Tag Archives: FRN

Spyderco Chaparral C152SGY – For the Fierce and the Furious

Like I had mentioned in the glimpse review of the Serrated Chaparral, this little, thin folder is built to punch above its weight. Thanks to its sturdy construction and relatively strong stainless steel — the same type found on my Cold Steel Recon 1 XL — it can be tested and used like a much larger knife without compromising performance.

Solid steel, sturdy lock? Not much difference from a larger knife, in fact. 😉

So far, I’ve put the knife through its paces, cutting anything I could, and maintaining the edge with some Jade stones (see first picture). The mechanism shows no signs of play in any direction — rock-solid performance.

The plastic is thicker that the blade.

As you can see, the serrated edge is a chisel grind, which means it tends to deviate slightly to the right of the material being cut, much like a fin in water. I started the cuts with a bit of sawing, then transitioned to push cuts, and the knife effortlessly sliced through the thick plastic used to form the bottle.

This little knife is fierce in term of cutting performance. It is a lot of power in your pocket ! It is a pocket chainsaw !

The serrations really shine on the plate. You can push the knife hard against ceramic surfaces, and if the points ever need a touch-up, a few passes on a ceramic corner — or in my case, a jade corner — brings them back like new.

I have been able to reach razor level just by passing gently the Jade on it.

Actually it is fun to enhance the edge.

Actually, this is a bit of a comeback for me with serrations, dating back to my AFCK experience 25 years ago. Back then, I mostly used partly serrated edges, which helped initiate cuts on hard materials.

With a fully serrated thin blade and no plain edge, I initially wondered how useful it would be in the kitchen — especially since my wife’s favorite knives are Victorinox fruit knives (serrated). But it turns out, neither fruits nor vegetables can withstand the sharp, wavy edge of the Chaparral.

Funny enough I have been able to strop the edge of the Chap by using the side of the leather belt. CTS XHP is a steel which loves leather in my experience.

All in all, so far, so good. The Chaparral delivers impressive cutting power. Its thin, fully serrated edge is unique within the Spyderco line, pushing the design out of its comfort zone — and for a “knifeaholic” like me, that’s pure fun.

The next step is to trust this little knife enough to take it on a road trip in Italy — handling food prep, wood, and low-profile carry as my only pocketed folder. The Chaparral will make its return in May.

Spyderco Para3 – Let there be light!

So here I am, minding my own business.  (Always wanted to start a review with that kind of sentences… à la Michael Di Mercurio.)
I love heft. A heavy knife is sexy in my book.
Bought in the 80’s, one of my German version of a Buck110 was an anchor and I loved it.
I dig the Fred Perrin PPT for its massive butt balance but I’m quite certain Fred would love a lightweight para3 as he loves to hide light tools on himself. 😉

But now.

Now Spyderco has always been about Performance. Performance in geometry, ergonomics, in locking mechanism, steel’s heat treating, choice of materials… and refining refining and refining… Constant Quality Improvements they say.

That Para4 lightweight is born from that CQI state of mind.
Remember the Military ? It always been a lightweight because every kilograms counts when you are carrying a weapon and ammo. At first the C36 was using only one nested liner if I remember well. The fight against weight was hard and not understood by many.
Just look at some heavyweight folding brick found nowadays… No comment.

So Sal loves sport cars and racing boats. His passion for sailing is oozing from his designs.
He has just release a lightweight version of his Police knife.
That Para3 got only one liner like is first Millie.

So lightweight is an obsession as much is lock reliability in folders.
Just like in the Ford V. Ferrari (Le Mas 66 for Europe) james Mangold’s movie.
BTW Spyderco has just release a Lightweight Sage with a compression lock too.

You need need to have a great confidence in the materials you are using too to implement a Compression lock in a plastic handle because the lock needs tension. But FRN is considered as strong as aluminium and Fiber Reinforced Nylon is something Spyderco explores and masters for more than 25 years now.
I remember self defense instructors driving with their trucks on their FRN Delicas (pre liners version) just to show how strong this lighweight folders were.

The lightweight handle brings also great balance to a very “alive” knife. The Para 3 lightweight is something your enjoy playing with. It can be open and close it in a blink. This is really fun and elegant.

The texture is perfect when my hands were wet and greasy. The Bi Direction Texturing is perfect near the pivot: my thumb meat is gripped by the FRN in the forward direction.
It feels so secured in my wet hands ! Also the bi-texturing works in the other direction for pulling the knife out of the pocket. In term of security, not dropping your tools which is like glued in you hand, it is a must. The wonderful Carbon Fiber of my Kapara can not compete with that. It feels like a soap compares to my Para 3.So for the pragmatics, you can reach for your knife, pull it out and use it even with oil on your hands. This is so great and really rare in the knife industry. Sal’s inventor’s mind again.

Like many compression locks including the beautiful Kapara,  you can get soared hands when using the knife without gloves. It comes form the area on the top of the pivot which bites your hand skin. My friend Pascal got reported blisters from his Paramillie 2 for the same reasons. The space between the thumb and the index needs to have a surface to rest or it will hurt. Some Youtubers got that issue when cutting ropes for edge testing too.

This details has been featured in the Ray Mears Wolfspyder. You can use your knife for hours !

See the difference ?
Whittling and bushcrafting ask for the maximum of confort.

Also look at the C36 Military: again there is a surface to rest your hand avoiding soar and blisters hence its great ergos when whittling.

So let assume the Para3 is a light user or at least design as such. Nothing bad about it they are plenty of other designs and even better great fixed blade like Puukkos when working on wood and hard materials for a long session.

But what a great light user it is. It is versatile. With a powerful blade and solid point.
Easy to clean. Anti slippery handle. Non threatening design. Light and invisible once clipped. What not to love about it ? This is a milestone in my book.
And I do favor heavy knives. My Maxamet Para3 got a copper handle.

I have thinned the edge to my taste.

And now the leather is enough to keep it razor. M390 heat treated by Golden is a must.

Para 3 Lightweight DLT Trading Exclusive – C223PRD – My Little Red Riding Hood !

It is light, it is red and it is cute and can skin a wolf or granny’s apple ?
DLT Exclusive M390 steel blade on the Para 3 Light plateforme has hit the old continent after NOT taking any shortcut… It was stuck in Paris airport for a week !Action is perfect. The blade is centered. Drop chute works perfectly. This DLT Trading Exclusive is clicking all the right buttons as I was not really excited to test this knife without some spicy exclusive steel.
Bringing the compression lock to the FRN is a Tour de Force Eric and Sal can be proud of.
At 69 grammes it bring a very strong little big knife into the “pocket and forget” realm.
This is going to be a very Sheeple friendly knife thanks to its red scale and deep carry clip.
I love high performance blade on FRN. My Manix Lightweight is a CPM 110V version and my favorite holiday knife as it is easy to put in a luggage and keep its sharpness for weeks.
This is Little Red Riding Hood is destined to de-throne it. Less moving parts, easier to clean. Very impressive quality !
And M390 heat treated by Spyderco is a sure value since 2012 ! :-)More to come soon as right in the pocket it goes ! Riding !“But Grandmother! What big teeth you have,” said Little Red Riding Hood her voice quivering slightly.My own copper Maxamet Version is just a really heavy weight.SO LIGHT…
“The better to eat you with, my dear,” roared the wolf and he leapt out of the bed…Deep carry clip and excellent lanyard hole placement.

Pingo Star…

IMG_6523Another inspiring knife but what more to bring to the table about the Pingo that has not yet been written either in Spyderco’s catalog or in captain Nemo’s great Pingo review ?

Here we go…

 

Parsley stem cut very neatly tree times thanks to the N690Co stainless steel full-flat ground blade. Next time i’ll have to test in supplement of parsley, Sage, Rosemary and Thyme! More seriously recent outdoor chores have been cut a branch of mexican orange blossom and wisteria vine; really simple!

 

IMG_6503
Lillian is jealous as Pingo gets along very will with Stitch.

IMG_6506
Perfect baguette push cut.

 

IMG_6502
Another tribute to 1966 (after Simon and Garfunkel) and to the first round debate of the last french presididential election: Pingo and pudeurs de gazelles!

 

Pingo and the pumpkins: the blade’s belly shape concentrates cutting power and Pingo sinks in with ease. Sorry Linus!

 

IMG_6520
The wire clip enables Pingo to be snug real deep in the pocket.

 

Now we know whom Prokofiev’s three oranges really love!

 

IMG_6546
Just before the soup, where is Pingo?

 

Pingo Star and the groupies!