Spyderco C41GPFGR5 Native 5 — A Smooth Operator.

20171208_130139-012017345095.jpeg Every Spyderco’s fan needs an all American Made Native. Why? Because it’s one of the short folders well designed to accommodate every type of hands. It is like a super Delica: wider, stronger, with zero vertical play and as recently I have offered a Native to a friend who use it for hunting, I needed a new one. There is a lot of choice those days, with a lightweight version, even with a Maxamet blade. Maxamet is one of the new Über Super Steel and I have a Para3 ordered with Maxamet. There is also a carbonfiber version with S90V and even one to celebrate the 40th Anniversary of Spyderco with Damascus blade, also a S35V blade with G10 and one with a flutted titanium handle… Many choices. 20171208_120241-011309705577.jpeg Anyway this Knifecenter Native special edition brings one of the most amazing steel available: S90V on a stunning dark green smooth G10 handle. In the 80’s Phil Wilson was making fillet knives in CPM420V (S90V previous name) and find out it was exceptional in terms of edge retention for filleting salmons. It’s not a new steel but certainly one of the uncanny in terms of behavior: it looses it’s razor edge fast but seems to keep a keen working edge forever. Spyderco use diamonds wheels to work on it and it’s really a steel which refuse to give away its molecules. So you can use it on cardboard and any abrasive materials without worrying to lose its edge. But what that Knifecenter’s exclusive Native brings also is a lighter construction for the handle: they are no steel liners. The slabs of G10 as thicker for good measure. You can notice also the construction is very cleverly made as in hole screw holes for the clip (they are 4 position you can use, tip down, up on both side), you can see some steel. It means they are hidden nested construction under the G10 slab. 20171208_120329-011500186881.jpeg But the only steel parts visible are the spacer and the lock (pictured here before sanding). It makes a very clean design. And also a knife more impact resistant. I have had steel liners knives warped after a fall. A tiny tiny change which made the blade touch the liner. You oblige to bend it back. Also steel liners are a place were rust can appears and you cannot spot it. So the more G10 the happier I am, as I need to rinse my knives often under the tap. Also the balance it now just perfect: just behind the pivot. Also there is only 2×3 screws in its construction, the pivoting part of the lock is a pin not a screw like on the majority of Native. You can find that pin on the lightweight versions, but also the new carbon fiber version C41CFFP5 which also share a S90V blade… Again, the less screws, the better. (Screws can get loose and be lost) This is the same kind of construction found in Cold Steel Recon 1. But also, the G10 in the Native is smooth as a polish piece of ebony. This will save your pocket’s lips, trust me on that. They are jimping on the blade, on the top and on the choil so there is no problem with wet palms to held the knife. G10 is an amazing material (Glass fiber mixed with epoxy) and I love to sand it to my taste. But this time I will focus on the edges. Again, be careful not to breath the dust of G10, it’s very not good for your health.

 

At first I wanted to rounded the handle like the new Shaman (a bigger version of the Native with a compression lock) but the second screw of my Native is too close to the edge. Rounding it would be an issue. At least I wanted to feel no sharp edge under my fingers. The Native did not have sharp edges, it has some very nicely squared angle like a musical instrument but to sharp for me. Even if It gives some kind of Bauhaus style to the handle. Very classy. 20171208_125932-01358522911.jpeg Anyway, sanding is a way for me to appropriate that knife, to custom it to my taste. Rare are the knives I did have the urge to do it but it’s also a pleasure to twist it to my likings and I prefer it that way. 20171208_125928-01124803101.jpeg The Native is, like my Delica, my Falcon, my Techno, my Lil’Nilakka, a locking non threating knife I can carry in the city. It’s in my eyes a little “Clip-it” perfect to be EDCed. So I will keep the black clip as it gives a very low profile for a knife which is not deep carried. We will see how long the black coating will remain.

20171210_130738-011515207884.jpeg20171208_142047-01757854268.jpeg And of course it was able to push cut through a plastic bottle butt with ease. More to come soon. 20171208_130333-012021035791.jpeg 20171208_162319-011347483770.jpeg

Advertisements

4 Comments on “Spyderco C41GPFGR5 Native 5 — A Smooth Operator.

  1. Pingback: Short Locking Folders — A plethora of choices ! – NemoKnivesReview

  2. Pingback: About Locks — How to choose ? – NemoKnivesReview

  3. Pingback: Spyderco C81GPCW2 Paramillie CPM CruWear KnifeCenter Exclusive — Another Smooth Operator. – NemoKnivesReview

  4. Pingback: Manix 2 Lockback C101MBGP2 — Native 5.2 Grand Daddy ! – NemoKnivesReview

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: