Tag Archives: Urban

Spyderco C41GPFGR5 Native 5 — A Smooth Operator.

20171208_130139-012017345095.jpeg Every Spyderco’s fan needs an all American Made Native. Why? Because it’s one of the short folders well designed to accommodate every type of hands. It is like a super Delica: wider, stronger, with zero vertical play and as recently I have offered a Native to a friend who use it for hunting, I needed a new one. There is a lot of choice those days, with a lightweight version, even with a Maxamet blade. Maxamet is one of the new Über Super Steel and I have a Para3 ordered with Maxamet. There is also a carbonfiber version with S90V and even one to celebrate the 40th Anniversary of Spyderco with Damascus blade, also a S35V blade with G10 and one with a flutted titanium handle… Many choices. 20171208_120241-011309705577.jpeg Anyway this Knifecenter Native special edition brings one of the most amazing steel available: S90V on a stunning dark green smooth G10 handle. In the 80’s Phil Wilson was making fillet knives in CPM420V (S90V previous name) and find out it was exceptional in terms of edge retention for filleting salmons. It’s not a new steel but certainly one of the uncanny in terms of behavior: it looses it’s razor edge fast but seems to keep a keen working edge forever. Spyderco use diamonds wheels to work on it and it’s really a steel which refuse to give away its molecules. So you can use it on cardboard and any abrasive materials without worrying to lose its edge. But what that Knifecenter’s exclusive Native brings also is a lighter construction for the handle: they are no steel liners. The slabs of G10 as thicker for good measure. You can notice also the construction is very cleverly made as in hole screw holes for the clip (they are 4 position you can use, tip down, up on both side), you can see some steel. It means they are hidden nested construction under the G10 slab. 20171208_120329-011500186881.jpeg But the only steel parts visible are the spacer and the lock (pictured here before sanding). It makes a very clean design. And also a knife more impact resistant. I have had steel liners knives warped after a fall. A tiny tiny change which made the blade touch the liner. You oblige to bend it back. Also steel liners are a place were rust can appears and you cannot spot it. So the more G10 the happier I am, as I need to rinse my knives often under the tap. Also the balance it now just perfect: just behind the pivot. Also there is only 2×3 screws in its construction, the pivoting part of the lock is a pin not a screw like on the majority of Native. You can find that pin on the lightweight versions, but also the new carbon fiber version C41CFFP5 which also share a S90V blade… Again, the less screws, the better. (Screws can get loose and be lost) This is the same kind of construction found in Cold Steel Recon 1. But also, the G10 in the Native is smooth as a polish piece of ebony. This will save your pocket’s lips, trust me on that. They are jimping on the blade, on the top and on the choil so there is no problem with wet palms to held the knife. G10 is an amazing material (Glass fiber mixed with epoxy) and I love to sand it to my taste. But this time I will focus on the edges. Again, be careful not to breath the dust of G10, it’s very not good for your health.

 

At first I wanted to rounded the handle like the new Shaman (a bigger version of the Native with a compression lock) but the second screw of my Native is too close to the edge. Rounding it would be an issue. At least I wanted to feel no sharp edge under my fingers. The Native did not have sharp edges, it has some very nicely squared angle like a musical instrument but to sharp for me. Even if It gives some kind of Bauhaus style to the handle. Very classy. 20171208_125932-01358522911.jpeg Anyway, sanding is a way for me to appropriate that knife, to custom it to my taste. Rare are the knives I did have the urge to do it but it’s also a pleasure to twist it to my likings and I prefer it that way. 20171208_125928-01124803101.jpeg The Native is, like my Delica, my Falcon, my Techno, my Lil’Nilakka, a locking non threating knife I can carry in the city. It’s in my eyes a little “Clip-it” perfect to be EDCed. So I will keep the black clip as it gives a very low profile for a knife which is not deep carried. We will see how long the black coating will remain.

20171210_130738-011515207884.jpeg20171208_142047-01757854268.jpeg And of course it was able to push cut through a plastic bottle butt with ease. More to come soon. 20171208_130333-012021035791.jpeg 20171208_162319-011347483770.jpeg

Massdrop x Ferrum Forge Falcon S35VN Folding Knife — Flipping Modern Lady/Gentleman Knife at a bargain !

20171010_113323-011525776241.jpeg
(Fresh from out of the box)

As my friend and co author JD I had ordered the Ferrum Forge Falcon for 124 dollars. Titanium handle à la Sebenza (* the RIL is a South African invention ) with steel insert in the lock to prevent excessive wear, S35V blade with high flat grind, reasonable size for the city. And a two main screws construction ? What not to love ?


(Here with a new convexed edge the day after)

This was a first time for me with those companies. The knife has been made by WE knives in China and designed by San Diego based Ferrum Forge.
124 dollars for a knife this quality, this is almost the third I would normally pay.
This kind of excellent ratio price/quality have been noticed on the Megalodon folder.
And like the Meg, the only flaw on my Falcon is…. the clip.

 

 

First thing I have noticed: it was smooth as my ZT0562CF. It fires easily. A lot of work has gone on the blade and the handle to smooth everything. It’s as good as Taichung factory in the attention to details. It runs on ball bearings and the detent is perfect on mine. The blade feels heavier than the handle, it gives a nice momentum.

Zero play in any direction. The handle is smooth with its rounded edges and so nice under the thumb. No hot spot even if the jimping are quite aggressive. The blade is chanfered on the right places making a very precious package.

 

 

Second thing I had noticed is the great balance. The knife is perfectly balanced. The blade looks wider than the thick titanium handle.

20171010_113206-011497905212.jpeg

See how small it is ? I even think it would be a great knife for smaller female hands. For bigger hand it would be a three finger handle unless using the big choil.
This big choil is part of the charm of that design and it could be some kind of Native hommage: thick handle and false edge drom point blade.

20171010_113217-011997002469.jpeg

It’s about the size of my beloved Wolfspyder but more elegant. Let’s not forget Spyderco places function before the look. But the wide blade on the thinner handle does a lot in easthetics. The hole in the blade is purely for the looks and to remove some weight, you won’t open he knife with it. OK, you can do it but this is not made for that.
Also the large choil can be a problem when you cut ropes or strings and they get stuck into it. But the Native 5 got the same issue, it’s no major when the finger is in the choil.

 

 

The insert of steel in visible and the lock is new and the blade is perfectly centered.
As you can notice the titanium notch to bend the integral liner to create the lock is not on the outside but inside. This is pleasure to keep the handle smooth.
This notch combine to pocket clips often get caught in the pocket lip while drawing. It was the case of the Megalodon or even the Slyscz Bowie where I had changed the clip size !

20171011_111117-0123625350.jpeg

20171010_113443-01383379047.jpeg

Right out of the box the knife is not shaving but the edge is thin and the geometry is good. It will be a matter of minutes on ceramics to get to the sharpness I want.

Only the clip is an issue. Like on the Megalodon, this is the only flaw but unlike the Real Steel flagship, I will get rid of the Falcon clip if it bends and carry it in the pocket.
First this clip is too thick and is not going enough deep inside the pocket. It has also a tendancy to bend, So we will see how it will go.

20171010_113511-01856726999.jpeg

20171010_131438-011913492656.jpeg

Compared to my Delica, you can notice it is even shorter.

20171010_131510-01126596164.jpeg

And delica is a tad longer in edge value.

 

 

Now its thick handle makes it very confortable in the palm for hard cuts.

 

 

You can see the attention to details on the titanium spacer and the pivot.

page_20170419105825

Two screws construction. The pivot and handle. Add the two clip screws and the two from the steel insert and a pin for the spacer but after all it is a very clean design.

“The Falcon’s 2.9-inch drop-point blade features a sizable choil for index finger placement when choking up. The spine has a concave cutout offering a natural thumb rest for a forward grip. As far as hardware, the Falcon has been crafted with the best materials on the market. Thanks to titanium’s spring properties, it makes for a safe and reliable frame lock that is almost impossible to accidentally disengage. The hardened steel lockbar insert won’t wear out in the long haul, drastically increasing the folder’s longevity. Holding the knife together is a titanium backspacer, bead blasted in gray. Also notable is the titanium clip, which has been adjusted for tension so that it stays put on the go, but it won’t rip your pants apart when taking out the knife.”
From the Massdrop page.

 

 

Compared to the ZT0562CF the Falcon can sustain the comparaison. But the clip in the ZT is one of the best ever made making the big folder easy to carry.

 

 

Sharpening is OK. CPM S35V is not the easiest steel to deal with but it can hold an edge if well heat treated. After diamonds, ceramics and leather, my edge is now convexed and the high flat grind gives deep cuts.
This is something wich needs to be tested on a long run. So more to come soon… But so far for the price 124 dollars shipping including, this is a great bargain and a beautiful knife especially compared to over marketed knives…
And once convexed the edge was able to cut through the 4mm plastic butt of a 2 liters Coke bottle. Excellent !!

 

 

*(Like…. the 300 dollars Urban S35V and Titanium handle from Canadian Robert Young Peyton claiming the Integral lock is an American invention when, Chris got an South African Award for his Pre Sebenza in 1987, move to Boise in 91 and get naturalized in 2001…The Integral lock is a South African invention by Chris Reeve !! )


Cutting the leaves of sucres…

Slicing the dried duck breast.

Removing the fat.

Dicing the cantal cheese.

Splitting fresh figs…

All the ingredients are ready. Add some sauce mixing olive oil, mustard, wine vinager and soja sauce.
The soft texture and fruity taste of the young cantal combine particularly well with figs and duck breast. But you can replace it with other cheeses, for example, tomme de Savoie, salers or laguiole.

JD got also a Falcon but he did not like it: here is review.
https://nemoknivesreview.com/2017/10/14/the-falcon-has-landed-by-jd/

Choosing a knife for the city.

You don’t need a reason to carry a knife.
Whatever they ask you, just lie or tell them what they want to hear.
In the woods or in the countryside carrying a knife, whatever your gender, is wise.
But in the city ?
You really think you will defend yourself with a knife ? Let’s forget about it. A chair, a stiletto shoe, an ashtray will be better defense tools if you know how to train your mind first. And be prepared mentally whatever your gender, is wise.
Knife is not the best tool to get away of trouble. It’s like playing with matches in a gaz tank. It’s used by madness and idiots to create horrors. So unless you want to be an idiot.
Since knives, cheap and ugly dull knives, are often used to hurt people. Worst, some people think knives has been used when they were not even in history.
An example ? When Lucheni, a madman, has stabbed the Empress Elisabeth of Austria in Geneva he did it with a file. “There was no blood on the file and the tip was broken off, which occurred when Lucheni threw it away. The file was so dull in appearance it was speculated that it had been deliberately selected because it would be less noticeable than a shiny knife, which would have given Lucheni away as he approached.”
So you want to carry a knife in the city. It’s your choice, your business. Nobody else business. Your freedom of choice. In those days where metal detectors are common and official journalists are scanned all over their body before filming some president from ten yards away, when policemen can search you with no good reason because of the state of emergency… you better carry something which is small and sheeple friendly.
Better: you should conform with the laws of your country.

Younger I felt some kind of thrills being an outlaw. My first knife even was a folding AF dagger from Gerber. Go figure ! But later, I have found it is more fun to be lawful and cleverly respect the rules, because it gives you the occasion to try new designs and new makers. Of course you can always carry a Swiss Army knife. I almost never do. It’s in my bag not in my pocket. Because since the 90’s I have fallen in love with clips. Clips are such a great way to avoid a pouch or a scabbard or anything used to say to the world: I carry a knife !! So the clip is mandatory for me. My last clipless knife has been slipping under my wallet and at the Airport it has been taken away from me. So no more clipless knife for me.

So, in the city, I need to follow the rules and I need a flat design clipped to a pocket’s lip. Again a thick Victorinox Swiss Champ is a no-no as is an rounded handle Opinel. Opinel are not for the city unless they are under N°8. And I want a slick design something easy in and easy out without telegraphing around I’m going to use it.
I love the Worker design from Sal Glesser , the very first clip it, which could be used without opening it completely the blade thanks to its false edge. Very clever.
In the city I want elegance. the object needs to be warm and tell a story. I’m not a predator, I carry a tool not a weapon. For the records, hammer, screwdrivers are much more lethal than any Perrin Lagriffe destined to wound and not kill. I like to be able to cut my food without using the dull silverware of restaurants. Because there is some places which are not fast food too. And even at the Macdonalds, using a sharp knife can help to share in two portions a single burger. But in restaurants nowadays it’s not common to find good steak knives. I always enjoyed bringing my own knife like my grandfather used to and that manner that my father hated so much. My father was carrying a switchblade for SD and then a La Griffe. He also used a small turtle shell slipjoint folder made in Nogent in his bag. The exact opposite of my way. Strange how generations go counter clockwise just to complete a full circle thinking they are re-inventing the wheel.

A knife, may it be a slipjoint of a locking folder, is a door for adventures. I often walk on the avenue of the Opera remembering Ernest Hemingway.
“He was a customer of the house Kindal, 33 avenue de l’Opéra, he used to go through the shop, after his purchases, to the Ritz, Place Vendôme. His Parisian triangle was the Harris Bar, Kindal then the bar of the Hotel Ritz. His deer stag handle locking folder, with blade, saw, bottle opener and corkscrew, was his daily companion, he even packed his tobacco and curated his pipe with it. The stag’s wood cracked at the end with time and the tobacco was constantly caught in the cracks, obliging him to clean his knife regularly, he had the idea to place an ivory knob, coming from one of his African hunts probably.
Many years after his death, Mrs. May Kindal, found Hemingway’s knife at the bottom of a drawer, left there for maintenance.
She had him reborn by Jacques Mongin, knifemaker and Meilleur Ouvrier de France.
Since then, the Hemingway knife is sold exclusively by the Kindal cutlery.” Translated from Kindal.

I remember the first time I have seen Ray Mears on the TV. He was walking in the beautiful English countryside and he used one of his elegant Woodlore fixed blade to cut some plant and give some stories. Wait a minute, this guy is walking in the UK and carries a fixed blade in his pocket. But as a black belt in Judo he won’t go in trouble with bushcraft knife anyway.

In the city, knives are making conversations. So it will leave your hands for those of a friend who want to see it. And you will be sitting in the sun drinking a cappucino. So the knife needs to be beautiful and smooth and not aggressive in any way because it can be display in public like smartphones and cameras.

I also need the knife to be out of the way, because I carry stuffs in my pockets or I got a messenger back and it happen sometimes: the knife get hooked to something and falls. So the clip and the way to carry it needs to be secure.
It needs to be very sharp also. And stays sharp. Because I’m not going to show my honing and sharpening skills in the street and a dull edge is dangerous for your finger. So, a good geometry and a good steel. A knife thought to be used not only to be displayed.

So here are some examples.

The Delica in its Knifecenter Special Edition is my actual companion. This one is so sharp it goes beyond my scale. HAP40 can be thinly honed, it’s a true razor. More can be found on it following that link:

In the very highest performances you also got Pekka Tuominen little Wonder Nilakka. You can click on its link. Again a little big knife with performance and ergos which change the game of current gentlemen folders.

The Michael Walker is a rare Gem and this Sprint run has proven how excellent it was as a skinner for very serious hunters.

In the Slip It territory the Urban is the perfect companion unless one hand operation is forbidden by the law. The steel of this one just does wonder and I’m thinking a lot about testing the new Police Model…

One of my old little city companion has been that little Tim Wegner Mouse II knife.

Spyderco has covered all the ground about small knives to carry by men or women. The Dragonfly is one of their pure example of acceptable locking Clip It.

My friends Xavier Conil and Laurent Monnier propose an elegant not threatening folder: le Pointu.

This knife got no clip and is not one hand opening but I have bought it in South Africa at the Good Hope Cape’s shop. This is my Southern souvenir. It has no vertical play and got a story to tell.

respecting the Danish law, the Pingo is one of the solutions for having a clipped knife with no opening hole.  The hole here is only a trademark.
There is a Sprint run with Elmax blade and Titanium handle, I often look with envious eyes…

This one is French, it’s JD’s folder a Sacha Thiel which will be reviewed soon. The blade can be open with a gentle flick helped by the thumb and the deep pocket clip makes it disappears.

So here my knives for the city. My Griptilians are too tactical. My small Sebenza has been lost. I could dig my drawers for more but I think you were able to catch my drift.
Here is a following up about choosing a 3 inches folder.

Team Cuscadi new Carbon Fibers Scale on K390 Urban.

Why the change ?

After my Urban review I wanted a smoother experience. And give a more precious apparence.
Carbon fiber is a really sturdy material and twenty years ago you could only find it in Formula One and jetfighters.
The feel under the thimb is wonderful and the knife get clipped with ease.

Great work from Team Cuscadi and great service.

Team Cuscadi Scales on Urban K390

Spyderco C127PGY Urban K390 – Lil’Grey Alien armed with Hyper Steel.

20170227_003137_zpscvv2wsax

Mostly knives company gives the best steel to there flagship models but again Spyderco create the surprise in bringing a 1200 pieces sprintrun of their lightweight Urban slipjoint folder with the best of the best of the cold tool steel: the Austrian Swedish-made Bohler K390.

The steel is a third generation powder steel and to quote them:
“Just as mountaineers need the best equipment to conquer the highest peaks, it‘s essential to use the best materials for your tooling to ensure trouble-free production and achieve outstanding tool life. Three reasons why BÖHLER K390 MICROCLEAN is highly cost effective: Extremely high wear resistance, excellent toughness and very high compressive strength. The high-performance powder-metallurgy steel BÖHLER K390 MICROCLEAN is a reliable solution for your difficult cutting, die-cutting and cold forming operations, and it has a very good track record for applications in the plastics industry.”


Phil Wilson has been using it and he’s known for getting the best of super steels.
“I have been using K390 from the start ever since it was introduced by Bohler and I got some small samples to try. A bit of history is that it is the European version of CPM 10V but not the exact chemistry (about 1% less V plus small addition of a few others). That is because the CPM 10V chemistry was protected by patent at the time. If you check the K390 data sheet it claims that the bit less V gives K 390 a little boost in impact toughness. It also can be heat treated at a lower temp. than 10v. So it is pretty much the same as the A11 grade but different in a few small details. It is hard to tell the difference between CPM 10v and BU K390 in the real world in my experience. I like both grades and they are the base line (along with Vanadius 10 and K294) from which I measure wear resistance. The 5 chrome is there to make them all air hardening among other things and does not contribute much to corrosion resistance. It is going to make a killer knife in the new offering and be another classic. Phil”  On the Spyderco forums.

So one of the best steel is available on a slipjoint the C127.
It’s almost the same cockpit as the Squeak, the blade is a tad under three inches with a full flat ground blade. The backspace is in stainless steel and is used as main spring and the handle are FRN: fiber reinforced nylon. A generous choil gives you security as the blade cannot close on your finger. It’s the same idea as on the C36 Military you hold the open folder by the blade so there is less stress on the pivot. The hump and the choil work as the quillons of a boot dagger. It means also you can give a lot of power into your cuts.

The C127 is modest. This is not the K2. The Urban is a gentleman knife legal in many places. If it was a car, it would not be a Landrover but a Mini.
But here the Mini is turned into a mini Cooper with a very powerful prepared engine as the steel is the chore of the knife.
Again steel is nothing without a good heat treating and without a great geometry adapted to the steel.
And my C127 arrived with a very thin edge. The Maniago naufacturer seems to be very good lately in the way it provide good edges to its blade. Like the Elmax Squeak I was able to cut through the bottle butts with ease and control. The knife cut precisely with not a great amount of force, this is always a pleasure to fill the thick center crossed without the rest of the bottle to collapse due to too much strenght.

Now K390 is not stainless and it suppose to develop a patina. This is good news as it will gives to the knife a lot of character by turning it full grey !

It’s not the first time that Spyderco equipped his FRN knives with the best exotic super duper steel. It was the case with CPM110V on the Blue Manix 2 FRN and the Blue Native FRN . K390 is going also on another flagship: it will equiped the 4th edition of the Police Model. I had the chance to handle it yesterday at the Minimeet and this is going to be a great big folder with a lot of cutting power (Full flat ground large blade) on a sturdy construction (I just regret the did not bring the Power Lock on the Police model, but this is just me…).

For my European fellow have found easily the knife for 77 euros shipping included.
You can use the search functions and do your math and have the chance to try K390 on a very low profile plateform.
I have since mounted Cuscadi Carbon Fibers on this little gem.