Tag Archives: M398

Advice, Folders, Review

MIKE READ PITS™ 2 – C269TIP – Part 2 – Low Profile De Luxe SlipIt.

Leave a comment

Digression: Did you think we were born in peaceful times?

In Western Europe today, amid increasing concerns over violence and insecurity, carrying a fixed blade — something I’ve done for decades with a short fixed blade — or even a locking folder can easily be misinterpreted.

And every single day, in the fall of 2025, the European newspapers report yet another knife attack or crime.

Knife attacks in the United Kingdom have shown a persistent and worrying upward trend in recent years. National data indicate that police recorded just over 53,000 knife‑enabled offences in the latest annual cycle, with assaults and robberies accounting for a substantial portion. While knife-related homicides represent a small percentage of overall offences, the absolute numbers remain high, with young people disproportionately affected. Offences involving the possession of bladed weapons have also risen, highlighting broader issues of accessibility and carrying habits in urban areas. Compared to a decade ago, knife-related violence has increased significantly.

(From a locking folder to slipjoint folder…. Sign of the times ?)

Most knife crimes in the UK use everyday knives like kitchen knives, because they’re cheap and easy to access. But a significant minority of attacks involve more “exotic” or dangerous blades: like machetes !

In Germany, some state-level police offices estimated more than 21,000 knife attacks in 2022, which corresponds to about 60 knife attacks per day nationally.

In France, knife attacks also remain a major concern, with more than ten thousand recorded assaults involving bladed weapons in the most recent year across areas policed by the national force alone. This figure corresponds to roughly a few dozen attacks per day and does not include all regions or the gendarmerie’s jurisdiction. Schools in the Paris region reported over a hundred knife-related incidents within a year, highlighting a sharp increase in youth involvement and the normalization of carrying knives. Broader national indicators show rising attempted homicides and a high proportion of armed robberies committed with knives, underscoring the central role of bladed weapons in everyday violence.
French law places certain knives (e.g., automatic opening, butterfly/balisong knives, fixed-blades over a certain size, double-edged blades) into stricter categories (Category D weapons) when carried without legitimate reason. Folding pocket-knives of everyday use (e.g., classic French models) are more tolerated — they may be treated as tools rather than weapons if not used aggressively or carried without justification.

CountryEstimated Knife-Crime / Knife-Attack Rate (per 100,000)
England & Wales (UK)~89 / 100,000 (using ~55,008 knife-enabled offences and a population of ~61.8 M)
France~15 / 100,000 (based on ~10,397 reported “knife attacks” and a population of ~68.6 M)
Germany~10.7 / 100,000 (using ~8,951 knife-attack figure from 2023 data)



In the UK, the rules are straightforward: a non-locking knife with a blade under 3 inches.
But now it seems that one-hand-operated folders are no longer welcome;
For the record, one-hand operation is actually safer: not only for opening, but also for closing the knife. A closed folder is a safe folder, and being able to switch your tool into “safe mode” quickly is a genuine advantage.

In France, things are far murkier — everything hinges on intention and context of use. It’s almost a Minority Report situation.

Ironically, in the country of Opinel and Laguiole, we’re now backpedaling because of sheer stupidity. And I’m not blaming the criminals who use knives to hurt people — that’s obvious. I’m blaming the people who carry a knife for self‑defense.
After a search from the Police in front of an high school:
“Why do you bring this knife to school ?”
“To defend myself !”
A knife is not a self‑defense tool — it’s a catalyst for problems.
Awareness, on the other hand, is a self‑defense tool, and that’s something you really need to keep sharp.
Even something as simple as wearing AirPods can compromise your ability to stay safe, cutting you off from your surroundings.

Unless you’re a gangster settling scores with your own kin, a knife will never be your bodyguard — not even with training.
In fact, it can make things worse, especially if you think you’re “trained in knife fighting.” A knife as a weapon is a killer’s tool, meant for ambush and combat, not for duels.

(The only blade that might actually “help” you — for example in an attempted‑rape situation where you are physically overwhelmed, dominated, and restrained — is also the one that will almost certainly land you in even more trouble afterward. And if you ever reached that true last‑ditch moment, your best hope would ironically be a short serrated edge rather than a razor edge; under an adrenaline surge, an aggressor won’t even register a clean cut. The Spyderco Manbug Wharncliffe SpyderEdge comes to mind.
But even then, you would need the mindset to become the aggressor just to survive — and you must be prepared to defend your actions in court afterward.)

I remember reading about an elderly man who was being harassed by a gang of young men. In the confrontation, he slashed the hand of one of his aggressors with his Swiss Army Knife — and in the end, he was the one standing before the judges.
“To claim self‑defense, sir, there must be proportionality between the attack and the response.”

“It’s also a mindset.
I’ve carried a knife since I was 9 and have never had the inclination to cut or stab someone.
It’s all about how you have been raised.”
Des Horn

So let’s remain ladies and gentlemen, and let’s be low profile in our EDC choices.
The knives we carry and appreciate are not pocket bodyguards — they’re tools we genuinely enjoy using for simple, everyday tasks.

Enter the Alien/PITS2 and the whole generation of modern slipjoints.

Carrying a knife in today’s civilian world means opening parcels, prepping food, cooking, doing small repairs — being a handyman or -woman, or at least trying to be. I’ve written before about the modern slipjoints we now have access to: knives that benefit from three decades of “tactical” evolution. They offer deep-carry clips, true one-hand opening and closing, and high-performance steels refined for modern cutlery.

All of that is perfectly embodied in Spyderco’s SlipIt line.



So why would you choose a Mike Read folder? Is it better than a UKPK or an Urban?
Nope. The SlipIt flagship UKPK, for example, also has a thin edge, and you can even dress it up with titanium scales if you feel like it. Its mechanism is also stiffer, with a two-stage closing “safety” that makes the blade feel more controlled on the way down.

So why choose the PITS2?
It ultimately comes down to taste — your willingness to spend a bit more, your appreciation for the mechanism, the maker behind it, and of course a love for titanium and M398.

So what does the Alien/PITS2 truly bring in the long run?

In my case, I was genuinely surprised by how this “hard-to-open-one-handed” knife has grown on me.
That stiffness actually makes it reassuring to carry — you know the blade won’t pop open by accident. Especially when you carry it in the back right pocket.

First: it slides in and out of the pocket effortlessly.
That deep-carry clip is a real asset. It reminds me of the C181GTIP Lil’ Lionspy — also made in Maniago — but this one is even better than a wire clip: smooth, secure, and gentle on pockets.

Even though it’s light, the PITS2 feels dense and substantial in the hand. If you love titanium, you immediately recognise that warm, almost organic sensation it gives in the palm. Chris Reeve was the first to offer that pure‑titanium tactile experience, and the PITS2 carries that same aura.

Then your thumb finds the hole. It’s stiffer than most Spydercos I know, but that final click when fully opened is immensely satisfying. Forget about using your ring finger — it’s your thumb or nothing.

The hole is sharp enough to allow a “Spyder‑Drop,” though it occurs in two deliberate steps rather than one smooth motion.

Another major advantage: the PITS2 cannot pinch your fingers during opening or closing — a problem that the PITS1 sometimes had.

And, as I mentioned in the quick first‑look, that relatively tall blade comes with very thin geometry. This is the first Spyderco edge in a very long time—aside from my Chaparrals—that didn’t need to be convexed. I usually “de‑shoulder” everything to my taste and to my standard test: the plastic bottle butt.

This is where the PITS2 truly shines: pure cutting performance.
So far, it has never disappointed me. At first, I thought its more “gentle” blade tip wouldn’t be pointy enough for my tastes—especially since I’m used to the UKPK, Yojimbo 2 or the Microjimbo—but the PITS2’s tip is razor‑keen. It finds its way into soft or dense materials with nothing more than a light, controlled pass.

Actually, butter knives do not need to be sharp. 😉
The PITS2’s thin edge can slip effortlessly through delicate materials—like slicing a layered birthday cake without crushing it. And it can zip through cherry tomatoes, which is always a great test of geometry and edge aggressiveness. Tomato skin resists, tomato flesh is fragile; a good blade needs to pierce the first without mangling the second.

Well, well, well… go figure: tomatoes can be tricky — and a perfect opportunity to put your favorite edge to the test.
But honestly, what more could you ask for from a good EDC, superb slicing ability. A sharp knife is a safe knife.


M398 in that matter continues to surprise me. It reacts to leather like… K390 ! Amazing steel !
I’ve already used M398 on the Roadie XL and the Metropolitan, and it proved far more forgiving than I expected. I initially thought it would be brittle — especially after snapping about half a millimeter off the tip of my Roadie XL — but in everyday use it has shown itself to be an excellent alloy that also responds beautifully to stropping.


After some real use, I still haven’t managed to chip or even noticeably dull the PITS2’s thin edge. What’s remarkable is that it’s still as razor-sharp as it was right out of the box.


I also love how easy it is to check, clean, and oil the PITS2.
I can appreciate how skeletonized hidden liners have added lightness and strength to folding knives, but they also tend to become little nests for rust. For that reason, I really appreciate it when liners are DLC‑coated — and even better when they’re made of titanium.

Regarding the PITS2’s titanium handle, the absence of hotspots and the beautifully beveled edges make it a real pleasure to hold.

The cutout for the mechanism isn’t beveled, so you can feel its slightly sharper edge. I’ve also noticed that the two handle slabs are symmetrical, while the cutouts around the pivot are not identical.


Low profile usually comes with a deep‑carry clip or no clip at all… but the PITS2 clip is really shiny, so it still catches the eye. I know, because I’ve checked my reflection in a mirror and eventually had to unclip it and drop it deep into my pocket before passing through security recently.
Low profile wise: a tip if you are ever checked, do not open your knife with one hand, use both.

In those days of increasing knife crime and genuily believe that your EDC’s shape needs to be sheeple‑friendly.
If I pull out my fully serrated Native Chief Salt, anyone around will instantly assume that this long, pointy, toothy, shiny blade is straight out of Jack the Ripper’s toolkit.


The PITS2, with its rounded profile and non‑threatening blade shape, is a perfect example of a legal and friendly high tech EDC that won’t raise any eyebrows if used in public.
It’s actually even less threatening than a UKPK.

ll in all, the PITS2 delivers on its promises.
Incredible thin edge. Enjoyable mechanism. Low profile. Easy to clean.

It’s a friendly, high‑tech luxury tool that can be brought to the table to slice a sausage, yet also serves as a reliable outdoor companion capable of carving a walking stick. I’m loving the Alien in these times of shifting paradigms.

So let the weary land be rested and the killing season over
Let the shadows stretch forever in the light of burnished silver
For I fear the age of consequence and I wish that it was over
Bring me the snowfall, bring me the cold wind, bring me the wiener…

(My Nano has been heavily resharpened into a convex edge, while my PITS2 comes with its thin, perfectly even factory edge.)

Folders, Review

MIKE READ PITS™ 2 – C269TIP – The Legal Alien

Leave a comment

Disclaimer: This knife has been provided through Spyderco’s Ambassador Program, upon my own request. Thank you to the Spyderpeople for letting me review it.

This is a first look, first glimpse review — my very first impressions!

Mike Read’s custom Alien (£400,00 Elmax Blade) was presented to the world in November 2023, and it is now produced by Spyderco through Maniago, Italy under the name PITS 2 in 2025 for around €300,00.
So this is an English design, produced by a Colorado-based company, and manufactured in Italy — you can’t get more international than that.

To respect the King’s Law in the UK, you need to carry a non-locking knife with a blade under 3 inches, and also have a good reason to carry it on your person. The PITS 2 respects those rules and looks far less threatening than the original PITS 1.

This isn’t my first Mike Read design — I reviewed his PITS 1 back in 2018 and loved it. That knife was his very intention of creating a solid workhorse with no lock. Two years ago, a sprint run in M390 appeared.
Now comes the PITS 2, in M398, and to me, this is a much better design. Here’s why.

“Pie In The Sky” (not pig!) was Mike Read’s nom de guerre on the British forums. His specialty as a knifemaker is crafting non-locking knives: state-of-the-art tools with titanium handles and obsessive attention to detail.
The PITS 1 was a looker — but the PITS 2? It’s eye candy.

Here’s a video from The Crafter Carry about the Alien:

Compared to the more angular tip of the custom Alien, I find the PITS 2 blade shape more graceful, with a nicer drop to the point.

The custom Alien used a titanium clip, whereas the production PITS 2 wears a steel one — but I actually prefer Spyderco’s version here.

What really makes it stand out is the handle mechanism:

“A truly unique non-locking mechanism that consists of two integral spring arms machined into the handle scales. The forward end of these arms, which supports the blade pivot, flexes as the blade is opened to provide pressure for its notched-joint mechanism to bear against the stop pin.”

That’s clever: just two integral spring arms machined into the handle that hold tension on the blade pivot. The absence of a traditional backspring makes for an open-handle design — easier to rinse under the tap and keep clean. Exactly what you want in a workhorse.
(Let’s be clear: If you anticipate heavy-duty work (construction, field outdoors, survival uses) where a strong locking mechanism is required, then this may not be the optimal choice — you’d trade some robustness for style and finesse.)

The blade is made of Böhler-Uddeholm M398 particle metallurgy stainless steel — a steel in the same class as CPM S90V. It holds an edge forever, though it’s not the toughest, and you’ll need diamonds to sharpen it.
I once broke the tip of my Roadie XL after a fall on tiles, but when used as intended, M398 is delightful. I’ve worked my Roadie XL and Metropolitan hard, and M398 has never failed me. This steel would be perfect also for hunters which need long edge holding when skinning.

Mechanically, this is the first Spyderco I’ve handled that’s harder to open than to close. The blade retention in the closed position is quite strong, while closing is much softer than most slipjoints. With wet hands, I even find it tricky to open — I have to “Spyder-drop” it by holding it by the hole!

At least, if a Police officer asks to see it, you must open it with two hands — another good point, as it’s clearly a gentleman’s knife, not a weapon. Also, while the PITS 1 looked somewhat like a skinner, the PITS 2’s drop point blade is much less aggressive-looking.

Inside the “cockpit,” there’s now a choil and a gentle hump, allowing a secure grip near the blade — something the PITS 1 lacked with a more aggressive quillon or guard for the index finger. So even with its softer closing action, it’s not a real issue. Still, when whittling hardwood, beware: that tall blade can snap shut faster than a UKPK or an Urban, both of which have stronger backsprings. Always use the choil!

The tall, thin blade arrives razor sharp out of the box. Geometry is spot-on for push cuts, and like the Slipjoint, Manly Wasp, Chaparral, or UKPK, performance is excellent. Let’s call that: “Perf In The Sky.”
This will be a great travelling companion and even a hunter best friend.

Totally UK legal and of the highest quality imaginable, the PITS 2 is not a cheap knife — in fact, it’s pricier than the Chaparral Slipjoint — but it has that “Sebenza-like”feel of a high-quality titanium folder. A gem of a knife, and one of the rare non threatening slipjoints truly designed to be a hard worker.

As rare as pies in the sky! 

Folders, Review

Spyderco Cobol — The Modern Ikuchi, or Just an Exercise in Style?

2 Comments


Today’s review is a bit special.
Every now and then, I like to invite other reviewers and true knife enthusiasts to share their perspective.
This one comes from Guillaume Gx, moderator of the Spyderco Fan Club on Facebook — and a man who definitely knows his way around an edge.
Also all photography featured in this review is the work of Guillaume Gx.

Let’s get straight to the point — much like its sibling, the Nand, the Cobol doesn’t carry a knifemaker’s DNA.
This is not a blade born from the forge, but rather a stylistic exercise, a conceptual piece with a distinctly “Japan-inspired” design. And that’s where any comparison to the Ikuchi ends.

Mechanically, this slipjoint shares the same traits as the Nand: soft tension, little to no sense of security. A light press on the spine will start the blade folding, which instantly rules out anything beyond light, food-related tasks.

But perhaps that’s the idea. The dining table seems to be the natural battlefield for this miniature katana.
Unfortunately, the sweeping arc drawn by the handle and blade demands contortionist wrist angles, while the tanto-style tip hardly helps when it comes to cleanly separating food. In this arena, the Ikuchi—or even the Nand, with its almost twice thinner blade—will fare gracefully where the Cobol clearly struggles to hide its discomfort.

Gone is the Nand’s M398 steel. The Cobol features an M390 blade—beautiful to admire, but challenging to sharpen. Guided systems will have trouble catching such a low-profile edge. Seasoned sharpeners will need to rely on freehand skill to bring out a proper cutting edge (the factory edge being nothing to brag about).

So, is reason telling us this is a flop?
Not quite. Let’s remember that, like the Nand, the Cobol wasn’t crafted by a bladesmith but by designer Paul Alexander. This knife should be viewed as a concept piece, a non-knifemaker’s take on knife design, a genuine exercise in style.

You can’t help but salute the intent—and the audacity. Spyderco showed real boldness in releasing two designs that stand as true UFOs in the eight-legged universe.

And so, I look to the sky, hoping to see another one someday.

(The Nand and the Cobol)

Folders, Photos

SPYDERCO METROPOLITAN™ LIGHTWEIGHT – C213PBK – The Perfect Hunter Slipjoint ?

4 Comments

Disclaimer: This knife was supplied at no cost by Golden as part of their brand ambassador program. Spyderco’s decision to include this publication is appreciated, though the review that follows remains independent and unbiased.

This is my first glimpse at the middle Brother of the SLIPIT™, the Metropolitan.
Made in Maniago. It is an Italian Spyderco.
Un altro piccolo grande coltello !

It is the second Spyderco Slipjoint in M398 after the Roadie XL which I use a lot !


It is made in Maniago like my Heinnie Urban and it is a pure Sal Glesser design.
The blade comes razor-sharp straight out of the box. The factory edge is excellent, though I know it can be refined just a touch on leather. It’s a very thin grind—thinner even than on my Roadie XL. While M398 isn’t as leather-friendly as SPY27, it can still be brought to a high polish, as I managed with my Roadie XL after breaking its tip.

Being slightly longer than the Urban, the Metro’s handle comfortably fits four fingers when using the choil. This choil also adds an important safety feature, preventing accidental closure on your fingers. The choil-hump combinaison—acts like a guard, directing cutting force straight into the blade while relieving stress on the handle and pivot.

“Metro In the Middle” pictured: the G10 SPY27 UKPK “Golden Child”, the Metro and the Heinnie G10 S90V Urban.

To quote my friend Wayne Thomas Heywood Adamson: “So now we have a middle ground between the UKPK and the Urban. I was surprised when the Urban shrank in size but that was clearly now to make room for the Metropolitan.”

(Made in Golden – Maniago – Maniago.)
The 68mm Metro’s blade thickness measures 3 mm at the spine, with a full flat grind in a leaf-shaped profile. By comparison, the longer UKPK “Golden Child” comes in at just 2.5 mm, which makes it the undisputed king of SlipIt designs. That said, opting for a slightly thicker blade in M398 is a sound choice. M398 is not known for its toughness—certainly less forgiving than Spyderco’s in-house CPM SPY27 alloy—so the added thickness provides welcome reinforcement.

The S90V Urban is 2,9mm !

And the Roadie XL is 2,8mm

Making the Metropolitan the thicker of the wild bunch !
By an hair !

Now about the weight…

At 51 grammes it is really light in the pocket.

The action is very good. It is as strong as my Urban and UKPK. perhaps a bit less hard to close but this is not really an issue.
I have noticed the Metro’s back is a full spacer/spring construction like a G10 version (when the UKPK FRN Salt is not for example.)
It does not share the same “fork” spring of the UKPK but the same slipjoint mechanism as the Urban.
You can feel the spacer moving up when closing.

So what can we expected from this Metropolitan compared to its siblings?
A little more room for your fingers. The Urban and the Squeak are three fingers knives, the Metro and UKPK are four fingers.
This is also an opportunity to showcase M398 in a high, full-flat-ground, thin blade. The Roadie XL’s narrower profile already favors cutting efficiency, and the Metro builds on that. In terms of edge retention, M398 belongs in the same category as S90V—a steel I know well from my Urban model, where securing an exclusive sprint run was a real challenge. With the Metro, however, M398 is now part of the regular production lineup, offering users a true “super stainless” steel in an accessible package. But beware M398 does not like torsions, like my Walker in ZDP189 which has been able to survive all those years.

The Metropolitan could really be a major upgrade for my Italian Hares Hunter in Tuscany. For the record, skinning game—especially dealing with hair full of sand and dirt—puts a significant challenge on edge retention. Hunters typically don’t use their knives for woodcraft; their main task is working on hares and similar game. In that context, a blade of 68mm in M398 could offer a real advantage.

The Metropolitan—easy to carry, legal in many countries, and made of stainless steel—could be the perfect hunter’s SlipIt, which is great news for many of my friends.

Review

Spyderco Roadie XL C267BK – Part II – Shattered Tip.

2 Comments

M398 is a fragile steel compared to M390. The encounter of the tip of the Roadie XL with a tile of my kitchen has been definitive. One mm has been shattered and now I got a micro flat screwdriver as a tip.
OK. Diamonds are steels best friend.
I’m able to form a new tip in a diamond shape.

For now I won’t baby that Roadie XL anymore. I decide to thin the edge.

The best way is to protect the blade to avoid any big scratches.

Then it is time to play with industrial diamonds.

I will also use some diamond rod to round the jimping.

Of course I’m enough clumsy to scratch the blade twice and I’m obliged to use some diamond paste to treat the surface.

Then some polishing paste on the leather to slowly makes it like a mirror.

I’m quite happy with the result.

Time to test this new geometry. The edge has been convexed and thinned it should cut much better.

One of the most difficult task is to cut in two the butt of a two liters plastic bottle. This is a test my Scandi blades fail all the time. Any Opinel is king in that. Or the Manly Wasp ! My favorite being the Nilakka.

As a whittler it goes deep in wood.

As a steak knife, the shape of the blade brings only the new tip in contact with the ceramic of the plate.

That new tip is strong enough to be able to pierce a metal lid of a green bean jar. A hole pierce help the release of the lid on some jar.
No damage no more.
Now the Roadie XL cuts much butter.

Review

Spyderco Roadie XL C267BK – Size matters

3 Comments

Six years ago, I reviewed the Working Poney, also known as the Roadie. Mine had been reprofiled by Jan Dirk, and even on its tiny scale, it proved to be an outstanding performer. For six years, it quietly stowed away, accompanying me across the UK, Vietnam, and countless places where knives were frowned upon.

Then, in 2024, I noticed the announcement of an XL version — the C267BK — featuring a better steel and a clip. Right away, I saw the new pointed blade, replacing the classic sheepfoot-style blade, now ground from Böhler-Uddeholm N690Co. Even more exciting, the XL uses M398, an exotic steel reserved for flashbatches — a serious step up in terms of performance and collector appeal.

And so, here it is: Ladies and gentlemen, the Roadie XL !

They say an image is worth a thousand words, so here you have 4,000 words with no syntax or spelling errors.

Back to the Roadie XL: it is made in Maniago, Italy, just like my Nano and many other excellent knives these days. The Maniago plant remains one of the best worldwide in terms of quality and precision.

Specifications:

  • Overall Length: 6.51″ (165mm)
  • Blade Length: 2.74″ (70mm)
  • Steel: M398
  • Closed Length: 3.76″ (95mm)
  • Edge Length: 2.31″ (59mm)
  • Weight: 1.5oz (43g)
  • Blade Thickness: 0.108″ (2.8mm)

Its shape and size make it extremely pocket-friendly, easily fitting into the watch pocket of a pair of denim jeans thanks to its deep-carry wire clip. You could remove the clip, but why? It keeps the knife perfectly on the pocket’s lip. The clip is also reversible, though that’s not mandatory for a two-handed opening folder.

With its thin profile and light weight, combined with the clip, the Roadie XL can even be carried in a shirt pocket like a pen. In short, it’s a knife meant to stay on your person almost unnoticed.

The action is smooth, with two stops/steps before the blade fully opens. In practice, it feels smoother than my Urban, which only requires a single hand to deploy.

With a slightly longer blade than the Urban, the Roadie XL remains legal to carry in countries such as Denmark, the UK, or Germany. Mine arrived razor sharp straight out of the box, so I’m in no particular hurry to convex the edge.

Mine came razor sharp right out of the box. So I’m not in a special hurry to convex its edge.

You can immediately recognize Sal Glesser’s signature design—a clear mark that it’s his invention. Sal is an inventor, and it’s always impressive to see how he manages to create clever, practical tools. Quoting him directly:

“When the Transportation Security Administration (TSA) briefly considered allowing the carry of knives on airplanes again, Spyderco designed the Roadie™ to fit their guidelines. We created an incredibly popular modern expression of the classic penknife. Since bigger can indeed be better, the Roadie now has a big brother: the Roadie XL. It faithfully offers all the defining features of its smaller counterpart—including a non-locking “notched-joint” mechanism, a textured index-finger choil, and contoured, injection-molded handle scales. Its full-flat-ground sheepfoot-style blade is crafted from M398 stainless steel and features our distinctive “Double Dent™”—a pair of symmetrical dimples in the blade that provide a solid purchase for a fingernail-free two-handed opening. In addition to its larger size, the Roadie XL also adds a deep-pocket wire clip for convenient top-of-the-pocket carry.”

Now, let’s talk about M398, one of Spyderco’s premium powder metallurgy steels, only available in limited flash batches, all made in Maniago, Italy.

From what I understand, M398 is closer to CPM-90V than to M390. Quoting Darrin Thomas’s analysis (which is worth reading in full):

“The original M390 has a reported carbide volume of 20.5%, and the new M398 has about 30%, so there has been an increase in carbide of almost 50%. We would expect this to lead to a significant reduction in toughness along with an increase in wear resistance. The datasheet shows that the toughness of M398 is only about a third of M390, though at somewhat higher hardness. So it is apparent that the design of M398 is all about wear resistance and essentially ignores toughness. M390 has only slightly lower toughness than K390 with similar carbide volume (though K390 was tested at 62 Rc). M398, on the other hand, has significantly less toughness than the similar carbide volume S290. However, M398 does have some positive traits, such as increased hardness and reduced retained austenite relative to M390. I’m personally not all that interested in yet another high edge-retention steel that sacrifices toughness, ease in sharpening, and workability. We had other options and this initial look doesn’t make M398 appear to be an improvement over the other available steels. M398 was a relatively simple modification of M390 and I can’t help but think that a more optimized version could be made. M390 did offer similar toughness to cold-work tool steels like K390 with a similar carbide volume, but M398 has significantly lower toughness than the similar carbide volume S290. So M398 doesn’t appear to be over-performing relative to its composition and carbide content. I wrote about some Bohler-patented high wear resistance steels using niobium instead that look very interesting but haven’t seen a commercial release. Those steels would be breaking new ground and potentially offering new property combinations not previously available. But if Bohler pushes out M398 more broadly it will be interesting to see how knifemakers utilize the steel for applications that benefit from high wear resistance and edge retention.”

When M398 was used in a previous flash batch for the SpyMyto, I wasn’t particularly excited—it felt like overkill for a folder that seemed built for hard use. The Myto is essentially the big brother of my Nano made in CPM Magnacut, and a SpyNano in M398 is also on the bench. In comparison, Magnacut is far tougher than M398, making it more suitable for wide, workhorse blades.

On the Roadie XL, though, this is a different story. Like with my Heinie Urban in S90V, these small blades are not intended for bushcraft—but some highly skilled bushcrafters can make miracles with even a 2-inch slipjoint, as shown in an inspiring video I recently saw.


Slip-joints are gentle companions for both ladies and gentlemen. For those with long nails, the Roadie XL is equipped with its distinctive “Double Dent™”—a pair of symmetrical dimples in the blade that provide a solid purchase for a fingernail-free, two-handed opening.

Its high wear resistance comes in handy, as these small blades often encounter cardboard, which can be surprisingly abrasive. I also recall Roger, my father-in-law, wielding his old Pradel slip-joint like a crowbar or flat screwdriver, without a second thought. Old-timers often treated knives mercilessly, using them until the blade was as thin as a needle.

I’m confident the Roadie XL with its M398 blade would make an excellent hare skinner—the fur is full of sand that can destroy an edge almost instantly. Tuscan hare hunters would likely appreciate its durability. Its high wear-resistant alloy makes perfect sense here. Additionally, the blade is relatively thick at 2.8 mm, which would otherwise be prone to breakage.

Ergonomically, the Roadie works beautifully for a slip-joint because you can hold the blade by its choil—a feature rarely found on traditional slip-joints. Even most Swiss Army Knives lack that level of security, and with M398’s toughness, the blade cannot close on your fingers. As Spyderco notes:

“Unlike traditional penknives, the Roadie also features a subtle index-finger choil that increases control of the knife during use and acts as a safeguard against unintentional closure.”

There’s no undue pressure on the pivot, often the most delicate part of many folding knives. If you are careful not to twist the point in wood, the Roadie XL can withstand applied force directly to the blade. This makes it another “Lil Big Blade”—small but versatile.

It can serve as a steak knife, whittler, label remover, balloon popper, nail cleaner, or cardboard cutter. Brown cardboard is notorious for edge damage, but not for an alloy like M398, packed with carbides.

And in today’s world, one more practical advantage: it is extremely sheeple-friendly. The Roadie XL looks like a pocket knife, not a tactical or soldier’s tool, making it socially unobtrusive yet highly capable.

Roadie, K390 Pingo, S90V G10-Urban and Roadie XL (all green letters mean they are linked to their reviews)

Beauty is in the eye of the beholder, but to me, this blade—shaped almost like a scaled-down cutlass—is pure eye candy.

Interestingly, I’ve discovered that I can open it one-handed in two distinct ways:

  1. A fast wrist flick while holding the blade itself.
  2. By gripping the blade with thumb and index finger and gently pushing the handle away with the middle and ring fingers.

So, even though it wasn’t designed as a one-hand opener, the Roadie XL can function surprisingly well as a one-handed knife in either technique.

Compared to a traditional sheepfoot slipjoint, the Roadie XL is incredibly light yet sports a premium alloy blade (Since August 2025 another slipjoint with M398 is available: The Metropolitan.).
And at under 100 euros, the Roadie XL is an exceptional bargain for what it offers.

This is one of Sal Glesser’s finest EDC designs—a true Every Day Carry folder that balances elegance, utility, and performance. And for once, size really matters with a Roadie. No wonder it’s already sold out on the Golden site!
There is part II here.