Tag Archives: Pekka Tuominen

PEKKA TUOMINEN IRON WOOD PUUKKO – A glimpse at the Northern Woodlord.

Pekka Tuominen Spyderco Puukko

Pekka Tuominen Spyderco Puukko

Pekka Tuominen Spyderco Puukko

Pekka Tuominen Spyderco Puukko

As you can notice the blade of the Puukko is not tapered like the Nilakka. It’s a real different animal to work with.
More strength to the tip for example.Even if I had never got any issue with the folding version which is one of my sharpest (if not the sharpest) of all my knives. The Puukko is in the same category in term of push cutting.
Also you can notice how its cousin, the Urban Hunting Knife II looks huge compare to that lil’ Northern Woodlord. Again Pekka’s Puukko is destined to be sheeple friendly. For the Finnish, this blade lenght is more than enough.
It’s a gentleman bushcrafter and it screams to be used ! And Spyderco S30V bring a very stable edge in my own experience.
I’m planning to keep that Puukko in a zero edge (when I had gently convexed my Nilakka…) and I will be confronted at one moment to the water stone. More to come soon !!:-)

Slysz Bowie versus Nilakka – Push Cutting Contest

Slysz versure Nilakka

One my favorite test for my blades is cutting through a plastic bottle bottom. It’s not as easy at it seems as the thicker part (at its center) is surrounded by a ring of softer plastic which can collaps and get crushed before the edge bites and cut through the center.
So of course the sexy Slysz was put into that testing and was able to cross the bottom but it was not better than the Nilakka which was able to do with more ease.
Why ?

After one year of constant use, I have slightly convexed my zero ground Nilakka and for ten months this folder has never warped or chipped its edge. It’s my sharpest knife with my BRKT Canadian Special in CPM3V. Also the thick spin and thick handle help for transmitting strength into push cuts.
So the gorgeous and thin Slysz is not as confortable for push cuts even with its rounded blade spin and concave titanium handle. Also its excellent factory thin edge is no match for the Nilakka’s.
I will do the test again after some gentle convexing of the Slysz Bowie and then we will see if the Nilakka loses his throne.

Slysz and Nilakka

Spyderco Amsterdam Minimeet the 10th Anniversary Report

Amsterdam Minimeet 2014

This review will be update on regular basis as we are also dependent from Spydercollector pictures.

Nemo: Again we have been 80 lucky people to attend the 10th Anniversary Spyderco Meet in Amsterdam.
Some were there since the beginning like my friend JD and this post will be both impressions.
Here the list of knives and our impression.
For the model pictures you can visit Spydercollector excellent blog here as he got the exclusivity:
http://spydercollector.wordpress.com/page/2/

Sal Glesser

29 concepts and prototype are a lot in a single session. They are a lot and a lot of ideas in non locking knives, bushcrafting, SD tools, long forgotten designs and performances researches but… without showing any pics it’s a little pointless to talk about them here.

JD and Sal

Eric and Sal have harvested our impressions, sucking up feedbacks from 80 feverish minds.
For example JD gives the important hint that Walter Brent trademark was mirror finish blade on his Mamba Concept Model.
JD: Polished deep hollows, thats Walter Brend!
Nemo: And Eric will now see what would be the best steel for respecting that particular signature.

This is where the Minimeet shows how important exchanges are ! Eric and Sal are here to listen to the “hot” feedbacks and they take very good notes of each of them. It’s quite obvious after to notice the changes in a final product. (We got some very passionate exchanges three years ago with Sal about a huge folder featuring an “über” strong lock which could be used as a tough folding camping tool for example…)

Also the Minimeet is the chance now to see designers and knifemakers coming in Amsterdam to present their prototypes.
Like Ulrich “Uli” Hennicke:
Uli new proto

or
Filip De Leeuw:
Filip De Leeuw

So let’s browse the memory of some models we liked:

Slisz Bowie Marcin Slysz Prototype
JD: Impressive! Ergonomic, solid, slicy.
Nemo: This one is my favorite so far in this 10th Anniversary. A sexy shape, a ergonomic titanium handle. This could be a Sebenza Killer with a bowie blade and full flat ground blade. It should be release for mid 2014. So we will have to review it in september.
(I will like pictures from Wouter site as soon as he will have them on line.)

His ‘father’ could be the K2 by Farid Mehr.
JD: Pocked machete!
Nemo: but again if it’s going to be produced in CPM10V this huge Sebenza / Bowie like knife is going to be a must have.
Farid is known for his Heavy Metal knives. He was making RIL locks in stainless steel on thick blades !! The K2 has been refined by Eric and Sal a lot before to born. Now it’s a big folder but with a slick appearance. It’s big but it’s a very useful shape. You can easily see how to cut a whole chicken or a pinapple with it. This knife is also very easy to clean.
Fortunatly we got a link to the pictures here:
http://spydercollector.wordpress.com/2014/03/04/spyderco-2014-production-prototype-farid-mehr-k2/

The Native 5 Lightweight production sample
JD: Favorite Native so far !
Yes it’s light and it’s solid a s a rock. Sal loves it. This is a knife destined to be a classic.
It’s a Native 5 with FRN handle but the feel in your hand is balanced. A great tool to clip. The plastic handle is square and smooth. I really liked it.

ARK Sam Owens design production prototype
Nemo: This little FB is destined to be a self defense tool to prevent rapes under the shower in the Army… Go figure how people are crazy nowadays. What can I say ? Of course it will be rust resistant as it will made in H1. I would have preferred a Fred Perrin La Griffe as even with soap in my hands I would not have lost my grip. Anyway, fighting naked with a blade in the shower seems like a nightmare…
They should invest in video camera instead. The blade shape is like a Sharpfinger which is a very nice utility and skinning edge. For SD I would have prefer a serrated edge for a maximum of pain without to inflict lethal wounds. Anyway a razor sharp neck knife for shower does not seem like a good idea to me anyway. I’m much more for the use of psionic blasts…
picture and description here

Battlestation Alex Diaconescu production sample.
JD: Much of the jimping has been removed after feedback. Nice handle but this is not a thin slicer.
Nemo: Th grip once open is very secure. It’s a very solid feel. again it looks like a weapon oriented project. Would look great in a movie. It’s a “dramatic” design for Snake Plissken to escape from a battle station.
Picture and description here:
http://spydercollector.wordpress.com/2014/03/03/spyderco-2014-production-sample-alex-diaconescu-battlestation/

Bradley Folder 2 Gayle Bradley design Concept model.
We had the chance to tot two BG folders. One with a bolster and the other one without it.
JD: Both very nice, but the bolstered one is nicest. Most comfortable in the hand and prettiest!
Nemo: Yes, but the bolster does not leave any access to the pivot screw… Beautiful knives. No finger choil, very sexy lines. Like a stretched and lighter Gayle Bradley previous hardcore folder.

Chubby Michael Burch design Production Prototype
A lot of belly and a false edge for nice looking little big knife. But I did not get any vibes from this one… I did not like the clip at all as it is ready to scratch the car’s paint.
Pictures are here:
http://spydercollector.wordpress.com/2014/03/03/spyderco-2014-production-prototype-michael-burch-chubby/

Condor Jot Singh Khalsa design CM
JD: Interesting look, awkward and uncomfortable in the hand.
Nemo: Yes, there is pig tail to the handle for the pinky to rest. But like you I was not convinced. They are a lot of curves in this knife but I was not able to find it confortable to hold too.

Dice Eric Glesser Design PP
JD: The Dice is Nice. Fits me even better than the Domino.
Nemo: The opposite to me. I miss the blade of the Domino which is the minimal length for me.
Pictures:
http://spydercollector.wordpress.com/2014/03/03/spyderco-2014-production-prototype-dice/

Dog Tag Folder Serge Pancheko PP
Nemo: this one going to be a success as it is so cute. It could be a anti rape self defense tool too as this small folder can be a latch ditch weapon for naked fights.
Pictures:
http://spydercollector.wordpress.com/2014/03/03/spyderco-2014-production-prototype-serge-panchenko-dog-tag-folder/

*******Edition of the 10th of marc 2014. Further reading will be even more chaotic than the previous one. 🙂

Foundry Spyderco design PS
JD: Comfortable and useful design. Bit heavy.
Nemo: and it will be rare as the Carpenter workers will have it in priority. Eric told us it took him one year to design it as he wanted to design a simple knife for blue collars. This is a knife which can be used for eating, the kitchen and for hunting. This is the kind of knife my grandfather would have love.

Frontier Ed Schemp design PP
JD: Nice thin grind!
Nemo: I usually a big fan of Ed Schempp design but here the S guard is getting in my thumb’s way. I like to give pressure on the back of the blade with my thumb (that’s why I do not like vertical play also).

Mini Nilakka Pekka Tuominen design CM
JD: Interesting. Clip needs to move to the back of the handle.
Nemo: The clip was not as clever as the Nilakka folder. A very impressive little knife.

Grievous Dave Gagne design CM
JD: Do not understand what it is for.

Introvert Chris Knutson CM
JD: Interesting look, fun to flip, rings get in the way of use.
Nemo: another folding Lagriffe. Good thing is that Spyderco is always giving credits to the original designer.

Ion Brad Southard design
JD: Pretty and smooth. Liked the inlayed lock the best. Gentac knives.

Joule Michael Reinhold design
JD: Functional design if the handle is rounded. It has to many shar points now.

Kingyo Liong Mah design
Kiwi 4 G10 Prototype
Lady Finger Ed Schempp design
Lil’ LionSpy Gianni Pauletta design Proto
JD: Nice but thick.

Liong Mah Liong Mah design CM
JD: Nicest and most practical of the two Liong Mah designs.

Manix 2 LTWT 110V
Mike Draper design PS
JD: Big but comfortable and useful design.

Myrtle Filip De Leeuw design CM
Native 5 Fluted CF Proto

One-Eyed Jack A.T. Barr design
Opus 14 Ulrich Hennicke design CM
JD: Anonimus, would like to de a DE/UK legal design from him.

Ouroboros Paul Alexander design
JD: strange ergonomics.

Para Military 2 Composite – Sprint Sample
Para Military 2 Fluted CF – CM
JD: Most comfortable PM2 ever!

Parata Paul Alexander design
JD: strange ergonomics.

PIP Jamie Bailey design CM
JD: End of handle too pointy, fun little knife

PITS Mike Read design Proto
JD: Comfortable, practical & elegant. Most upscale UK legal production folder.

Retract Ed Schempp design CM
Roadie Spyderco design
JD: Cute! Sharpen flat on the stone to make a pocket scalpel

ROC Serge Panchenko design proto
Rockhopper Michael Reinhold design CM
Spydi hole hard to reach.

Roto Wedge Spyderco design CM
Rubicon Peter Carey design Proto
JD: Pretty! But clip is digging uncomfortable in the hand.

Shaman Spyderco design CM
Six Blade Tool CM
JD: Pointy holes.

Southard Folder (all black)
Spin Blue Nishijin
Splitter. Spyderco design CM
JD: Solid, ATR 2.0

SpydieChef Marcin Slysz design CM
JD: Impressive! Beautiful and practical.

Spy-DK Prod sample
JD: Nice thin edge! I could open it with one hand, but not easily.

Stop Lock CM
Swede Michael Henningson CM
JD: Nice look, lanyard hole very sharp and pointy.

Szabo Higo Laci Szabo dsign CM
JD: Needs to be found thinner, more like the knife it is based on. Other than that nice modernization of and classic.

Three Blade rescue CM
JD: Small holes have pointy tops.

Texture tech CM
ULU CM
Ulize M Ulrich Hennicke design
JD: Very Spyderco jet different. More carriable size.

Valloton Sub-Hilt 3.5 Butch Vallotton design CM
Victory Jot Singh Khalsa design
JD: Interesting look, awkward and uncomfortable in the hand.

Worker G-10
JD: Comfortable handle. Will probably be sold out very quickly.

Genzow Hatchet Martin Genzow design CM
Lum tanto Sprint
Ronin 2 Michael Janich Proto
Packer Gayle Bradley design
JD: Excellence!
Nemo: I was very impressed by the balance and the heft of that “Tomahaxe” 😉
Beautiful lines and great handling. I would love to test it as soon as it is released. I think this gorgeous hatchet has made a great impression !

The Dutchman tom Zoomer design CM
B & T Phil Wilson design CM
JD: Slicey
Nemo: But the “cobrahood” guard wich will go in the way when power cutting and batonning.

Whale Blade H1 w/handle Spyderco design.
JD: For the GI’s

Eric Jur and Sal

SPYDERCO NILAKKA ~ C164GBN – Round 2 – Hard Use Folding Puukko

I could not imagine that a knife with a 4.5mm thick stock blade could be considered as some kind of safe queen ever. A delicate collection folder destined to open letters (and clean nails). The Nilakka is from Pekka Tuominen for God’s sake. He is a exmilitary, a countryman, a masterbladesmith and a gifted knifemaker who is also genuinely “tool oriented” (even if he also loves precision and is “attention to details” driven). So. No safe queen. Let’s use his Nilakka like it deserves it: hard. Everyday. In all conditions. And it has to be successful ! I’m a grandson of a farmer which used to clean his knife on his trousers, drink like a hole, spit on the ground, and fart loudly to make his point. I will use the Nilakka like he would have use it.

But before, I needed to change some details to have that gorgeous folder fitting my personal tastes. First thing to be tuned was the clip. This a great deep pocket clip but this one was going to eat my pants pocket faster than a porcupine in love. Also, it was so tight, the Nilakka was not a fast drawing tool at all. Easy peezy lemon squeezy, some sanding with sandpaper (600 grit) and the handle is now soften as a hedgehog neck. And also, the Nilakka is much easy to pocket (in and out). I need to have my tools out of the way as fast as I need them to be drawn.
Second important personal tuning: the back of the blade is just too sharp for my delicate thumb. It would be a blister magnet to keep it with all those sharp angles that way. Again, some elbow grease and some sandpaper were able to fix that and… now my thumb can push the blade with confidence. this is important for power and control of my cuts.

Like I had noticed it, My C164GBM is from the second generation Nilakka: it is not a zero ground blade. There is a tiny tiny bevel.
Anyway, that knife does pushcuts into hard wood with an ease which is simply unreal! The Nilakka is by far one of the best wood cutters in my collection if not the best. Even my CPM Cruewear Military with its now impoved with a thin convexed edge is not a match for the S30V blade of the C164GBN. Into wood, the Nilakka goes deep, steady and makes big chunks of wood. It’s so easy. It’s so fun ! It’s so reliable on the long run.

Oh, I’m so disappointed: I was not able to have my edge ruined !! I was expecting to have some damages by cutting bambu, hard plastic and bones… Nothing. I was able to dull it and I have also able to use ceramic and leather stropping to maintain the edge on a very keen level. In 2 minutes, S30V (which is not my favorite steel after using CPM M4, CPM3V…) is back to high level of sharpness and more stropping can make it a true razor able to whittle some hairs.

The handle is strange, isn’t it ? Diamond shape. But once you know how to palm it it is very comfortable to use despite all its sharp corners. And yes I have grind the corner with sand paper too. Why it’s so confortable in use ? It’s certainly because the handle is fat and in “3D”. This a particular shape you can find on Finnish fixed blades (Tapio Wirkkala’s design and Sisu’s version of Cold Steel named the Finn Bear, it’s the same diamond shape handle…). It’s very effective even when my hands are wet. If I need to stab anything I will rest the handle’s butt in my palm. (Sanded sharp corners…) Anyway, such a thin edge doesn’t need too much force to cut deep in any hard materials. I even cut into aluminium cans. I wanted to see how S30V would behave if I was using it like a CPM Cruewear blade. Spyderco excellent heat treatment and micro bevel is the key of success. The Nilakka’s edge is now reliable.

So far so good. We still got a thin point blade which makes look the Military as a crowbar. After drilling some holes in chestnut wood, I have lost half a millimeter of that thin needle pointy point. In fact, I had noticed it after drilling a dozen of holes, twisting the blade again and again… No big deal, there is still enough point sharpness to pop any balloon around. I had the same with my Spyderco Ronin, Dodo and Yojimbo and it was not a big deal. It’s relatively easy to regrind by hand and the new point is much more sturdy.

The kitchen is my main battlefield. You need to be able to process, flesh, bones, tomatoes,plastic bottles, cardboards, cling but also aluminium. Again as thin as it is, I was not able to damage the Nilakka edge. OK, I did not try to hammer the Nilakka through a concrete block just for the sake of breaking it. This would be (pardon the pun) pointless. But this is not a safe queen !
And I had used my folding puukko like my grandfather or my father in law would have use it.

Now, the Coke bottles are one of my favorite test and many famous knives were not able to cut through the hard plastic bottom center. This is the thicker part of the plastic. Try that on your favorite knives and you will be surprised. Try to cut right in the middle of the butt. Here, the Nilakka was able of miracles. The same kind of powerful push cuts a sharp Opinel can provide. You know, thin ground blade Opinel are really kings in pushcutting hard materials. Try any of them on plastic and you will be really surprised. The Nilakka is in the same league. It is even better than Urban II, the Hunting knife from Pekka Tuominen I carry in my bag. This is something that many “tactical” knives makers are forgetting. (Mad Dog knives or Striders are not the sharpest tools for that…)
I was really surprise in how the S30V thin edge behaved on the long run. No more chipping, no bending, no more damage (but the point). I was really impressed.

Through all the holidays, the C164 has been rinse after use but not oiled (I use Nano Oil than I get from Isidore in Armes Bastille) and the Nilakka is as smooth as the first day. The lock has not moved. I was not able to have lock failure. The knife is easy to clean and shows no rust despite its use for cutting lemon without real cleaning.
The absence of guard on that design is not an issue if you know how to adapt and how to use a knife. There is plenty of ways to choke up the blade for delicate work and the absence of the usual Spyderco choil did not bother me at all.

Something, I have noticed and that I love about that blade’s shape: it starts like a sharp wedge and ends like a needle. This is unique and radical in design. And you can find many use to it. The penetration power is tremendous and the slashing power at the top of my records.
I was not even able to notice any wears or scratches on the metal spacer.
So it has kicked my Millie from my pocket. And I will continue to EDC the Nilakka for the coming months until it fails me. Which is not certain.
I’m really surprised in how the mechanism is reliable and easy to rinse but most of all the keen blade is a pleasure to use and put all my other knives under a new perspective.
For example my Gayle Bradley seems like much duller knife compared to the easy deep cuts provided by the Nilakka geometry.
Also Pekka’s design is so unique and beautiful, open and closed… it’s really “sheeple friendly”.
So the test will be continued in round 3.

Nilakka Nemo Sandman

Nilakka Nemo Sandman
Stropping the blade is the best way to keep it to razor sharp level. It’s easy and quick.

O
One of the most beautiful back in the folding knives industry. A steel spacer, a thick blade and a thin point. Unique !
Edit August 2017: Since then a Lil Nilakka has born !

SPYDERCO NILAKKA ~ C164GBN – Pekka’s Folding Puukko is a North Star !

Pekka Tuominen Nilakka

I have had the chance to meet Pekka Tuominen two years ago at the SICAC (Paris Knifeshow) but six month before I was handling a prototype of his Folding Puukko at the Amsterdam Minimeet.
The design was very ZEN. For me it was like a Japanese hidden blade in a bambu handle. I was also impressed by the smoothness, the thickness and the profile of the blade.

For me, it was an object for collector. A tour de force, including the famous hidden stop pin.
Also the final choice of choosing S30V for a zero ground blade was really disturbing. I was hoping CPM3V or CPMM4 or even O1. But my experience with S30V has never been extraordinary.
Frankly S30V is not a steel which gave me good results even with the knives of the people who introduced that steel in the first place… I prefer VG10 for exemple which is not a powder steel but at least a reliable edge on thin grinds.

Anyway a folding Puukko in S30V was like a bushcraft knife in S30V. Why not. But I was not very excited by that choice…
Then I heard and read on Cliff Stamps forum how the burned edge was rolling. I was not surprised as S30V would have not been my steel of choice. Now perhaps the thickness of the stock available was the reason it was chosen ?
It was a shame as everything in Pekka design was oozing quality and his quest for excellence. It is also a very very clever mechanism. He is a perfectionnist. I remeber how he was inspecting the prototype of his Spyderco (not folding) Puukko’s sheath. He wanted everything to be perfect. And he knows his business about Puukkos.

I had experience with thin stainless grind blade rolling on very pricey folders too. My Rockstead was an example and since I have been able to hone a secondary bevel and the de-stress the edge for excellent results.
Then I got the honor to receive a gift from Pekka: his Nilakka, second generation.
I immediately tested on hard bambu and the edge did not suffered.
There is a micro bevel which now strengthen the edge. So there is no reason not to use it hard.
Again, the folder is smooth like Normandy butter. The heel of the blade is very thick when the blade point is thin like a needle. You find yourself contemplating, trying to understand how the tappered design works. The large gap between the liners on the back of the handle is not an issue when you know how to switch your grip (like I did on my Lionspy) to avoid hurting your palm during cuts on hard materials.
What I love in the Nilakka is how original, practical and radical the design is. Closed it is wonderful to handle and manipulate. It’s an absolutely non threatening design. The gentle curve of the handle give a very natural look to the package. Open, it’s real Puukko. There is no hint, no axis, showing this is a folder. (The axis screw is hidden under the G10 slabs!)
It is a pleasure to take on hike and use in the forest. The open design makes it easy to clean by blowing air and rinsing it. The choice of a stainless steel blade gives confidence to mechanism maintenance. There is no reason not to EDC and use that knife in the wild like it was designed. It is not a safe queen curiosity anymore. (A first generation after some work on the edge would have been the same anyway.)

Looking at Pekka official site and it’s easy to find other eye candy !
His blog: http://www.puukkopekka.com/ is a feast for the eyes !!!
Living in Finnish countryside, Pekka is a colossus with a great sens of humour. You can feel in every details of his Art that he has blown passion, intelligence and a special pinch of that natural cleverness from farmers and pragmatism of soldiers. His knives need to be reliable and beautiful. Also he needs to have fun while making them. From the design, to the forge, to the heat treatment, to the choice of materials, to the different type of sheath, Pekka does everything !

So eventually the Nilakka in its second incarnation is a very unique and practical EDC. It is also a great conversation starter because this folding Puukko is a great ambassador to modern and traditional cutlery. Mine is going to be used on a EDC basis and I will complete that review later.