Tag Archives: Tusk

Back to the Tusk!

Before the Spydiechef, the Tusk has been the first Spyderco with LC200N blade.
This one needs to get back to sharp after being used by Pascal since his first review.

From Spyderco:
“The original concept of the Tusk was conceived by Sal Glesser in the early 1980’s. More than 25 years later, his son Eric picked up the project and made it a reality, creating a truly extraordinary multi-function mariner’s tool. The Tusk’s handle is precision machined from two slabs of solid titanium. One end houses a Plain Edged blade ground from LC 200 N steel—a nitrogen-alloyed tool steel that offers extreme toughness and superior corrosion resistance—and locks open via a sturdy Reeve Integral Lock (R.I.L.) mechanism.

At the other end of the Tusk’s handle is a 300-series stainless steel marlinspike, which features a unique round-to-square cross section for increased leverage when loosening knots. A milled slot in the marlinspike’s body and the gap between it and the handle also serve as shackle keys for unscrewing and tightening threaded shackles. To allow the marlinspike and its shackle key to withstand extreme leverage during use, it locks securely in place with Spyderco’s patented Ball Bearing Lock™ mechanism containing a special ceramic ball. Constructed entirely of highly rust-resistant, state-of-the-art materials, the Tusk literally began as a tool that was ahead of its time, but whose time has now come.”
This is something of a “heritage” knife for Spyderco (i.e., the father’s idea, and the son’s design)…

The blade’s saber grind is not on the thin side but it can get a little better with diamonds. The Tusk is like a Ferrari hence its high price. I do believe it was also some tests for the Taichung factory. Some kind of high prized yachtman tool.

On the Amazon.com dumb side of their site: because of the ceramic ball lock they have add a message:
“WARNING: CHOKING HAZARD — Toy contains a marble. Not for children under 3 yrs.”

The shackle key is a little on the small size and did not work with all the shackles Pascal had on his boat. Also we were able to force close the marlinspike with our bare hands. The ceramic ball lock-up for the marlin spike is free floating and, therefore will not form any wear spot while in use and, is very smooth in operation. It also seems I cannot reproduced that lock failure now…Perhaps it was dirty or something ? Anyway…

It does not make the Tusk spike dangerous for hard use (the spike got a choil) and it can get a lot of utility from board to starboard… And yes, it’s almost addictive to untie an dry salty knot with it hence the handy clip to keep the Tusk close.

The tusk is a handy tool to loosen knots without having to cut the rope or cordage and forget about any corrosion in salty environment.
It’s also a crew knife that would deploy its blade with ease, and remain locked open under any aggressive uses while under way.

Advertisements

SPYDERCO C06TI TUSK – PASCAL JAFFRE’S REVIEW “INSPIRATIONAL BLADE”

Once in a while I invite some friends to write reviews about knives. Pascal Jaffre is a passionate of classical music, shooting and computing with a lot of cultural background, he’s also a skipper. So, he was the right person to review the

“Inspirational blade”


A Spyderco Tusk Review

« Try Spyderco’s Tusk folding knife and tell me what you think about it! » were captain Nemo’s words one evening at the shooting club in Asnières (town’s name comes from “ane” = donkey). No donkey hunting for Tusk as the quadrupeds long left the patches where they used to graze and rest from barge tugging against the Seine’s current. On the contrary, Tusk’s tasks have been diverse and peaceful; in turn it has proven to me as a great inspirational source!

If I were a castle, which one would I be? Marlinspike Hall of course and Tintin would have been better equipped against the “l’Oiseau brothers” with me in his pocket.


Could I have influenced world famous composers like Mozart and Wagner? Maybe I have… take a close look!


Given that folded, my shape resembles that of a drop of water, had I been a musical note, which one would I have been? “A flat” of course which is Chopin’s “drop of water” in the famous Prelude N°15 – Prelude à la goutte d’eau!


Transposed to music this picture does not sound as harmonious as it looks: A-flat and G (Tusk and la sole – not Schubert’s trout)! The fish was delicious and it was a pleasure to eat “a flat” fish with a G-em.


More seriously let me show how sharp the blade is. Even trickier than the tomato test: the rotten pineapple test! Hard on the outside and soft (much too soft) in the inside. However Tusk did the job perfectly and my trash can got the pinapple – less the first bite.


Let’s finish off the food test with a panel of some other tricky things to cut. The sausage (saucisson): very thin slices. The avocado hard skin and yet ripe inside not crushed and perfect cut. The well cooked French bread – I was really impressed how a blade without dents cut the crust. To finish 2 types of Comté cheese (24 and 32 month aged) from the Jura region. The most difficult cheese to cut out of the 2 is the eldest because less moist and having a tendency of breaking: Tusk cuts the cheese at ease!


Birds of a feather? No, not feather but leather – courageous Tusk about to beat the baby crocodile and the result is below! Well done Tusk!


Good hunt!

Tusk also participated in the assembly of C 4.8 my French catamaran built in the early 80’s.

The result I’d say is contrasted in the sense that in my case the marlinspike was preventing from using the shackle key. This is due to the small volumes in which the tool needs to evolve. Had the shackles been oriented with a 90 degree rotation, that limitation would not have appeared.
Here is a demonstration of how the marlinspike limits the rotation: blocked at one point by the top of the hull. Obviously shackle keys that have an outer curve add further difficulty so it’s important that the tool be as thin as possible.

Another similar situation when installing the shackle key that holds the stays, forestay and shrouds to the mast. Again unfortunately the length of the marlinspike hinders the ability to rotate by a wide angle. However what I found really comfortable is Tusk’s ability to deliver power when working with the shackle key; this is due to its length combined with its overall robustness.

So to summarize a long strong tail does not necessarily get to go everywhere! That said, as during the assembly of C 4.8, wind was blowing up to 33 knots the marlinspike eventually had a good effect after putting it in the wind because in the evening we were down by some… knots!

Tusk ne manque pas d’air!
Tusk has been a great knife to test: discrete in the pocket, a beautiful gem that fuels imagination and a strong working tool. I’ll have to test against larger boat!

(Text and Photo Pascal Jaffre.)

Tusk !

Pascal Jaffre