Category Archives: Photos

Folders, Photos

POCKET LEGENDS OF THE FALL FEAT. SPYDERCO SCHEMPP BOWIE ~ C190CF

7 Comments

Today is the day the world mourns David Bowie.
It’s the perfect time to talk about another Bowie and another hommage: Ed Schempp’s Folding Bowie.

ED schempp Bowie

I have met again Ed at the Police National shooting range at avenue Fosh, Paris, in November. It was some kind of a mini knife show hosted by Patrick Bonetta, coutelier and keen master in sharpening. Both old friends were showcasing there their last knives, from kitchen to law enforcement duty. (Patrick will be the subject of my next articles BTW, the man desserve an entiere book !!)

Immediately Ed introduced me proudly to his last Spyderco collaboration: his bowie. What a gem !
The knife is simply oozing quality from all its pores: brass guard integrated bolster, carbon fiber handles…. a smoooooth opening. The beautiful symmetry once open and the gentle angle between the blade and the handle are trademarks of Ed’s designs we enjoyed so much on his Tuff and Persian.

This is not the first folding Bowie in the Spyderco catalog. Remember the Slysz Bowie ?
And I’m really a sucker for bowie shape blades. They got belly and they are pointy.
So deciding to put my Nilaka at rest for a while, immediately Ed’s Bowie got a ride in my front pocket.

“It has been made to be worn as a much smaller knife” Ed told me.

And he was right, the wire clip is so well designed that the knife disappears and ride deep in the pocket. It won’t be as quick draw friendly as the C36 Military, for example, but it is so discreet in this days of low profile mania.
Once open, the beautiful blade is impressive. Narrower than his Navaja but elegantly theatrical !
Again this is a Gentleman folder destin to be used served by an ‘almost” full flat ground thin blade.
At 2.5mm thick, far are the days of the 4mm hollowground Starmate (pictured here in the Gayle Bradley review).
I was not impressed by the initial factory sharpening and since I have thinned its edge to more akeen result. It was done patiently as CPMS30V is not the easiest steel to let its molecules go away…


The bottle bottom tests are now passed with flying colors. Even the mineral water bottle, thinner and easier to collapse).
The natural angle found in the Kukris is again a nice plus even with a short knife. Ed is a farmer and he creates and builds tools for his ranch.
The integrated guard was a technical requirement which is cleverly accomplished. My first knife ever was a small bowie and its guard was a PITA. I was 5 year old and I knew this knife was not well designed…
On Ed’s Bowie, the guard is nicely “anchoring” the hand as a thumb rest for example. All is smooth and gentle under your fingers. Even in hammer’s grip the small guard doesn’t come in the way.

Reverse grip either.

So if you want a small folding bowie with a great attention to details, a nice belly, a slick and smooth action, the C190CF can be your choice.
I enjoy the brass bolsters and its soft texture contrasting with the woven carbon fibers. It’s a very sensual tool with the handle resting securely in my palm avoiding any lose of grip.
Back in the 90’s they were some very long conversations on the forums about how reliable the linerlocks were. In this bowie, the handle is very rigid and the lock very well executed in Taichung. The knife has passed my tests including the carpet test which was not easy with the Spyderco Tuff. I absolutely got zero concern about the lock on this one. I got zero play lateral or vertical even with white knuckles. It is stout.
This is another ‘home run’ from Ed and another very clever hommage to a legendary design. Once in the pocket it is very addictive.
Also used in the plates, the knife is elegant and do not raise any eye’s brows even in the restaurant. A great steak knife !

Some size comparaisons:

Two worlds but equally great usability. Eric Glesser Manix 2 lightweight in CPM110V is a Nasa dream.


Two Bowie brothers as the Slysz’s was invited for the picture.


Another pocket Bowie, this one made by Xavier Conil.


With the Mighty K2.


With Fred Perrin’s Streetbowies father and sonny Streetbeat.


My good old Benchmade BM806S. Another slick design wich has proven to be reliable in all situation.


With my very first knife purchased at Thiers in 1971 ! Yes it was a Bowie too !


With my good old rehandled Carbon V Cold Steel Trailmaster !


Fred Perrin custom Bowie La Griffe from the 90’s !

Folders, Photos

Spyderco Native C41CFP5 – CPM110V and Carbon FIber handle Sprint Run

6 Comments

Native 5 SPrint Run CPM110V

Exactly three years ago, on 1st october 2011, I had received my Native 5. You can still read how ecstatic I was toward that great ocket knife: solid, ergonomic, easy to carry in the pocket watch. I was especially amazed by the strong lock back with zero blade play and the new easy to polish on leather S35V steel.
Three years later, the Native 5 is getting a spectacular emotionnaly overloading Sprint Run: CPM110V blade and Carbon fiber handles. In 2012 (or 13) the Spyderco Forum knives was also a CPM110V Native but with a green diamond G10 handle.
This time some grammes are outed as Carbon Fiber is lighter than G10.
Mine is as flawless as my first Native. The blade action is smooth as ever and I can generate any play vertical or horizontal. The grind is a little thicker compared to my S35V version but not a big deal as the knife came as a razor.
Again I have installed a Delica 4 blacked clip for low profile, as I carry the knife tip up in my pocket watch.
CPM110V is a great steel that I was not able to really dull yet on my Dark Blue Manix 2. That steel seems to be fresh up easily with a dozen of pass on a white ceramic.
I’m very happy to continue the testing on one of my favorite plateforme: the Native 5 ! Again Spyderco is a figure of pionneer giving the chance to use the best high tech metallurgy on their best refined design.
More soon…. So stay tuned.


The Pink, the Sprint Run, The S35V and the Dark Blue Manix 2.


The Carbon fiber is on the right.


Yin and Yang…

Folders, Photos, Uncategorized

Spyderco Amsterdam Minimeet the 10th Anniversary Report

3 Comments

Amsterdam Minimeet 2014

This review will be update on regular basis as we are also dependent from Spydercollector pictures.

Nemo: Again we have been 80 lucky people to attend the 10th Anniversary Spyderco Meet in Amsterdam.
Some were there since the beginning like my friend JD and this post will be both impressions.
Here the list of knives and our impression.
For the model pictures you can visit Spydercollector excellent blog here as he got the exclusivity:
http://spydercollector.wordpress.com/page/2/

Sal Glesser

29 concepts and prototype are a lot in a single session. They are a lot and a lot of ideas in non locking knives, bushcrafting, SD tools, long forgotten designs and performances researches but… without showing any pics it’s a little pointless to talk about them here.

JD and Sal

Eric and Sal have harvested our impressions, sucking up feedbacks from 80 feverish minds.
For example JD gives the important hint that Walter Brent trademark was mirror finish blade on his Mamba Concept Model.
JD: Polished deep hollows, thats Walter Brend!
Nemo: And Eric will now see what would be the best steel for respecting that particular signature.

This is where the Minimeet shows how important exchanges are ! Eric and Sal are here to listen to the “hot” feedbacks and they take very good notes of each of them. It’s quite obvious after to notice the changes in a final product. (We got some very passionate exchanges three years ago with Sal about a huge folder featuring an “über” strong lock which could be used as a tough folding camping tool for example…)

Also the Minimeet is the chance now to see designers and knifemakers coming in Amsterdam to present their prototypes.
Like Ulrich “Uli” Hennicke:
Uli new proto

or
Filip De Leeuw:
Filip De Leeuw

So let’s browse the memory of some models we liked:

Slisz Bowie Marcin Slysz Prototype
JD: Impressive! Ergonomic, solid, slicy.
Nemo: This one is my favorite so far in this 10th Anniversary. A sexy shape, a ergonomic titanium handle. This could be a Sebenza Killer with a bowie blade and full flat ground blade. It should be release for mid 2014. So we will have to review it in september.
(I will like pictures from Wouter site as soon as he will have them on line.)

His ‘father’ could be the K2 by Farid Mehr.
JD: Pocked machete!
Nemo: but again if it’s going to be produced in CPM10V this huge Sebenza / Bowie like knife is going to be a must have.
Farid is known for his Heavy Metal knives. He was making RIL locks in stainless steel on thick blades !! The K2 has been refined by Eric and Sal a lot before to born. Now it’s a big folder but with a slick appearance. It’s big but it’s a very useful shape. You can easily see how to cut a whole chicken or a pinapple with it. This knife is also very easy to clean.
Fortunatly we got a link to the pictures here:
http://spydercollector.wordpress.com/2014/03/04/spyderco-2014-production-prototype-farid-mehr-k2/

The Native 5 Lightweight production sample
JD: Favorite Native so far !
Yes it’s light and it’s solid a s a rock. Sal loves it. This is a knife destined to be a classic.
It’s a Native 5 with FRN handle but the feel in your hand is balanced. A great tool to clip. The plastic handle is square and smooth. I really liked it.

ARK Sam Owens design production prototype
Nemo: This little FB is destined to be a self defense tool to prevent rapes under the shower in the Army… Go figure how people are crazy nowadays. What can I say ? Of course it will be rust resistant as it will made in H1. I would have preferred a Fred Perrin La Griffe as even with soap in my hands I would not have lost my grip. Anyway, fighting naked with a blade in the shower seems like a nightmare…
They should invest in video camera instead. The blade shape is like a Sharpfinger which is a very nice utility and skinning edge. For SD I would have prefer a serrated edge for a maximum of pain without to inflict lethal wounds. Anyway a razor sharp neck knife for shower does not seem like a good idea to me anyway. I’m much more for the use of psionic blasts…
picture and description here

Battlestation Alex Diaconescu production sample.
JD: Much of the jimping has been removed after feedback. Nice handle but this is not a thin slicer.
Nemo: Th grip once open is very secure. It’s a very solid feel. again it looks like a weapon oriented project. Would look great in a movie. It’s a “dramatic” design for Snake Plissken to escape from a battle station.
Picture and description here:
http://spydercollector.wordpress.com/2014/03/03/spyderco-2014-production-sample-alex-diaconescu-battlestation/

Bradley Folder 2 Gayle Bradley design Concept model.
We had the chance to tot two BG folders. One with a bolster and the other one without it.
JD: Both very nice, but the bolstered one is nicest. Most comfortable in the hand and prettiest!
Nemo: Yes, but the bolster does not leave any access to the pivot screw… Beautiful knives. No finger choil, very sexy lines. Like a stretched and lighter Gayle Bradley previous hardcore folder.

Chubby Michael Burch design Production Prototype
A lot of belly and a false edge for nice looking little big knife. But I did not get any vibes from this one… I did not like the clip at all as it is ready to scratch the car’s paint.
Pictures are here:
http://spydercollector.wordpress.com/2014/03/03/spyderco-2014-production-prototype-michael-burch-chubby/

Condor Jot Singh Khalsa design CM
JD: Interesting look, awkward and uncomfortable in the hand.
Nemo: Yes, there is pig tail to the handle for the pinky to rest. But like you I was not convinced. They are a lot of curves in this knife but I was not able to find it confortable to hold too.

Dice Eric Glesser Design PP
JD: The Dice is Nice. Fits me even better than the Domino.
Nemo: The opposite to me. I miss the blade of the Domino which is the minimal length for me.
Pictures:
http://spydercollector.wordpress.com/2014/03/03/spyderco-2014-production-prototype-dice/

Dog Tag Folder Serge Pancheko PP
Nemo: this one going to be a success as it is so cute. It could be a anti rape self defense tool too as this small folder can be a latch ditch weapon for naked fights.
Pictures:
http://spydercollector.wordpress.com/2014/03/03/spyderco-2014-production-prototype-serge-panchenko-dog-tag-folder/

*******Edition of the 10th of marc 2014. Further reading will be even more chaotic than the previous one. 🙂

Foundry Spyderco design PS
JD: Comfortable and useful design. Bit heavy.
Nemo: and it will be rare as the Carpenter workers will have it in priority. Eric told us it took him one year to design it as he wanted to design a simple knife for blue collars. This is a knife which can be used for eating, the kitchen and for hunting. This is the kind of knife my grandfather would have love.

Frontier Ed Schemp design PP
JD: Nice thin grind!
Nemo: I usually a big fan of Ed Schempp design but here the S guard is getting in my thumb’s way. I like to give pressure on the back of the blade with my thumb (that’s why I do not like vertical play also).

Mini Nilakka Pekka Tuominen design CM
JD: Interesting. Clip needs to move to the back of the handle.
Nemo: The clip was not as clever as the Nilakka folder. A very impressive little knife.

Grievous Dave Gagne design CM
JD: Do not understand what it is for.

Introvert Chris Knutson CM
JD: Interesting look, fun to flip, rings get in the way of use.
Nemo: another folding Lagriffe. Good thing is that Spyderco is always giving credits to the original designer.

Ion Brad Southard design
JD: Pretty and smooth. Liked the inlayed lock the best. Gentac knives.

Joule Michael Reinhold design
JD: Functional design if the handle is rounded. It has to many shar points now.

Kingyo Liong Mah design
Kiwi 4 G10 Prototype
Lady Finger Ed Schempp design
Lil’ LionSpy Gianni Pauletta design Proto
JD: Nice but thick.

Liong Mah Liong Mah design CM
JD: Nicest and most practical of the two Liong Mah designs.

Manix 2 LTWT 110V
Mike Draper design PS
JD: Big but comfortable and useful design.

Myrtle Filip De Leeuw design CM
Native 5 Fluted CF Proto

One-Eyed Jack A.T. Barr design
Opus 14 Ulrich Hennicke design CM
JD: Anonimus, would like to de a DE/UK legal design from him.

Ouroboros Paul Alexander design
JD: strange ergonomics.

Para Military 2 Composite – Sprint Sample
Para Military 2 Fluted CF – CM
JD: Most comfortable PM2 ever!

Parata Paul Alexander design
JD: strange ergonomics.

PIP Jamie Bailey design CM
JD: End of handle too pointy, fun little knife

PITS Mike Read design Proto
JD: Comfortable, practical & elegant. Most upscale UK legal production folder.

Retract Ed Schempp design CM
Roadie Spyderco design
JD: Cute! Sharpen flat on the stone to make a pocket scalpel

ROC Serge Panchenko design proto
Rockhopper Michael Reinhold design CM
Spydi hole hard to reach.

Roto Wedge Spyderco design CM
Rubicon Peter Carey design Proto
JD: Pretty! But clip is digging uncomfortable in the hand.

Shaman Spyderco design CM
Six Blade Tool CM
JD: Pointy holes.

Southard Folder (all black)
Spin Blue Nishijin
Splitter. Spyderco design CM
JD: Solid, ATR 2.0

SpydieChef Marcin Slysz design CM
JD: Impressive! Beautiful and practical.

Spy-DK Prod sample
JD: Nice thin edge! I could open it with one hand, but not easily.

Stop Lock CM
Swede Michael Henningson CM
JD: Nice look, lanyard hole very sharp and pointy.

Szabo Higo Laci Szabo dsign CM
JD: Needs to be found thinner, more like the knife it is based on. Other than that nice modernization of and classic.

Three Blade rescue CM
JD: Small holes have pointy tops.

Texture tech CM
ULU CM
Ulize M Ulrich Hennicke design
JD: Very Spyderco jet different. More carriable size.

Valloton Sub-Hilt 3.5 Butch Vallotton design CM
Victory Jot Singh Khalsa design
JD: Interesting look, awkward and uncomfortable in the hand.

Worker G-10
JD: Comfortable handle. Will probably be sold out very quickly.

Genzow Hatchet Martin Genzow design CM
Lum tanto Sprint
Ronin 2 Michael Janich Proto
Packer Gayle Bradley design
JD: Excellence!
Nemo: I was very impressed by the balance and the heft of that “Tomahaxe” 😉
Beautiful lines and great handling. I would love to test it as soon as it is released. I think this gorgeous hatchet has made a great impression !

The Dutchman tom Zoomer design CM
B & T Phil Wilson design CM
JD: Slicey
Nemo: But the “cobrahood” guard wich will go in the way when power cutting and batonning.

Whale Blade H1 w/handle Spyderco design.
JD: For the GI’s

Eric Jur and Sal

Folders, Photos

Spyderco Domino C172CFTI – Flipping High Quality EDC – The JD / Nemo exchanges

7 Comments

For this post I have invited my friend JD to discuss together about the Domino.
It’s a on going project and the post will be updated regularly instead of letting the discussion rolls afterward. Also more pics will be released later.

Spyderco Domino Nemo Knives Review

When I first heard about the release of the Domino and being not present at the Minimeet. Well, I was not excited. Another Spyderco flipper, why not, the more the merrier. On the picture I have found that the hole on the blade was made to much forward for my test giving to the knife an unbalanced look.
But that was on the picture.

Spyderco Domino Nemo Knives Review

Now I got the chance to own the Domino. I have change my mind.
My new impressions were:

– The knife is compact.
– The action is smooth.
– The knife is perfect balanced.
– The blade is stock is thin pointy with a nice belly.

Immediately I have changed the clip into a tip down carry, giving me the possibility to easy spyder drop open the knife. It works great.

So, as my friend JD in the Great Kingdom of Holland got the same Domino, I have asked him to test it together and update that post with our different point of view.

So is the Domino the best EDC Golden can provide to us in 2013 ? Let’s find it out.

__________________________________________________________________________________

JD
Alright, here we go! I did handle the Domino for the first time at the mini-meet and thought it was a nice modern folder but probably not for me. It is somewhat bigger than the knives I normally carry and use. Knives like the Spyderco Air and Pingo. Practically 6cm of edge is all I need in a pocket knife.
Since the meet I have become more interested in the modern, state-of-the-art, folders. Folders with bearings, titanium frame-locks, steel lockbar inserts, flippers and high-carbite steels. Watching Youtube video’s from Elliot Williamson (http://www.youtube.com/channel/UCue1SJON3WBgfY0KGUNXImw) and John Grimsmo (http://www.youtube.com/channel/UC8SC-01ZKmzTIa2Usn6fexQ) certainly helped spark my interest in this folder genre.
During the summer the Domino came out and received positive reviews. So when I went to Paris to visit Nemo and go to the SICAC this was a knife I was hoping to reacquaint myself with. When I did I was impressed with the build quality and, importantly for me, the lean edge grind. The grind in not in Opinel territory, few modern style folders are, but it is one of the thinnest I have seen on any Spyderco or other modern folder. Good work Spyderco! So, besides all the fun modern bells and whistles, it has the potential to be a good cutting tool too. I decided to get one to give it a spin to see how it would work for me.
First impressions out of the box confirmed what I had seen in Paris. Great build quality! The only thing was that the clip was to strong to easily clip to my pocked. After a little careful bending it is now the way I like it. Time to carry it, use it, and report back…

30/09/2013 at 07:02 (Edit)

___________________________________________________________________________________________

nemosandman
The Domino’s blade is wide but it’s a leaf shape. One of Eric Glesser’s favorite shape.
Here we got a nice belly and a very pointy tip.
It gives you very powerful cuts in wood as the belly works like a guillotine.
This is one of the feature which made the Dodo such a great wood cutter.
The very pointy tip creates almost a recurve edge. It’s providing a great penetration power.
All in all, the blade design seems to have been shrunk to provide great power in a compact package.
More to come soon.

30/09/2013 at 07:11

___________________________________________________________________________________________

JD
Yes, this is a pure Spyderco design!
Some observations after a little carry and use:
– The factory edge will cut newsprint and receipt paper with just a few small hangs but has very little bite while slicing, so it would not cut the plastic packaging material a sample thee back came in for instance.
– I carry mine right side, tip up. When I draw the knife from the pocket I have to make sure my last three fingers are on the clip and not on the lock bar. If they rest on the lock bar the detent is pushed in to the blade to much for it to flip. If the lock bar is free drawing and flipping is fast and smooth.
– Still getting used to how much bigger and chunkier it is compared to what I used to carry.
– The flipper is addictive 🙂

01/10/2013 at 07:10

Spyderco Domino and Pekka Tuominen Urban II

___________________________________________________________________________________________

nemosandman
Oh, That nice belly is really powerful on pushcut in hard materials and the steel CTS XHP is really a great alloy. This is my second experience with it since my Techno.
I have fumbled with my Domino which has fallen on the tiles of my kitchen. I was certain that the tip wuldbe damaged. But no. Nothing. CTS XHP so far is a very forgiving and easy to get scary steel.
I have only used leather yet.

___________________________________________________________________________________________

JD
I have given my Domino its first sharpening. I started with the Norton Medium Crystolon to set the edge bevels. The bevels I put on are at a lower angle than the factory ones. I do not know the exact angle, the hump over the hole was about 5mm above the hone. During this first sharpening stage I noticed that the edge had been sharpened asymmetrical at the factory. The right (back) side took longer to sharpen and ended up with a bigger edge bevel than the left (face) side.
I refined the edge on the other side of the stone, which is a Norton Fine India. Before each sharpening I de-stressed the edge (cut into the stone with the weight of the blade) to make sure I was working on ‘clean’ steel. I noticed that the steel burred readily once the apex was reached and that those burrs took quite a number of high angle, light passes, alternating sides into the stone, to be removed. This might be from the steel being damaged during power sharpening at the factory. This is not unusual and usually goes away after more sharpening. I will keep you posted on developments…
The Norton India cut the steel well but was slow going. Diamond would have cut faster, but this is the only bench hone I have is this grit range. I have the impression that this steel is about as high a carbide steel as you would want to sharpen on this stone.
I finished sharpening on the diamond side of the Fallkniven DC4. I have more experience with using pocked hones so they give me the most control. After more burr hunting I ended up with a nice toothy edge that would whittle hair and easily cut newsprint and phonebook paper. Back in pocket she goes and time to see how this edge works out!

03/10/2013 at 07:26

JD
A few words on build quality: impressive! With the exception of the edge I can not find anything to fault, what should be straight is straight, what should be curved is curved. The blade is perfectly centered. There is no blade play and non of the screws have worked loose after over a week of flipping. The lock-up is at 40% and inspires confidence but is easy to disengage when it comes time to close the knife. The detent sucks the blade into the handle the way a good detent should! Oh, and did I mention she is smooth? Well done Spyderco-Taiwan!

05/10/2013 at 08:22
Reply

JD
Yesterday I sharpened the Domino for the second time. I only used the Norton Fine India stone and it took me 25 minutes to get a sharp edge. It shaved arm hair and easily cut phonebook paper. There were still a few stubborn burrs but at the end the edge formed cleanly. Pretty happy with the results. 🙂

08/10/2013 at 06:49

Folders, Photos

SPYDERCO SCHEMPP TUFF BY ED SCHEMPP – C151GTI – PART 2 – VARICELLE STORIES.

7 Comments

So I went to Italy with my Tuff (named “Varicelle” aka Chicken Pox because of her handle) in my pocket.
And no back up blade but my Paul Watson Victorinox Swisschamp. So Varicelle was on duty.

My idea was: with a blade like the Tuff who needs a fixed blade ?
What possibly would bring a fixed blade over Varicelle ? A better handle ? Yes. Even if the Tuff got great ergos, it’s hard to compete with my Bushcrafter. But the Tuff is easier to carry around.

BTW in the ease of deployment department the Tuff is joining my Millie. The Spyderdrop is so easy: you grap the hole or the fuller or both…
I even started to believe the Tuff is the easiest knife to spyderdrop.
Better, I’m now able to open it with some inertia: a whipping movement from the forearm and the blade is open.
Thanks to what ? The weight of that CPM3V thick heavy blade.
So ZERO complaint about that. What a great folder for quick draws !

Now what are the advantage to have my Tuff with me instead of my Military C36 in M390 ?

Main avantage: quoting Bilbo the Hobbit: ‘Take care ? I don’t care!’
Spyderco Tuff cutting
My Millie is slicer and Lamborghini which needs to be cared with love.
The Tuff is also a Lambo’. On the tractor side.
It is solid beyond records. The Tuff is care free. The edge and mechanism are forgiven.

This is an important factor. Sometimes “Orcs and Goblins” are using your “precious” cutting tools. I do not state my friends are orcs BUT I was able to see some blades ruined in a fistful of seconds by beloved ones. My father in law was able to destroy the finish of a blade in 5 seconds by just showing me how to resharp it on a flat stone !!! Go figure.

I don’t mind that kind of abuse with Varicelle. This is such a relief…
I had convexed the grind for whittling. I knew how that wonderful CPM3V steel would behave.
Good and reliable. But please, use it, be my guest. I don’t mind at all.
(I got a BRKT Bravo 1 in CPM3V. I love it BTW… That steel is tough and easy to maintain.)
So you want my knife to cut a thick pizza on a hard plate? Go ahead ! I will eventually realign the edge on ceramic later. It will cost me… 30 seconds of my time ? If the edge is really dulled. Because CPM3V is like that: forgiving and “gentle”. Only leather stropping are enough for maintaining it. No tricks.

Now let’s talk about THE LOCK.
The RIL (Chris Reeve’s Lock) is not 100% genuine as there is a steel interface. That steel interface is an real improvement to prevent lock wear and sticking lock.
BUT.There is a ‘but’.
That steel interface can transmit energy with no absorption. I mean soft titanium is sticky. Hard steel is more slippery.
A hard palm chock on my tuff’s lock was able to disengage it!!!
Wait a second ? This is the hardest use folder ? How could that happen ??
It happen like on that video:
http://www.youtube.com/watch?v=aj8ZAFo8H6o
(I had not abused their lock. I had used Varicelle for light chopping though. And I do not test my knives by doing hard spine whacks on table. It’s stupid. See the Stupid Video later…)
Now the “vicious part”:
It’s happen to me after some breaking in.
So new models should not have any problem. And it cannot be spot at quality controls.
But it can happen on a phase during ‘breaking in’. It can.

NO BIG DEAL. As all the parts of that Spyderco are engineered for tough jobs. This is not a cheap knife. The axis is monstrous ! The stop pin is HUGE ! The lock bar is strong.
But keep in mind the strength of a lock bar is not linear. It’s logarithmic ! The further the bar engages the less strenght ! The shortest the bar the thinner the range.
But this is only a part of what is happening. On a chock, forces are distributed on a different way than normal uses.
The design is not the culprit. The exact position, the angle, the surface materials combination at that very moment are the culprits.

So eventually how did I cured my Tuff ?
I have forced the lock to engage and disengage again and again. I have continued the breaking in. Until… Three minutes later (!!!) it was reliable again. Locks are working on fraction of fraction of millimeters. Since I did not have any problem anymore.

So, good news, if it ever happen to you: this is NOT a big deal. It’s just a phase. Your Tuff is a hardchore tool. Use it hard and it will do the self adjustments by itself.

I’m not able to disengage the lock of Varicelle anymore with a tap on the back of the blade. And I even tried it on a wooden table many times. Going stupid and destructive for once !
But It is now behind it. Varicelle stays locked.

STUPID VIDEO

So what do you got with a Stuff ?
An elegant design. A reliable tool. A forgiving edge. A fast opening folder.

Mine is convexed and her edge can be back to razor with twenty strops on a leather belt. Yesterday I have cut and process a small tree with her. The heft of the blade is great for light chopping. The convexed edge is great of a choke up wood carving. It cuts deep and with ease.
As convenient as my Lionspy, the Tuff is more forgiving but also very sheeple friendly just by its original looks.
Mine has been used by sheeples with… pleasure. Beyond the “Why are carrying such an heavy knife” to “Please, give my your knife !”
Varicelle is not threatening. Exotic perhaps but not threatening.
I have witnessed kids whittling with her (that careless way kids got to cut wood and cut into mud afterwhile). And they were happy with their results! Asking me for my knife again and again. And me asking them to keep it close and not running with it open…

Abuses:
Varicelle has been thrown with shuriken on a wooden board and it sticks very well.
I have open a chianti wine wooden crate in a breeze.
I have chopped three inches diameter trees.

normal uses:
I have eaten with Varicelle in many restaurants.
It have been borrowed from me in restaurant !
I have let children disappeared from my sight and whittling with it. Ok.
I have let my mother in law cutting beef with it. Ouch !

Anyway, the Tuff is a special knife: carrying a folding light chopping tool in a solid package is a great experience.
And knowing it won’t be damaged by clumsiness (mine or others) is a SUPER plus.

Next review teaser:
I won’t let my Manix 2 in any hands.

    Tuff SPyderco

Folders, Photos

SPYDERCO SCHEMPP TUFF BY ED SCHEMPP – C151GTI – My Folding Kukri

5 Comments

When The Going Get Tough…The Tuff gets going !

I have witnessed the evolution of that knife since the first prototype in 2005. The beautiful fuller was already its signature and I felt, this was a great complement to the hole for opening purpose.
For descriptions and length and weight, please use the link above.

This folder is not my first “heavy duty folding tool”, but certainly one of the most solid. The Gayle Bradley is an hard used cutter.
My Lionspy is another great contender as I have used it as a light chopper many times. But the heft of the Tuff is making that Ed Schempp designed knife a great woodman folding companion, in my own humble opinion. It’s unique.
Why ?
Because I enjoy being able to process wood with some light equipment: my Cold Steel Voyager, my Lionspy and now my Tuff are able to work quick as light chopping tools. Of course it won’t replace a hatchet, a machette, a campknife. But they are a folding “attempt” to create reliable hard used knives. The new fashion in folding cutlery. Tactical means nothing. Hard used knife means everything.

SPyderco Tuff and Lionspy by Nemo

My tuff has been named “Varicelle” or “Smallpox” in French. Why ? Because of its handle. All those “bubbles” give it some kind of steampunk look.
Once closed, you recognized the attention for details of Ed Schempp. Varicelle looks like a perfect oval. It’s a beautiful object even if the beauty is in the eye of the beholder. Just look at that mega huge screw pivot, that massive stop pin, that unique fuller on that thick blade, everything in this knife screams toughness.

Once open, you feel that you are holding a tool not a weapon. Even if the balance is perfect with a sweet spot under your index. This knife has been created to be a reliable companion toward the hardest situation a folder can withstand in a…. farm ! And what is useful in a farm can be useful everywhere. But, thinking about it: the most famous martial artists weapons were initiated by farm tools.
Ed told me he has cut into aluminium tanks without any damage to the blade. I don’t know wahta he was cutting but I trust him to put his blades in pace to test them. (E.G. My Persian is such a great knife BTW)

CPMS3V is a really tough steel. It’s another crucible powder steel. I love the behavior of that steel and its forgiveness toward my clumsiness.
I cherish a great BRKT Bravo and I love how its convexed edge is easy to maintain while being a true laser. Oh I love that powder manufactured steel.
It’s not stainless, but it’s a fine grain tool steel which can stand a lot of abuses.
Having the chance to carry “that” steel on a folding knife is absolutely rare. Another Spyderco premiere.
I had the purpose of convexing my Tuff as I knew how easy that tough alloy was with leather stropping.
So Varicelle has been slowly convexed. Using elbow’s oil mainly.

Eventually the blade on the Tuff is longer than the edge. Again the mighty choil is another Ed Schemp signature like on my Navaja.
You can hold your knife by the blade only, helped by the fuller and the choil, the hardest jobs can be soft on the lock and pivot.
The edge is making that knife very legal. It’s not threatening. Again you got a tool in your hand not a serial killer nightmare.
Yes, but it looks like a kukri and it perform like a folding kukri. And Kukris are famous to be the sacred weapon of Burkhas…
But again Kukris are great tools tunred into weapons. The Tuff’s designer was focus on some kind of G-Shock folder. Not a self defense device. Not a sentry removal tool. The Tuff is just a gentleman farmer’s knife designed by one.

By the way, I don’t have any problem to open it fast. I have changed the clip position to tip down carry. Now I can spyderdrop it, holding the blade by the hole and the fuller. It’s as easy and smooth as with my Millie. The heavy handle helps a lot. The lock bar can be harder than other knives. I won’t mind.
The closing is even easier than on my Lionspy. The meat of my thumb catches the lock release with ease. So I can open it fast and close it fast which is a must in safety for hard used tools in difficult environment. My tuff is reliable. Easy to put in play and easy to remove from sight.
This is all I ask from my folders.

So what do you got ? A CPMS3V folder with RIL Lock in a compact package offering great ergos while open.
Now will come the time of testing.
Stay tune for part 2.


Before convexing.


In between convexing.

Spyderco Tuff by Nemo
Fully convexed.

Folders, Photos

Spyderco Caly3 C113GGY in Super Blue Steel Sprint Run- Grand pa knife is going high tech.

4 Comments

“Yasuki Hagane steel has been produced in their plant in Shimane prefecture in Japan where the high quality iron sand has been produced for making traditional Japanese swords since ancient times. These are three main premium grade high carbon steels (Shirogami, Aogami and Aogami Super) that have been used for making Japanese made field & kitchen knives. Hitachi metal is also known as the manufacture of high grade premium stainless steel, ATS-34 and ZDP-189.Blue Steel is made by adding chromium and tungsten to Shirogami (White Steel) that makes the material more durable and provides corrosion resistance and mostly used for making high-grade Hocho (kitchen knives) and outdoor knives.
Now Super Blue Steel is made by adding chromium and tungsten to Shirogami (White Steel) that makes the material more durable and provides corrosion resistance and mostly used for making high-grade Hocho (kitchen knives) and outdoor knives.”

From http://japan-blades.com/how-to.

I’ve never been interested in the Calypso. Call me names but the lock was “old”. Not the smoothest operating tool… as all lockbaks.
But the Calypso and all its offsprings got a common feature: ergonomy. A thin blade (not wide for a Spyderco after all) in a light and pointy package.
The years (decade) go by. The Caly 1.5 turns into a test platform for the Aogami Super with a first Sprint Run. I was very excited when Jur has shown me that absolutely beautiful folder. But alas to much vertical play for me and that, made me step back.

This is the problem with all back locks but with my Caracara chinese made G10 first generation. I remember falling in love with the first XL Cold Steel Clip Point Voyager… vertical Play. Massad Ayoob first Spyderco folder… vertical play. The Mighty Chinook , first and second generation ? Vertical play.
Oh you can live with that.
But I do not like a tool which got moving parts in the palm of my hand when I’m cutting something hard.

The Caly3 in Super Blue Steel got vertical play but much less than the Caly 3.5 I had tested.

Now the Cold Steel Triadlock is curing that “disease”. That’s why they are so pleasant to use and so reliable to chocks like Fred Perrin has shown us by throwing his mini Lawman repetitively (more than a 1000 throws!) without any failure or even any vertical play.

Vertical Play is a curse. I remember Michael Janich’s “Street Steel” book explaining why to go away from any lateral or vertical play in a folder knife. And I believe every single words Mr Janich is writing. Common sense is more precious than adamantium nowadays.

Ok my Caly3 vertical play is minor. And on a short knife with ergos like a boot knife this is not a major problem. I mean if the lock should ever fail (and that vertical play on locks has been noticed on very very strong backlocks) my precious fingers would be protected by the quillons on the blade: when you are holding a Spyderco folding knife, you are holding it mostly by the blade. Giving all strength and all structure stress directly to the blade not “through” a fragile channel: the pivoting handle. The C36 Military was the first to offer that “boot knife” feature. Holding the knife by the blade is something as ancient as the Roman folding knives you can find in archaeological fields. In the ancient times, the handle was considered merely as a sheath not something to hold your tool… So folding knives were used as hand razor: by holding the blade.

So about the Caly3, this means that I don’t “feel” any important play when I cut on a board for example. This is mandatory for me to trust a folding knife and sticking to short fixed blade for EDC (as you perharps know I love short fixed blade, Ian Grenier’ FIne Urban Cancelled Knife, Fred Perrin’s Lagriffe, my Izulas, My Newt Livesay NRG, my wonderful Fred Perrin / Spyderco Streetbeat and my great BRKT Bravo1… (chich is not that small after all).

Ok, the Caly is sheeple friendly. It got a thin, short, not threatening blade and this Sprint Run got also a grey G10 handle and a stainless steel back spacer. It doesn’t scream “TACTICAL KNIFE!!!” like the mighty Cold Steel Recon 1 XL CLip Point… So I can use it in the plate in a restaurant. nobody notice it and it makes the difference as a matter separator.
The Caly3 clip is the wire clip and this is the masterpiece in the clipping design industry. I got the same of my Sages, my Techno, my Slipits, my Pingo, my Dodo, my Chaparral and they are simply the best. Nothing can get close to it. It may look cheap. But they are the best in low profile, and ease of pocketing. (Let me hammer that the clip of the Southard being the worth of all Spyderco’s clip ever made IMHO.)

The Sprint Run of C113 got a non stainless steel blade. This is something to experiment. I love my 1075 and 1095 and my M2 blades to get stain. A patina is a must IMHO. It gives character and low profile to a bad reputation tool. I first enjoy patina on my 1095 Schrade Sharpfinger almost 20 years ago… The blade feels “natural” to react to oxygen and acids… It gives “beautility” to a very personnal tool.

Now the Grey G10 gives also some kind of beautility to the Caly 3. Mine is dirty and I love it that way.I got Fifty shades of grey… (and with the Games of Thrones fans I should score…)

So what to not love in the Caly3 ?
Even closed that folder featuring Sal signature is radiating honesty and confidence. I remember reading an article about a man saving his baby boy from a mountain lion attack with a Spyderco Caly 1.5 knife. This means confidence in your tool.

My Caly3 is reliable. I can trust it when I need it to cut deep and fast. And I can trust it to get stains in warp speed too. No surprise there. Like an Opinel in carbon steel you know how to clean and oil it to keep it far from rust.
The Caly is pointy. Much more than a Techno. It got almost more edge length than a Native.
Ho, there is something I love: the bulging pivot screw on this sprint run. The pivot screws is falling perfectly under your thumb when cutting horizontally. About ergos the knife is held in full grip like a much bigger knife. On the handle, there is place for four fingers even without involving the choil.
The Caly3 is not a all screw construction and …. I don’t mind. I got no plan to dismount it. I have cleaned it by rinsing it under hot water tap.
It so far so good.

Now about Super Blue. I have re-profiled the blade as I was expecting much better sharpness. no the edge is thin and convexed but still… I got a much better sharpness feeling with my AUS8A blades (Cold Steel Voyagers, Recon1 and Code4) or the CPMS3V on my BRKT Bravo 1…. I need more mileage on Super Blue Steel to crown it. So far it could be 1075, I don’t feel the difference.
So guess what ?
More on patina and old timer steel in the 52100 serie…

Folders, Photos

Cold Steel Lone Star Hunter – I’m a rough boy…

7 Comments

Cold Steel Lone Star Hunter

Okay.
We European got some kind of American dreams: Cowboys and Indians….
From Die Hard (Cow boy) to First Blood (Indian), the dream doesn’t want to die.
Spyderco is a very international company, building knives like Ferrari is building cars.
Cold Steel is also very international, looking and also giving tributes for designs from Africa, Spain…
But both those companies are pulling my sensitive string when they give tribute to the American Spirit.

Spyderco gave us the Chinook when Cold Steel bring us the Trailmasters.
Testa rossa vs Gran Torino ?
OK, Cold Steel also is bringing very cleverly engineered short blades and especially the greatest improvement on lock back: Andrew Demko‘s Triadlock.
Oh how this lock is sweet: fully ambidextrious and solid as a rock and … easy on manufacturing tolerances. Pure genius. A milestone in knifemaking.
In one inspired move Mr Demko transformed the solid Cold Steel Voyagers into Über Hulk Solid Cold Steel Voyagers.

Now Cold Steel is releasing a lot of new designs with the Triadlock and many black tactical beauty. (This Recon Drop Point !!!)
But my eyes caught two releases those last monthes: the Mackinac Hunter and the Lone Star Hunter.
They both look like Old Timers with those kind of Delrin faux stag horn scales. And as I love Schrade Old Timers and Uncle Henry’s…
Also they could go well with Samcro’s riders, those modern cowboys…

OK to how this Lone Star Hunter looks ?:
BIG !!! I was very surprised on how long and sleek and sexy this blade would be.
SMOOTH !!! Open with a flick of the wrist and close in a breeze…..
OUCH !!! Yes it closes so smoothly and without any choil to protect my finger… I get a nasty cut. I need to learn how to rest my index nearer to the axis when I close that baby.

The blade is 3,5mm thick, it looks like 4mm. The bowie clip and flat ground blade is gorgeous like a modern interpretation of the Navaja.
Solid feel. No play.
A little on the heavy side. But I love heavy metal on traditional hommages.
Well balanced, perfectly executed: Taiwan plants are the best in the outsourcing knives manufacturing.
My Lone Star Hunter is an eyecandy and über solid workhorse.

AUS 8A Stainless may be not as sexy as M390, CPM M4 or ELMAX but as far as I am concern my XL Voyager keep a decent edge and is easy to keep razor. The grind is thin and for a full flat ground, you got a great sliding machine. The blade is also very pointy. Not like my Pointu or my Lionspy. You never jow when you will ned to pop a balloon.
Again, heat treatment is as important (and even more) than the steel composition. This AUS 8A is perfect for a workhorse at a budget price.
Yes, that knife is really easy on your wallet. This is something to consider. I love “blue collar” tools. My grandfather was a farmer and was using is Canif (“K-nife” come from that word BTW!) from cattle surgery to whittling. It was his everyday workhorse, solid, reliable and easy to maintain in good condition.

The shortcomings of my Lone Star Hunter so far:
the clip was short and to tight to be really useable. Once clipped to a pocket the knife was nearly impossible to retrieve. So I bend that clip and now it’s OK. Easy peazzy lemon squizzy…
The spine (back) of the blade was square enough to spark a fire on a rusty nail but I like my spines rounded for thumb pushing cuts. So I have grinned it with a diamond rod in 15 minutes.
The fact it is all steel framed and not skeletonized can be a shortcoming for those who loves their folder light in the pocket. This is heavy metal, no aluminium or titanium scales. The handle can get hot and chilling as almost a full metal. No bolster the delrin slabs are screwed on the metal. Easy to clean.
Oh, the lock can be hard to unlock. Perharps it needs a little wear but for safety reason now it requires two hands to close it. My Spyderco Native 5 backlock or the XL Voyager are closed by gravity and your index finger is protected by a choil or a ricasso of some sort. Here you need to move your finger forward the axis (less strenght in the unlock procedure) for unlocked the ultra sharp blade to start to fall. And the slippery handle do not help.
The Lone Star Hunter is a knife wich needs to be manipulated with extra respect. I open and close my Spyderco Military, or Persistence without thinking about it. The LSH is asking you to be careful during the closing procedure.

So the Lone Star Hunter is going to be a great pocket knife for EDC for those who ask a ultra solid folder, even if it is a little on the non political correctness side: the lenght of the blade is impressive as the Blade handle ratio is close to 1… But as is Cold Steel CEO Lynn Thomson: unique and impressive. Also Texas does not have the same knives regulation as many other places on Earth so this folder is a real hommage.
Compared to those “Tactical, Black G10, Black Blades/ Pry Bars” , this is a knife which got a lot of personnality and especially gives you a lot for the money spent. This one is my second “Texas” inspiration folder with the extraordinary Gayle Bradley. There is something genuinely “19th Century” Texan about this design but served with an ultra song lock. A knife which asks for respect and hard work.

PROs:
Triadlock.
Thin flat ground clip blade
Confortable handle (no hot spot)
Great GC.
Beautiful lines.

CONs:
Can be to heavy for some users
to slippy for some
The clip is to tight.
To long blade for some juridictions…
The lock can be hard to unlock.
No choil to protect your finger when the blade is closing. (better two hands closing)

Official pages is here: http://www.coldsteel.com/lonestarhunter.html

Notice the fresh scar on the finger. You need to be more careful than I when closing it.

The triadlock pin.

Oh yes you can abuse tha knife.


Oh and it was able to cut through the bottle’s butt like a breeze. So the grind is thind enough… 🙂

 

Folders, Photos

Spyderco C136 Persistence Blue Exclusive : My China Blue !

3 Comments

SPyderco Persistence Blue SPrint

I love the Spyderco Persistence. Perfect size to be an EDC. 70 mm is city friendy.
Great ergos. Solid feels. Hidden choil. Smooth, sharp and ready to be used hard.
8cr13Mov is not the snobbish steel but it takes a great razor edge and is quite strong and forgiving.
No blade play. Full flad ground. Skeletonized liners. Light in the pocket.
The Persistence got only great reviews.
When I have learned a Spyderco’s C136 Persistence Blue Exclusive Run will be available, it was the occasion to buy another one. This one to be kept and used.
The clip is a little on the tight side and I have sanded the G10 under it but for the rest the Persistence is delivered with high QC and no flaw.
The Blade is centered. The action is fast and smooth and the edge even and razor sharp. The Royal Blue G10 is the little plus for been accepted by sheeples.

For a workhorse on a measured budget this knife is really a gem. I love the “cowboy knife” equation: cheap but reliable. So you can use it hard with no after thought. This one if ready for dirty jobs and easy to clean with its all open construction. Mine will be used as an eating knife, which means an hard confrontation with the ceramic of plates…
Again like in my previous review, those snobbish bushcrafters should give a chance to that little knife. Perfect for camping, whittling and food processing chores. Hunters of course like fishers should be aware of the polyvalence of that tool. Oh, I really love my China Blue and it can be proudly used next to my S90V Paramillie ! This is like jumping from an Aston Martin to a Beemer but both are reliable and fun to drive.

And yes there is one hair on my blade pictured. My Persistence is really razor popping hairs sharp…:-)