C127GPRD SPYDERCO URBAN HEINNIE® EDITION – The S90 Urban UK Legal Wonder.

The Spyderco Urban, Squeak, and UKPK family are the most addictive slipjoint lineups in the modern knife world. I have already written about them on this blog. The UKPK Salt is simply one of the best modern folders available nowadays. The Squeak is totally sheeple-friendly, and of course the Urban was made for city carry and can be carried almost everywhere except on airlines.

Spyderco’s description:
“This Exclusive version of the Spyderco Urban™ was manufactured specifically for Heinnie Haynes (heinnie.com) and is available only through their sales channels.  Originally introduced in 2009 and later discontinued, the Urban remains a cult classic among devoted fans of Spyderco’s non-locking, one-hand-opening, clip-carried SLIPIT™ knives. This distinctive expression of it showcases a leaf-shaped blade crafted from premium CPM® S90V® particle metallurgy stainless steel. The PlainEdge™ blade is full-flat ground for exceptional edge geometry and is proudly laser engraved with the Heinnie Haynes logo.Not to be outdone, the handle of this knife features distinctive red G-10 scales with a non-slip peel-ply texture. They complement the jimping (textured grooves) on the blade’s thumb ramp and index-finger choil to ensure a positive grip and outstanding control during use. A reversible deep-pocket wire clip provides a choice of left or right-side tip-up carry, making every aspect of the design completely ambidextrous.”

This red one is my third Urban. The first one was in K390, the second one was in AEB-L and was named Cappuccino. All of them were eventually pushed out of my pocket because of the greatness of the UKPK Salt in LC200N.
Still, they have all been great companions during my travels in the UK, as they are fully legal: non-locking knives with blades under 3 inches (76 mm)…
Eventually, I started looking for a G10 version with a full stainless steel backspacer, and I found the Heinnie Haynes exclusive version available on their site. It is not a cheap knife, be aware of that, but it oozes quality both on paper and in hand.

First things first, this Urban features a CPM S90V blade, the same steel found on the Proficient bushcraft knife. S90V was previously known as CPM420V, and it remains one of Sal Glesser’s favorite steels ever produced by Crucible.

S90V is famous for its incredible edge retention, and after 25 years of using it, I can tell you that it can also be a bear to resharpen. Diamonds are its best friends, and even then it requires a lot of white ceramic work and stropping… Compared to non-stainless super steels like Maxamet, it can be quite tedious to bring back to a truly razor-sharp edge. But once sharp, its working edge seems to last forever.
This is exactly the opposite of my previous experience with Cappuccino, my AEB-L Urban. That knife was tough and incredibly easy to keep razor sharp, but it quickly lost its edge when used on abrasive materials like cardboard.
S90V eats brown cardboard for breakfast and stays sharp for a very long time, but it takes patience to bring it back to a crisp razor edge.
That is excellent when you need a long-lasting working knife on a trip where you did not plan to bring sharpening equipment. Sal Glesser trusts S90V enough to use that alloy on many of his own special Sprint Runs with carbon fiber handles.
I have never been disappointed by S90V. Even on fixed blades or on the Manly folders, it has always been a game changer in terms of long-lasting sharpness, and in my experience it even surpasses CPM 10V.
S90V is also highly stainless. Unless you plan to use your knife in the ocean, it can handle demanding work in the forest without needing immediate cleaning.
It has also been noticed that this S90V Urban features a slightly thinner blade: 0.23 cm instead of 0.29 cm. The blade is also slightly shorter than previous Urbans, although I have not noticed any difference in real-world utility.

This Urban was made in Italy, and in my personal experience, Maniago craftsmanship has never been a disappointment. Your mileage may vary, but this has been mine. I have always been happy with my Spytalians!

G10 is not a common material on Urbans, as FRN dominates the lineup, and the texture of this G10 is even more distinctive. At first, I considered turning this knife into a smooth “pebble,” but… nah! It is great as it is.
I only adjusted the feel slightly by sanding it, but overall this is a beautifully made, high-quality handle — once again, kudos to Maniago.
All Heinnie Haynes exclusives feature this red treatment on the handle; it is their signature. The G10 version also benefits from a longer steel backspacer that closes the handle construction more completely.

Now about the action: this Urban has the strongest spring of all my slipjoints! That is actually a very positive point. I can still open it with a quick wrist movement, but closing it requires real force, which is rather rare — even in Spyderco production. (The first UKPKs were “chewing gum soft,” to quote Guillaume, moderator of the Spyderco Fan Club.)
A strong spring combined with the absence of a lock makes it a great candidate for legal everyday carry nowadays.

Now regarding geometry, Maniago deserves another round of kudos! As you can see in the picture above, I was able to split a bottle bottom in a single pass with the factory edge. That is also rare! Even my beloved Hellboy needed some thinning before reaching that level. This is thin geometry straight out of the box!
The short drop-point blade makes it an excellent whittler, and Spyderco truly knows how to make little big knives. The hump and choil transmit your cutting force directly into the blade, sparing the handle, pivot, and mechanism. It is a clever design, inspired by the old San Francisco gambler’s knives. Sal’s first implementation of this “cockpit” concept dates back more than 30 years to the C36 Military.
The choil-and-hump combination is brilliant for preventing a non-locking blade from closing onto your fingers. To me, it is an absolute must-have!

So here we have a legal folder with a non-threatening blade, a strong non-locking spring, excellent cutting geometry, and stellar particle metallurgy steel.
What is there not to love about this wonderful Urban?

You can cut a pizza on your plate and use it as a steak knife without raising any eyebrows. I use my knives directly on plates, and I know how to avoid dulling them on ceramic. My mother-in-law never places a knife near my plate anymore — that is how I can spot where I am supposed to sit at her table.

The Urban also has the perfect size for carrying in a Levi’s 501 watch pocket, and as you can see, mine has been shredded over time by many aggressive G10 handles before extensive sanding.

So yes, I highly recommend this excellent exclusive little knife. Again, it is not cheap, but the quality is there from tip to clip.

Spyderco Native Chief: HELLBOY 2 – The Kitchen Army

Since the reception of my Chief Native I have found that he was a sole survivor from a Xmas Mystery Box bought in Spyderco’s plant in Golden in December.
In that box were different items and a rare Sprint Run Second Factory which was destined to end in my pocket and considered by myself IMHO as the perfect realisation of Sal and Eric ideas about pocket knives. In fact I think it is my favorite Spyderco ever.
I have written a first review here.
And now it is time for a second approach of Hellboy which has succeeded in kicking other knives from my pocket and quench my thirst for novelty.

So why ?

First the Native family feature an absence of hump on the blade making them very slick and beautiful.

Even the Shaman benefits from that.

The Chief is on the left and the Shaman on the right.

As you can notice the design of the Native Chief is really close to one of my favorite design: the AFCK.
Sal Glesser was no stranger in the Benchmade BM800 AFCK back in the 90’s. He helped Les De Asis founder of Benchmade on it. They had both learned how to make Michael Walker’s linerlocks at Bob Terzuola shop.
Both company were accelerating on the tactical lane in close formation.

As you can notice, my AFCKs (Advanced Folding Combat Knife) which was also designed by Chris Caracci a former Navy SEaL have been used a lot. The first version got a Spydiehole and the second version got an oval hole and an axislock.
This design was one of my favorite for a big folding knife as EDC.
And back then I was really in love with concept of tool highspeed steel on a modern plateform.

The same happend with that special Native Chief which got a very special alloy for its blade: CPM-4V.
With that steel, the edge is strong and the thin blade is very solid.
It gives a lot of confidence when cutting on a plate made of ceramic of glass. No chipping can happen.
Hellboy has been used a lot for cutting pies and cake on glass plates and the edge behavior was not disappointing. When I have noticed a little shiny spot, some white ceramic was able to put everything back on line but it was really minor.

Now CPM4V is not stainless. It will form a patina or, worst, rust very quick and easily when used in acidic matters like cutting lemons and being used on a salad with vinegar.
DLC coating is really welcome for that kind of behavior. Back in the 90’s Benchmade was offering only PVD coating which is really inferior to Diamond Like Coating. So far the blade of my Chief is not marked and scar by it various cutting tasks even when cutting.
My previous Chief was a naked Rex45 blade and it was another story told here.

Even strawberries can darken the edge of CPM 4V.

But cheese is a great way to notice how DLC is making the surface of the blade less sticky but more stinky.

The Chief was not always used on gentle medium like wood.

It was also used on plate with vinegar salsa. Here it is basamic vinegar from Modena.

In the kitchen the knife is really behaving like an paring knife. It is really handy on fruits and vegetables. Its very pointy blade is great to carve.
.The mechanism has never suffered from being wet and rinsed under water. The knife was smooth through and through its various wet works.

Now I like to have chamfered and smooth handles and blade spine. The Chief is known to be very square everywhere. The G10 has been easy to smooth with sandpaper used wet to avoid toxical dust.
Now the blade spine is DLC coated and it was my esthetic choice to remove the coating on all the length of its spine.

I love the result.

It has been done with some diamond rods.
Now the spine is much more confortable for my thumb in case of push cuts.

CPM 4V on that Native Chief platform is really the bread and butter for a strong thin folder. I’m not afraid to use hard on wood and plastic.
And it is a must in the kitchen various missions.
It has been also test on different hard wood and compared (geometry speaking) with many other knives I got.
One of my champion is the Swayback in term of smooth pushcuts.
But also the Wolfspyder and the Yojimbo.

My Chief needed more convexing and thinning to go to the level I was expecting. Again diamonds has been used handfree to remove the shoulder of the edge.
CPM 4V keeps a very very crispy edge and bites in the wood very aggressively.

CPM M4 is a stunning alloy which is prefered on fixed blade but it is a gem on a long and thin folder. It makes it super solid with a very permissive edge.

Quoting Larrin Thomas Phd:

Some will argue that toughness is not important in folders or fine slicing knives and feel that only edge retention matters in that case because they don’t use their knives in aggressive ways which are likely to lead to chipping. However, broken tips are still common on small knives and kitchen knives. And with higher toughness, the knives are better able to handle thin, low angle edges without chipping. And they can be heat treated to higher hardness to help prevent edge rolling and deformation, while still maintaining good toughness. This means that, indirectly, higher toughness can lead to better cutting performance because of the possibility of thinner edges.

The good news is that CPM Magnacut has been copied on CPM 4V behavior.