Tag Archives: Outdoors

For another fistful of minutes – De-shouldering the Spyderco Sage Salt Part 2

Let’s go back to the same process but adding 15 minutes more can be a game changer in term of geometry. But let’s be clear this is typically the Pareto law which says: “The Pareto principle states that for many outcomes, roughly 80% of consequences come from 20% of causes.”
It means that in 15minutes + this new 15 minutes it is not the most efficient as 80% of the job was done during the 6 first minutes last time.
But those added fistful of minutes are a little bonus to even the bevels.

As you can notice I have concentrated my thinning process mainly on widing the bevel.

10 minutes later, I got a more even larger bevel which should go shining after some leather stropping.

On another fistful of minutes, I will work on the tip but I like to keep some material here.
Now I’m basically dealing with a flat grind with a convex edge at the end.
In Japanese a convex grind is also called a hamaguri grind. Literally this means: clam. This name comes from the convex way the side of the shell moves to the end. Exactly like the full convex edge. A full convex grind is sometimes also called an appleseed grind. Again because of the pointy tip of the seed of an apple.( I’m a fan of  アップルシードa Japanese manga series written and illustrated by Masamune Shirow.)
But for now it is much than satisfying in terms of whittling and dealing with hard maetrail to cut.
The edge goes deep in every push cuts and the high FFG blade five a lot of control for powerful results.

(Badge designed by Guillaume Xais)

So far my initial impression are confirmed: the Sage 5 Salt is a keeper and another 3 inches blade length Spyderco to rule them all like the Delica 4, the Native 5 or the Para 3 or even the UKPK ! All are Sal Glesser’s children (The Para 3 paternity is shared with Eric !)


It is perfect in all aspects – sharp thin blade, centered, strong detent compared to the Military 2, no blade play, suuuper smooth.
The Sage5 is the best implementation of a compression lock I have ever had… Perfect tolerances and no lock stick.


The open-backed construction allows easy cleaning. This Sage 5 is really asking to be used and, thanks to its yellow handle, retrieved even on the forest or ocean floor. Really a must have 3 inches knife for all occasions.
And I’m a huge fan of the Native 5 and the Para3. But this Sage 5 seems to lead the pack.

Manix 2 Lockback C101MBGP2 — Native 5.2 Grand Daddy !

This version of the Manix is equipped with one of the strongest lock ever produce by Spyderco in a light package. We are touching here a “Knife of Excellence” and one of the best Eric Glesser’s design. Sadly it is discontinuited in 2019 but this is also the last chance for you to get an absolute fabulous workhorse at a great price. Mine came for 99 dollars…

Can you imagine better bargain for an all made American knife of high performance ?

The operation of the lock goes deep in the notch while unlocking.
And the G10 is factory smoothed (I have used 800 grid to get it even smoother later)  and the action is perfect. Lockback lovers can only fall deeply in love with this one.

The pivot screws are huge even compare hardchore folders like the Yojimbo2 and it is only a part of the enhanced strength of this version as also the blade is a little thicker than normal Manix 2 version.

Here the blade thickness is 0.145″ (3.7 millimeters)
against the usual Manix  thickness of 0.125″ (3.2 mm) !!
Half a millimeter in black thickness is a simple way to have a stronger blade.

G10 is extraordinarily strong and with such thick scales this version of the Manix do not need any steel liners which can rust or get dirty too easily, especially if they are skeletonized !! So this thick G10 use is a great plus in my book: the Manix 2 Lockback is easy to clean and easy to check for grim … It’s a plus for hunters which use their knives in the fiels were hair and blood can get inside the handle. I should also mention than this one, like all my Native 5 got ZERO vertical play and his so smooth it is fun to flick open.
Also don’t forget you can make stealth fixed blade (even Fred Perrin made Balisong’s blade and handles) only with G10: this is a real solid material.
Here the blade is made of S30V. Spyderco knows how to heat treat than steel so this is a no brainer.

The plain stell back space and thick G10 slabs of the handle are just wonderful to avoid blisters. This is where you recognized a tool you can use hard without hand sore.
The balance of the knife is also improved with this full G10 construction, the sweet point is just under the second horn of the handle not the one of the choil, the other further back.
Well it is a lightweight linerless handle construction, fine-textured G10 scales and a stainless steel backspacer ! There is no lateral movement. You know my favorite expression “built like a tank“… so here we go !

The tolerance and the QC are really high. The action is smooth and the blade locks with a firm “KLAK!!”

As you can see, as much as I love the Shaman design, this Manix 2 is the true daddy of the linerless G10 version of the Native. Again a very solid and light EDC.
In both the ergonomy is at its zenith: large choil, no jimping madness the handle spouses your palm.

Both are made in Golden, Colorado, a plant with now very high tolerance and excellent quality control: the blade is perfectly centered.

So what do you got here ? A incredibly solid and versatile outdoors knife ! Easy to clean and maintain, rock strong locking system and of course the full flat ground leaf shape blade which is a must in cutting control. Strong lock, stronger blade, great ergos… This is really a shame this knife is discontinuited …
Perhaps its reincarnation can be found in the Spyderco Chief found in this review from April 2021.

https://nemoknivesreview.com/2021/04/01/native-chief-rex-45-sprint-run-c244gbore-the-joker/

20210401_130822-01.jpeg

“We were sanding in the rain – like we invented sanding
There’s a light in the sky from a million street lights
And we danced all the steps from all those old time movies
Rolling down the hill with laughing hearts…”