but smaller than a Delica. But it isn’t small, it’s quite large, with a 3.50″ (89mm) liner locking full-flat ground blade in 8Cr13MoV. Which is……a steel. It’s adequate. G10 handles with a central steel liner which functions as the linerlock. It also weighs a substantial 4.2.oz (119g) which in context is really quite heavy for what this is.
The blade is thin and nicely slicy, which is good.
The tin can opener with screwdriver tool blade and opposing bottle cap opener with screwdriver tool blade are marvels of design, in that they look cool and work, but they don’t work any better than those on an SAK.
It has a classic Spyderco three screw pocket clip. Obviously, as it’s a ClipiTool (TM).
So in conclusion I don’t understand this knife. Or knife/tool combo. It’s quite large, quite heavy, doesn’t do anything differently to a host of other knives and multitools and has a steel that to us Knifeknuts is barely adequate.
And when not on sale this is not a cheap knife, it costs around USD80. That’s a lot of money.
What is this for? Who is it aimed at? Aside from drunk Spyderco collectors like me?

This is not an hommage to Victorinox but a parody.
Pardon his French: “Seulement un hommage? Je comprends cela mais c’est plutôt une parodie.”
“”Let’s put a couple of fancy design SAK style tools on a fairly crap Spyderco and try and sell it. Oh yeah, idiots will buy it when they are drunk.”  was his conclusion.

Could he be right ? Could he be wrong ? Or at least could I disagree or agree with him ?

Fist I was wrong assuming it was Sal Glesser design with Eric huge signature on the blade. I remember Sal looking at SAKs with admiration. Sal is an inventor and so is Eric.


My first impression when opening the blade of that Standart Clipitool was WOW.
It is a long thin blade with a very nice geometry: it was razor factory sharpen.
There is a generous choil and the hump of the next tool is creating some kind of sub-guard ! The ergos are quite good actually.
But let’s compare that knife with other classic backpackers option: a Böker Plus Tech-Tool Carbon 4 and a good old SAK from the 70’s.

The Spyderco is less in the blocky side, which also means it offers less tools.
In fact it offers 3 blade/tools.

That’s all. But to quote Spyderco:
“The star attraction of this design is a full-flat-ground leaf-shaped blade crafted from 8Cr13MoV stainless steel. It locks securely open via a stout LinerLock mechanism

 

and is complemented by a folding can opener/small screwdriver and a bottle opener/large screwdriver with a wire-stripping notch. 


Both screwdriver heads are hollow ground to ensure a secure fit in slotted screws. Although they do not lock, they are supported by sturdy slipjoint spring mechanisms to keep them open during use.

Like the primary blade, both tools are precision machined from 8Cr13MoV stainless steel and feature generously sized Trademark Round Holes.”

I would add that both tools also got a generous choil which lacks on the SAKs.
The screwdriver is hold and secure by your grasp and cannot close on your fingers.
That choil is the same which can be founded on boots daggers as quillons and which was featured on the good old C36 Military. It is a clever way to avoid any forcing on the handle and the pivot.

Opening a jar with the screwdriver, waiting for the “Pop” to happen.

The main idea behind the Clipitool was to provide a One Handed Tool. When you are climbing a ladder or holding something with your other hand, opening your SAK with your teeth can be a problem. Here you can get access to your tools very easily.

This is also something which has been explored on Leatherman’s for two decades but Spyderco’s blade is really generous.

 

I have convexed the edge as the steel is not as hard as many other super steel. It was also a breeze to polish. It won’t have the same edge retention as many of my usual EDC but I know I can use it hard and easily bring it to sharp. After all the SAKs steel works the same. I can scratch the edge on rocks when gold digging (long story) and bring it back to sharpness after without diamonds.

“The handle of the ClipiTool Standard is built on a framework of nested stainless steel liners, textured black G-10 scales, and solid stainless steel backspacers and springs. Its screw-together construction ensures the precise alignment of all parts, and a two-position hourglass clip provides a choice of right-side tip-up or tip-down carry.” Spyderco’s card again.

So what do we got ? An honest tool which does not swear you to be the ultimate all around multitool but an easy partner which won’t be scared of dirty jobs. A proud blue collar’s solid companion, easy on budget and easy on the ride.

I really enjoy the fact to be able to get a screwdriver out of my pocket with one hand. I will use as a mini prybar, a scratching tool, a probe, a good reason to justify the fact I’m carrying a knife after all and keeping its generous blade sharp and pointy for more mondaine task.
All in all that pragmatic Clipitool can be escorted by my Para 3 and my Shaman with zero shame.
So thank you Eric !