For a two-week road trip in Italy, the serrated Chaparral was my only knife. Sal Glesser’s Chaparral has been studied many times on this blog, but lately, the serrated version has become a central part of my rotation.
Why is this knife such a great traveling companion?
Friendly FRN handle: The grey FRN offers excellent grip, even with wet hands, making it comfortable and reliable in a variety of conditions.
Blade length: At less than 3 inches (71 mm), it’s easily accepted as a pocket knife. The serrations effectively add about 25 % more cutting edge, boosting performance without increasing size.
Flat and thin: Its slim profile allows it to comfortably fit in a watch pocket.
Sturdy mechanism: The hidden pin ensures zero vertical play, providing a rock-solid feel.
So this little big knife was my main cutting gear for two weeks.
I was able to open it in restaurant without to be noticed and replace the dull silverware provided. The serrated Chap is a folding steak knife by essence.
Its thin blade is making the cuts accurate even on delicate cream croissant shared with a coffee.
One of the challenge for such a thin blade is the famous hard cheese found in Emilia-Romagna: the Parmigiano Reggiano.
Normally, Parmigiano is not “cut” — a traditional leaf-shaped short knife is stuck into it and breaks off large chunks like a wedge. That approach wasn’t a problem for the thin CTS-XHP blade of the Chaparral. It dug in deeply and, with a slight torsion, fragmented the cheese effortlessly.
Hard sausages in Tuscany can be made from deer or doe or even boar. Again, bring a thing serrated edge to the board and it will be a success.
Pizza can be a challenge. You want to cut through all the layers without dulling the edge on the plate. Serrated edges do not dull easily in the plate. And even some knives encountered provide serrations at the end of the edge like this one:
Here the Chap near a friend’s Captain which has been used to deal with mozzarella.
It feels good to be not the only Spyderco in the village.
After two weeks with the Chaparral, I never felt “under-knifed.” It performed reliably in all conditions — rain, seashore, and forest — and remained socially unobtrusive. Its cutting power, thanks to the thin, hard CTS-XHP blade, proved that a pocket-sized chainsaw can be an essential part of any traveling kit.
After two weeks of use, the Chaparral showed no rust issues, no bent serrations, and no gritty mechanism. I simply rinsed it under the tap and let it dry in my pocket.
Even now, I don’t feel any need to resharpen the blade — the serrations are extremely difficult to dull. For a travel folder, I can confidently say: the Chaparral comes highly recommended!
If you want to see some spectacular moments from my two-week Italian road trip, I’ve released four video postcards on YouTube, all filmed and edited on the same iPhone 14 Pro that provided the photos for this article. If you enjoy them, feel free to give a thumbs up and subscribe to my Youtube channel.
You know what ? It’s time to thin the edge of Gambit. Pictures are better than thousand words.
The gaffer is here to protect the blade against my clumsiness.
The Double Stuff 2 is the main tool. But it is old now. It has lost some of its teeth in many many edges reprofiling…
But eventually it is a cheap Sharpy bought on Amazon which seems to be 15V best friend. It is 800 grit. And it bites into 15V like no tomorrow. So I was able to round the edge’s shoulder. Let’s test it.
It goes deep and steady. There is real improvement. But gosh, 15V do not like to lose its particules. Compared to Magnacut or SPY27, CPM-15V is hellish. Now I perhaps don’t have the best diamond tools for that. But really, it is not a piece of cake in my book.
Now could it be a answer: The Military 2 reaching the 67 HRC ? But that was exactly my impression after watching the YouTuber’s video — until Jake, a metallurgist for 14 years, left an exceptionally detailed, well-sourced comment under this review. To quote his conclusion:
“… Spyderco did an amazing job getting a near custom level heat treatment on an amazing steel at an affordable price to many people who otherwise wouldn’t have been able to spend large sums of money on customs. But expecting 67Rc is a bit too much. Shawn has said it repeatedly that it isn’t realistic for a production knife company to hit hardness levels that high and also be able to work the material.“
Many thanks to Jake for his eye-opening comment — truly appreciated!
My goal here isn’t to touch the edge itself, but to smooth the border between the flat of the blade and the edge angle. This allows me to maintain the edge primarily on leather while reducing drag when cutting hard materials like plastic or wood.
The equipment I used was again the Spyderco Double Stuff 2, focusing mainly on the diamond side. I experimented with gentle, round strokes on the flat diamond stone instead of always moving in the same direction — it seems to remove metal much faster.
For aesthetics, I plan to follow up with white ceramic or jade stones to approach a mirror finish, similar to the Sage 5. Magnacut responds beautifully to polishing, whereas CPM-15V doesn’t particularly care.
The use of gaffer helps preventing any deep scratches on the blade finish. It works great. The black dust is metal removed by the diamonds. I do that outside in the wind. I don’t want to breath that dust.
Eventually this second round has gone so smoothly (compared to the first one linked at the start of this review) that i was on the verge to work on the Military 2.
Remember Sal saying: “The Edge is a Ghost. Always changing. Dying (dulling) being reborn (sharpened) split personality (angles and geometry changing). Think of the edge as gas in a vehicle. It runs out of gas and you put in more gas. We provide the format, materials, design for use, variety to avoid boredom and create interest, but the edge is your creation. The result of your understanding, education, experience and practice.“
The comparison between the Sage 5 Salt and the Para 3 continues. In short: the Sage 5 has superior geometry thanks to its high 3 mm FFG blade, while the Para 3 features a sturdier blade, a thinner point, and is overall lighter (no steel liners).
It’s really your choice — both are highly capable and complement each other, coming from the same design mind. Shawn Houston even notes that the Para 3 carries “that Delica vibe.”
I’m impressed by the Sage 5’s exceptionally smooth action — one of the best among Spyderco’s compression lock knives. I love both knives. These days, the Sage Salt rides with me, but while both won’t let you down, the smooth Sage is more fidget-friendly. Both are great, but the Sage 5 is simply less popular… 😉
Let’s go back to the same process but adding 15 minutes more can be a game changer in term of geometry. But let’s be clear this is typically the Pareto law which says: “The Pareto principle states that for many outcomes, roughly 80% of consequences come from 20% of causes.” It means that in 15minutes + this new 15 minutes it is not the most efficient as 80% of the job was done during the 6 first minutes last time. But those added fistful of minutes are a little bonus to even the bevels.
As you can notice I have concentrated my thinning process mainly on widing the bevel.
10 minutes later, I got a more even larger bevel which should go shining after some leather stropping.
On another fistful of minutes, I will work on the tip but I like to keep some material here. Now I’m basically dealing with a flat grind with a convex edge at the end. In Japanese a convex grind is also called a hamaguri grind. Literally this means: clam. This name comes from the convex way the side of the shell moves to the end. Exactly like the full convex edge. A full convex grind is sometimes also called an appleseed grind. Again because of the pointy tip of the seed of an apple.( I’m a fan of アップルシードa Japanese manga series written and illustrated by Masamune Shirow.) But for now it is much than satisfying in terms of whittling and dealing with hard maetrail to cut. The edge goes deep in every push cuts and the high FFG blade five a lot of control for powerful results.
(Badge designed by Guillaume Xais)
So far my initial impression are confirmed: the Sage 5 Salt is a keeper and another 3 inches blade length Spyderco to rule them all like the Delica 4, the Native 5 or the Para 3 or even the UKPK ! All are Sal Glesser’s children (The Para 3 paternity is shared with Eric !)
It is perfect in all aspects – sharp thin blade, centered, strong detent compared to the Military 2, no blade play, suuuper smooth. The Sage5 is the best implementation of a compression lock I have ever had… Perfect tolerances and no lock stick.
The open-backed construction allows easy cleaning. This Sage 5 is really asking to be used and, thanks to its yellow handle, retrieved even on the forest or ocean floor. Really a must have 3 inches knife for all occasions. And I’m a huge fan of the Native 5 and the Para3. But this Sage 5 seems to lead the pack.
Seven years ago I was already in love with a KnifeCenter Exclusive Native. The idea to propose a smooth G10 handle was IMHO a great EDC enhancement as G10 can turn any knife into a pocket shredder.
As you can notice the Native 5 with its OEM clip can perfectly be clipped to a watch pocket.
I was certain I have missed the opportunity to own one of those smooth operators exclusively made for the KCI when, Alex, a fellow member of the Facebook Spyderco Fan Club France has pointed it to me. They were still in stock ! HERE !!
I know monsieur Howard Korn, the founder of the KCI, since his very beginnings back in the 90’s when he was all alone, and suggested me to design their logo. Howard was the very first reseller to propose knives on a big scale using a very new medium: the world wide web ! What a venture ! And eventually what a success ! It was before Amazon and Howard is one of the pioneers in terms of spreading the cutlery’s culture worldwide. Hence now the great videos which are produced in house. Again, it has been a smooth transaction from the USA to France thanks to a great customer service for a great exclusive. I may be biased but this is my customer experience for almost 30 years with the Knife Center: flawless and inspiring.
Eventually I have found out I have bought perhaps the very last one of those Native Exclusive as 10 days later my order (June2024) they are now out of stock.
So what do we got here ?
I have written a lot about CPM Cruwear ! But this tough and well balanced alloy which can provide a crispy razor edge is perfect on small or long folders. This is a workhorse steel and one of the greatest high tech alloy available in modern cutlery. I have even proved how hard it was to get a patina on it. This time with DLC coating no patina or rusting will be feared. BTW DLC Diamond Like Coating is used from implants. It is not toxic.
This all black version of the Native is ready to be used in all weather conditions.
So here we got a very low profile package with a none threatening design as black knives matter when confronted to sheeples who could point you as a Mall Ninja with a dark saber.
These days I am reluctent to carry in the city a long blade/folder and my search for accepted shorter knives, locking or not locking is evident. I have previously studied knives which can be used in the city and the Native is one of them. The idea is a maximum of polyvalence for a tool which should raise eyebrows. A friendly not threatening package. The knid of knives my grandfathers and father used to carry without any after thoughts but in planes. 😉 When heading for the countryside, I don’t restrict my self in terms of blade length but for a big city, I play a very low profile game and most of the time I do strictly follow the Law even if I’m not fearing any kind of Police check. Hence the Native: same cockpit as Hellboy which is used a lot in the kitchen as the Chief as turned into a Chef but shorter.
There is also a swedge or on the blade spine on the Native which is not present on the Chief.
The action is smooth with zero blade play as chute drop is obtain by releasing the lock. I have already written and how those Golden Native are top notch in term of fit and finish, using them since 2011.
This version with no liner is for me the best design and this Exclusive the best of the best. In those years of titanium frame locks and axis locks, the chance to own a great lockback is precious. And this one is for me: the Last of The Mohicans !
Since the reception of my Chief Native I have found that he was a sole survivor from a Xmas Mystery Box bought in Spyderco’s plant in Golden in December. In that box were different items and a rare Sprint Run Second Factory which was destined to end in my pocket and considered by myself IMHO as the perfect realisation of Sal and Eric ideas about pocket knives. In fact I think it is my favorite Spyderco ever. I have written a first review here. And now it is time for a second approach of Hellboy which has succeeded in kicking other knives from my pocket and quench my thirst for novelty.
So why ?
First the Native family feature an absence of hump on the blade making them very slick and beautiful.
Even the Shaman benefits from that.
The Chief is on the left and the Shaman on the right.
As you can notice the design of the Native Chief is really close to one of my favorite design: the AFCK. Sal Glesser was no stranger in the Benchmade BM800 AFCK back in the 90’s. He helped Les De Asis founder of Benchmade on it. They had both learned how to make Michael Walker’s linerlocks at Bob Terzuola shop. Both company were accelerating on the tactical lane in close formation.
As you can notice, my AFCKs (Advanced Folding Combat Knife) which was also designed by Chris Caracci a former Navy SEaL have been used a lot. The first version got a Spydiehole and the second version got an oval hole and an axislock. This design was one of my favorite for a big folding knife as EDC. And back then I was really in love with concept of tool highspeed steel on a modern plateform.
The same happend with that special Native Chief which got a very special alloy for its blade: CPM-4V. With that steel, the edge is strong and the thin blade is very solid. It gives a lot of confidence when cutting on a plate made of ceramic of glass. No chipping can happen. Hellboy has been used a lot for cutting pies and cake on glass plates and the edge behavior was not disappointing. When I have noticed a little shiny spot, some white ceramic was able to put everything back on line but it was really minor.
Now CPM4V is not stainless. It will form a patina or, worst, rust very quick and easily when used in acidic matters like cutting lemons and being used on a salad with vinegar. DLC coating is really welcome for that kind of behavior. Back in the 90’s Benchmade was offering only PVD coating which is really inferior to Diamond Like Coating. So far the blade of my Chief is not marked and scar by it various cutting tasks even when cutting. My previous Chief was a naked Rex45 blade and it was another story told here.
Even strawberries can darken the edge of CPM 4V.
But cheese is a great way to notice how DLC is making the surface of the blade less sticky but more stinky.
The Chief was not always used on gentle medium like wood.
It was also used on plate with vinegar salsa. Here it is basamic vinegar from Modena.
In the kitchen the knife is really behaving like an paring knife. It is really handy on fruits and vegetables. Its very pointy blade is great to carve. .The mechanism has never suffered from being wet and rinsed under water. The knife was smooth through and through its various wet works.
Now I like to have chamfered and smooth handles and blade spine. The Chief is known to be very square everywhere. The G10 has been easy to smooth with sandpaper used wet to avoid toxical dust. Now the blade spine is DLC coated and it was my esthetic choice to remove the coating on all the length of its spine.
I love the result.
It has been done with some diamond rods. Now the spine is much more confortable for my thumb in case of push cuts.
CPM 4V on that Native Chief platform is really the bread and butter for a strong thin folder. I’m not afraid to use hard on wood and plastic. And it is a must in the kitchen various missions. It has been also test on different hard wood and compared (geometry speaking) with many other knives I got. One of my champion is the Swayback in term of smooth pushcuts. But also the Wolfspyder and the Yojimbo.
My Chief needed more convexing and thinning to go to the level I was expecting. Again diamonds has been used handfree to remove the shoulder of the edge. CPM 4V keeps a very very crispy edge and bites in the wood very aggressively.
CPM M4 is a stunning alloy which is prefered on fixed blade but it is a gem on a long and thin folder. It makes it super solid with a very permissive edge.
Some will argue that toughness is not important in folders or fine slicing knives and feel that only edge retention matters in that case because they don’t use their knives in aggressive ways which are likely to lead to chipping. However, broken tips are still common on small knives and kitchen knives. And with higher toughness, the knives are better able to handle thin, low angle edges without chipping. And they can be heat treated to higher hardness to help prevent edge rolling and deformation, while still maintaining good toughness. This means that, indirectly, higher toughness can lead to better cutting performance because of the possibility of thinner edges.
The good news is that CPM Magnacut has been copied on CPM 4V behavior.
The K390 Delica has always been a monster of pocket knife (click on the name to go to my old review of the Delica with buffed sprint alloy). The thin blade mixed with the super tool steel allow (K390) alloy has proven to be amazing for hardchore. From their Seki Japan plant, Spyderco is producing many different K390 model, folders and fixed blades. The Stretch 2 being highly regarded as one of their best design.
So here you got an incredibly tough, strong and wear resistant blade on scales produced by Lynch. A typical Sal Glesser design: performance first !
But Lynchnw has taken that game to another league with their scale:
“A few years ago Casey put out a very limited run of the LynchNW MOD 1 Delica 4 and some scale sets. This is our newest Delica MOD 2 Titanium Scale Kit, modifying your choice of Delica 4 Knife with a set of Custom Titanium scales, featuring a forward finger choil, blade profiled scale holes, smooth bellied profile, a custom titanium back-spacer, enlarged lanyard hole, and a custom designed deep carry titanium clip. ” To quote Lynchnw.com site.”
What bring these new scales apart of adding titanium for the pure neo industrial look of it ? It bring many things:
A finger choil. A real one.
A longer handle and your pinkie will thank you for that.
A slim package which is soft on your pocket trousers.
Seven holes which are showing the edge of your knife when it’s closed.
See how cute is it ?
So here we got a very friendly city pocket knife which is not screaming “I’m a sword from Hell !!” like my new beloved Hellboy Chief or this AFCK in M2.
It looks like a lady and gentleman knife. But beware of the wolf in sheep’s clothing.
This one share the same core engine as a Police 4: K390 at 65HRC in a thin geometry ! It is a Metropolice knife.
As I was looking for a big not threatening folder, I was studying different wharncliff designs or sheepfoot blades for that matter. Ending my quest with that little Spyderco wonder in the previous review: the Dragonfly. But back to the QSP birdy pictured here with a Spydiechef:
But my need for a more longer blade (especially in the kitchen) was still on and then I have found that QS130XL-B – QSP Penguin Plus Titane. Same specs as my beloved D2 Blue Denim Micarta QSP but everything is different 😉 because this is the Penguin PLUS with: A longer blade. Blade length 8,6 cm.Blade thickness 3,5 mm. A flipper. A titanium handle A 20CV DLC longer blade. Length closed 11,4 cm. Ceramic ball bearing.. Lockbar insert. Titanium clip.
Weight 127g.
The price was 7 times the price of my first Penguin on thebestknives.eu in Vesoul, France. Great bargain and great service.
And here it is:
It is razor sharp right out of the box. Well balanced and all the contour are chanfered. It is a very nice tool knife. There is a serious heft in this blade. The action is not stellar because of the detent on the coating but the knife fires with ease thanks to a great detent and an heavy blade. The integral lock is a little on the sticky side but nothing dramatic. The whole package is a flat easy to carry medium folder.
But that thumb stumb as to go. Why ? Because there is no choil and if you miss your thumstud firing (instead of using the flipper) chance are high to get your thumb encountering the razor edge of the blade. So it has to go.
It was easily done with two torxes. Now I got a little hole but it suits me. I have done the same treatment 23 years ago with Benchmade BM710 this kind of treatment assures you to get a little longer working blade eventually as the studs loves to get in the way.
The tip looks like a sailor or electrician knife and seems strong enough for many knife tasks. In the wharncliffe blade design the point is in contact with cutting board or the plate and gthis one is pointy enough to draw my blood while writing that review… Well well now it is time for the real testing which will bring another review soon enough. This is a beautiful knife with a strong straight long blade which disappears in the pocket with its deep carry wired clip. That titanium clip retention is very good BTW. The handle is made of gorgeous bronze titanium which gives a nice patina look to it and eventually a very vintage toolish low profile look. This is destined to be a hard used folder used in middle of brass and copper. Its flipper is even providing a security guard preventing the hand to slip forward. Instinctively they are many grips and many usages to be considered for a solid folder. And in terms of edge retention, CPM-20CV is one of the best stainless steel to be found nowadays linked here. Not the strongest (like CPM-3V) but certainly one of the best balanced.
So this is really a nice knife to EDC to put to its paces.
Pictured here with a Ed Schempp Bowie.
And a Swayback.
And for the next step a de shouldering of the edge is mandatory. Diamonds work great.
Here is a Spyderco Folder designed by a Massad Ayoob the famous gun instructor and destined to be a Self Defense folding knife. An ineptia as far as I am concern. Any screwdriver could be used the same way, the rest is just marketing in a country with a huge personal arm market. Not for me. But if I were wrong ?
Massad Ayoob is an established authority, LEO (Law Enforcement Officer… a Cop) and a writer on firearms and (sometimes) on knives. For more than four decades he has also taught defensive knife and firearm programs and appears frequently as an expert witness in trials involving edged weapons.
It’s not the same problem for professionals, those, in the line of duty, who are confronted to knife attacks, cops and soldiers to name a few. But lambda civilians learning to defend themselves with a short blade tool (not “from” a blade) ?…. well this would be a very last solution of a very messy situation which certainly could have been avoid in the first place. Better than any edge tools to cut in ribbon an threat are “awareness” and mobility.
As a design, I always loved the C60 especially the ergonomy. Certainly not as a edge weapon but as a cutting tool. It functioned so well as a kitchen and general work knife. In fact the C60 was ranked as one of the best baguette opener in my folder world. Especially with my serrated version. Even when knowing the C60’s blade was especially made to fit between the ribs and penetrate deep into the human chest cavity, lacerating lungs, heart and other vital organs… (Puncturing weapons are legion if you look at any tool from wood chisels to crowbars, thrusting weapons are all around us. So I was never impressed by those marketing quotes especially when a wider blade can be turned at 90° to pass between the ribs… Oh well, tools of violence are as old as Abel’s murder by Cain.) Spyderco is no stranger to that self defense niche: Canis, Matriarch, Carahawk, P’kal, Chinook, Civilian, Yojimbos…
Blast from the past. Back in the 90’s, I had the chance to be one of the first European reviewers of the Master of Defense’s knives back in the 90’s. Jim Watson, James Keating, Massad Ayoob, Graziela Casillas and Michael Keating were the five instructors being part of that venture. Massad Ayoob was the only one providing a fixed blade: the MoD Razorback. The quick draw from its kydex sheath in reverse grip was its main asset. Massad was also timing himself to show how quick he could draw his knife. I actually love that fixed blade concept but its was all marketed and designed as a thrusting weapon, not a cutting knife. This is something which is also found on the C60: more penetrating than slashing compared to a Yojimbo 2 which is as pointy as slashy, 50%/50%.
The Razorback prototype is pictured in the middle and Michael Janich’s Tempest is on the right bottom, featuring his Filipino Grip.
Back on the Sprint Run, Michael Janich has written about the C60: “From a utilitarian standpoint, the negative angle of the blade definitely increases cutting power and leverage, allowing the user to maintain a straighter, stronger wrist orientation. Similarly, for piercing, it does align the blade with the axis of the forearm, allowing for a direct transfer of energy. If those qualities allow it to work better for your individual needs, I understand and respect your appreciation of the design. While you’re waiting for a Sprint Run, I also strongly encourage you to invest in a Schempp Bowie, as it offers all the same qualities for all the same reasons.”
That odd pistol angle: of the C60 was explained by its designer Massad Ayoob in those terms: “With a typical knife, thrusting lifts the blade’s point above the line of the forearm, like a boat prow going through water. The faster, harder or more resistance encountered, the higher the prow rises deviating the blade off course from its original target which can mitigate the depth of the cut.”
Its grip angle that is more comfortable and familiar to handgun shooters. That design is trying to be as much of a push dagger as possible without being a push dagger. The “dropped” handle design which is also a signature feature of many Ed Schempp designs also added power to the cut. Let me tell you something: this pistol grip makes great steak knives ! 😉
Quoting Massad Ayoob:
“The C60’s radical angle brings the blade into line with the long bones of the forearm, channeling the body’s force directly behind the line of the cut resulting in minimized blade deviation and maximized accuracy. The blade is directly in line with the radius bone of the forearm when the average human wrist is in the “locked” position, which puts the middle knuckle of the hand directly in line with the axis of the forearm.
This is what gives the C60 its superior stabbing accuracy, and it also gives tremendously more penetration, because it aligns the skeleto-muscular support structure of the arm with the point (number one), and therefore with anyone who knows how to put his weight behind a punch, gets the entire body’s force going directly behind the point.“
In 2001, twenty one years ago, I had the chance to test the very first batch. The handle was made of aluminium coated in black and the blade got that short opening arc. It felt like some kind of sharp pistol and it balance made it very pleasant to use. That smooth thin handle curved handle was really pocket friendly. But… it has a serious but. Its vertical play was unbearable. I mean, I try to enjoy it with it but eventually, it was drawing me back to small fixed blades, no mechanism, no blade play. I hate to feel the blade moving when I cut on a board.
Long story short: thet 2022 C60 Sprint Run got also some vertical play. But you need to push quite hard on a cutting board to feel it. I first thought this “rocking lock” would ruin the experience but eventually it is not as dramatic as on the first batch in 2001.
As you can notice the 2001 version was a rivet construction with 3 rivets on the handle. It is not the case of the 2022 sprint run with an all screw construction on G10 slabs instead of aluminium.
How that almite coated handle has survived after 20 years of service ?
This is a picture from C60 #356 from my friend, Joyce Laituri, at Spyderco. Isn’t it a beauty in the patina departement ?I love well used tools and Joyce considers her C60 with serrated edge as her personal favorite Spyderco.
“…I‘m delighted to see the enthusiasm for the C60.Changes? I wouldn’t care to see it thicker: the comfortable ride in pocket or waistband was one of its signature features. I’m partial to G10. As others have noted, I think we got the overall design and blade configuration right the first time. Steel? I’ve been very happy with the VG-10 in every respect after carrying the C60 for about 18 years now and using it daily. However, Sal knows WAY more about blade steel than I do, and if he has a supersteel he thinks will work better, I’ll defer to him...”
It is an immense success and the serrated version is even selling faster than the plain edge version. Go figure !
A Japanese Story: The C60 is a knife all made in Japan (using now an American steel when the first batch was made in Japanese Steel VG10) Sal Glesser has also explain the story behind that whole C60 2022 project and the Japanese family in charge of it:
“We began working with this maker in 1988. At the time, they were considered by most experts, even in Japan to be THE premier quality knife maker in the world. It is/was a small family business consisting of the “Old Man”, who was the driving force. He had more than 80 patents on his designs and they produced a small number pieces. The “Old Man’s” wife handled the office. There were two sons. One handled sales (#2 son) and one handled the factory with his father (#1 son). His wife also helped with the office. Then one day, with no warning, the Father had a stroke and was no longer able to work. The Father’s wife had to stop working to take care of the Father. Now the sons are running the company with the Patriarch and the Patriarch’s Wife no longer involved. Very challenging, even devastating. They had one major lower quality customer (A Hardware chain) that carried the company. A few special customers like Spyderco and their normal consumer direct line. Then “The Rains came”. In one year, the Father passed away. The Mother passed away. #1 son had a stroke, and #1’s son’s wife passed away. Now the Grandson is running the factory and he really wasn’t ready. Then the main Hardware chain found a less expensive supplier. The family was devastated. We brought the Grandson to our factory in Golden to try to get him better trained and brought into the 21st Century manufacturing. Ir has been a long road and they are beginning to get back on track which pleases us and we’re helping…” https://forum.spyderco.com/viewtopic.php?p=1647803#p1647803
This is what I always loved in Spyderco and the Glesser family: the way they take care of their friends and how faithful they are in friendship.
This new Sprint C60 got his blade made of CPM Cruwear. This is a wonderful steel. Just click on the link to see all my articles about it but, really, this is a steel which is hard to stain, very hard to chip and very toothy even when strop. It is a tough alloy.
CPM Cruwear has been a benediction on thin pointy thin models like the SpydercoMillie and Paramilitary bringing strength to their tapered blade. It also found on Benchmade Adamas and Shaman Sprint Runs both hard users with a lot of lateral strength.
Looking at the C60 new edition, we got a relatively thick blade. It sturdy. You feel it is a blade you could use to pry something without second thought. You would use that pointy blade to open a paint pot or pry letterbox. It is stepping on the Adamas hardcore class but in a thinner package.
That’s interesting because “Mas”, as a cop, has designed a tool with Law Enforcement Officers in his mind knowing how they use their knives on patrol for many more things than just cutting. They even use knives as screwdrivers, prybars or ID plate scrappers. It is the same reflection I had about the Tatanka: a thick folder destined to be used hard and dirty even when applying lateral forces.
Back to my 2022 C60: its factory edge was sharp out of the box but it could not cut through a plastic bottle but. This is a pure geometry issue: a thick saber ground blade cannot perform like an Opinel blade. For better performance, reprofiling is mandatory and diamond (Spyderco Stuff 2) was used because CPM Cruwear loves diamonds even if it takes a lot of time to do it right without any backstand.
BTW CPM Cruwear is not easy on the Patina in my book. (Link provided) I use this speciality alloy since the Military in Cruwear with zero pitting on the blade. To avoid that, my knives are often used in the kitchen and grease is always there to coat their blade.
Duck is a fat meat… So we got that thick edge tough narrow blade…. Not my cup of tea actually. I prefer leaf shape full flat grind or razor sharp hollow ground wharncliffe. So I need to reprofile it and it will take some patience.
Also that Massad Ayoob design proposes no choil. I love choils since Sal Glesser has explained he was inspired by boot knives: you hold your folding knife by the blade and it is a great security for your fingers. The absence of choil is not an absence of hot spots…
As you can notice the blade falls gently on the index finger when unlocked. The action is smooth but that guard with beveled G10 and sharp liners is problematic. More on this later. One thing which is remarquable is the choice of the lock. ” It has a notably strong lock-back with a David Boye style release lever that helps ensure safe lock-up. “ The lock-back allow also a very thin handle construction. Thinness means easy for a waistband carry. This is very thoughtful.
Smooth action thanks to bronze washers ? Nope. Who needs washers ? Actually there is no washer. No bronze, no nylon: nothing. The Moki factory is known for that washerless high tolerance constructions and the liners are providing some kind of “integrated washers”. Very impressive !
Without washers, well, there is no lateral play. The knife feels rock solid. And it is all screw construction with a steel backspace.
Quoting Massad Ayoob: “The handle-to-blade angle puts much more force behind a slash as well as a stab. Instead of the blade “skimming” over the target as it hits hard resistance such as bone, the 90 degree angle of the blade when held in reverse grip (and KEPT there by a handle shape that allows the thumb to lock it at that angle) the C60 is more likely to shear directly through whatever resistance it encounters. Because of the design features, something very similar happens with a slash from the conventional saber or pekal grasp.”
The handle got bevelled grey G10 slabs. G-10 has been used instead of the previous 2001 aluminium. Mas actually said on “Glocktalk” that he preferred the G-10 handles to the original handle. Personnaly I prefer the original handle better as it was providing a pocket friendly solution. A smooth handle suits me but I understand it won’t suit from a “tactical” point of view. To smooth it a bit, I have sanded mine (with 400 grit) especially under the clip to avoid any pocket destruction by filing them with such a coarse G-10. Oh, there is another visible improvement of that Sprint Run: the possibility to switch the position of the clip: left or right, tip up or tip down. Nice touch.
To quote Massad Ayoob: “As to the tip-down carry: I’m one of those early Spyderco fans whom Sal calls “Clipiteers,” who started their Spyderco experience with the original Police model, learned to open it with a pinch-snap, and discovered we could win bets beating guys with bali-songs and even “automatic knives” in opening speed. The pinch snap uses the gross motor movement of the closed hand instead of the more fine-motor skill of using the thumb to open the blade via the original design intent of the “Spyder-hole.
I’m one of Sal’s early “Clipiteers” who liked the speed of a momentum pinch-snap opening, and remain a big fan of tip-down carry for that reason. Wouldn’t hurt if Sal came up with a design offering the choice, it was already set up for ambi and more choices for the user is good. Plain edge, serrated edge, or a bit of each is entirely up to Sal. In the first production run, on my end the plain edge far outsold the serrated, but Sal of course has a better handle on sales nationwide than I do. Sal’s call, of course. I’m hoping the sprint run happens. Thanks to all who requested it from Sal!”
There I will be agree with Massad Ayoob. Actually it seems like back in 2000, Mas was turned into a “Spyderdrop” fan and a Clipiteer like advertised on the original Military C36. It’s a fast way to deploy a blade even quicker than a switchblade or automatic knife. You just grab your knife inside the pocket by the opening hole and by a gentle flick of the wrist, you open it. The spyderdrop just works great on the C36 as it was a liner lock with a big opening Hole. Once passed the detent ball nothing prevents the blade to open. Certainly Sal Glesser demo caught the eyes of Massad Ayoob who was much more a fan of a fiexed blade quick draw as on its previous design: the Razeoback. On a backlock folder, though, there is a constant pressure from the spring and no need of a detent ball per se. You need two things to get an easy spyderdrop: a heavier handle for the momentum and, a speciality of the C60 design: a short opening arc.
Something important to keep in mind, the 2001 version was a lower rider. Its clip was much higher on the handle making it disappearing in the pocket. this is less the case with the 2022 Sprint Run.
So, as the C36 is a game to open with just a flick of the major finger, thanks to its shorter opening arc and its negative angle. It is fast. The jimping on the blade needs a little filing as it could wear the pocket, but the opening hole and the big hump, the stainless steel spacer assing more momentum ease the spyderdrop. They are fast and reliable. The negative angle and its shorter opening arc could make it the queen of spyderdropping.
Handle wise, I have found the steel liners edges much too sharp. I have used some diamond file to smooth them but for a knife that price, it hurts… the fingers too. There is a real hot spot near the axis. In case of hard push cut the blade jimping is also another hot spot. It hurts that skin between the thumb and the pointer named the “first web space”. Again this is not a tool for bushcrafters. The C60 is a slick flat knife destined to LEO. It needs to get in action very fast. The Police 4 is in the same category of knife. Flat, easy to carry, a little on the heavy side and solid but not the best for long cutting chore unless personal customization involving a file and some sandpaper…
I have changed the spoon clip to a deep carry one and notice the screws are not torx but crosstip. Very old school ! Just for those who want a taste of that Golden Era at the turn of the Millenium. The mark on the handle came from me sanding under the clip in tip up carry, which was not the best way to carry it. Look at the shape of the C60:
There is Banana shape and a curve which is great when carried tip down inside my right front pocket. It leave a lot of place.
With a depp carry clip, you can notice only the “guard” is visible. It is very easy to reach the opening hole for a spyderdrop.
The mid lockback (with that wonderful old school Boye Dent) of the C60 is beefy even if thinner than a beefy liner lock, compression lock or beefy even integral lock, and is one of the sturdier locks ever designed. This one was ranked high on Spyderco’s standarts back in 2001. The original C60 lock was already rated as “hard use”. The 2022 Sprint Run should be rated as “Martial Blade Craft” level, the strongest in the Spyderco line thanks to their Constant Quality Improvement. Again even with some “rock lock” or “vertical play” only felt when cutting on a board, backlocks are really hard to beat in term of pure strength, often the handle will break before the lock as shown on some tests made by Blade HQ: https://youtu.be/ERxHUXAFVs4
Conclusion: this is a cutting tool oriented Self Defense, with fast deployment and sturdy blade and mechanism. It is not the best cutter, not the best ergos for long works without gloves even if it shine for quick response and tactical needs. I have read some users are using Massad Ayoob to filet some fish. In my book a filet knife is thin… Also I have found some hunters have used their C60 on games for skinning purpose. That knife is really not design for that but why not ? The hand is mightier than the tool.
For me the C60 is made to work hard anyway. It got a very sturdy penetrating blade which can find a lot of utility even for light prying. Also CPM Cruwear is tougher than VG10 (the 2001 version).
But more important, this Massad Ayoob folder reborn is also a nice symbol of trust between the Moki factory in Japan and the Golden factory in the USA. A trust which goes beyond continent, beyond civilisation. This “scratch my back, I’ll scratch yours” involvement of the Glesser Family toward the Japan Family is a proof of their generosity toward fellow knifemakers and end line users. This is precious in those volatile times. Sal Glesser knows how to create “matter separators” but he is also able to build very solid bridges too.
After using the Kapara all this summer I have decided to go the opposite way with a straight edge and flat handle ! And having a lot of fun with my Yojimbo2, I have decided to beat that dead horse again: “This knife has been designed for Self Defense, It would not be a great EDC, especially in the kitchen.”
All famous SD tools were issued from agricultural items, from nunchakus to kerambits and since when straight sharp knives are not useful in the kitchen ? So let’s broad the specter of usage of the good old Yo2.
The handle is flat and broad. This is a real plus for indexing the knife but also to hold it by pivot area between the thum and the index. A very commode grip when carving pumpkins or just cutting on a board.
There is a hump on the handle’s back which fills the palm of the hand making the grip secured even with very wet hands. You can notice the same shape on the Kapara‘s handle. In fact despite being flat the handle is almost all in curves and looking at the Yo2, only the very edge is straight.
The blade is short thick but broad and keen. It is shorter than a Kapara’s blade which got almost the same handle length. But this a very powerful blade, able to withstand forceful pushcuts. For that matter I have rounded the spine on mine. Personal preferences since my first Sebenza.
You can put all your weight on the spine to cut right through any matters. The wide blade goes through like in butter. Also the Yojimbo2’s blade got a certain heft. It is thick on the spinde and feels hefty hence the sensation of power when cutting. This is not minor in the pleasure of using your tool. Thank kind of weight behind the spine makes it ooze of power.
The high blade can adopt the thin geometry needed for easy slices into cherry tomatoes, a simple chore which can be tricky and is an excellent test for sharpness. Tomatoe’s skin can be tricky and rough or razor edges are their best nemesis. I also heard a lot: “The tip could be fragile.”
For the record, the Snody/Janich’s Ronin and first Yojimbo were much more thin on their tip. The Ronin being made of VG10, I had managed to break it.
To eliminate any risk I have chosen a stronger alloy on my Yojimbo2: CPM M4 and so far the needle tip is as pointy as Day One.
For that kind of jar, the easiest way to open it is by making a hole right in the middle of its cap. When I want to use the jar again, I will use more force or if stuck a twist of a leatherman’s flat screwdriver under it lips to balance the pressure. With the Yo2, I have been able to remove staples in wood planks and even drill into hard wood which mean torsions for the drilling. No certain I would try that with S90V but S30V heat treated in Golden is strong enough for knife shores. The CPM M4 used here is just peace of mind even on thin sharp knives. Gayle Bradley has also chosen that steel for the exact same reason: strength. But a knife will never replace a screwdriver apart perhaps for the infamous Ed Schempp’s Tuff.
Once broken, I have been able to regrind the tip of the Ronin which has been one of my favorite big little fixed blade.
The blade shape allow the Yojimbo2 to cut on a board but also the Wharncliff shape protect the edge from any contact with plate’s ceramic. Only the pointy tip get in contact ! It will make deep scars in your wooden planks if you are not careful.
Wharncliffs are great for whittling and also rope/string cutting. There is no belly for the cut material to run away. They will be less handy as skinning knife where belly blades are mandatory.
The absence of real choil is not an issue. The place of the thumb on the “hump” gives a lot of controlled power. As you can notice the flat handle around the pivot is wide and this is a real nice place to land your thumb. So it is great for indexingand always knowing where the edge is. On the opposite concept side of the cutlery world, an Opinel (great knife by the way) with its rounded handle need a double check to know where the edge is as the handle can turn in your grip). So this “thumb landing strip” around the pivot which is especially wide on Yo2 is a great asset for using this SD knife as an EDC tool. (You can also notice than despite a single spot, I have not been able to get a real patina on that CPM M4 blade.)
In conclusion the Yo2 is really a great workhorse and should not be restricted to Martial Bladecraft. Also the more you use your knife in everyday life and the more your build your motor skills about deploying and closing the blade. The heft of the blade helps a lot for that. Use your Yojimbos hard and you will be surprised how they can handle any tasks !
The YO2 in the words of Michael Janich: “When I designed the blade for the Yo2, I took a lot of inspiration from the Manix2, both because I like the way it cuts and because, as a Golden-made product, its manufacture respresented a known core competency for Spyderco. Combining a partial hollow grind with a thick, strong spine provides a great balance of edge geometry and strength. Moving the point up towards the blade’s centerline moves it toward the thicker part of the blade; however, if the hollow grind runs parallel to the edge all the way to the point, the resulting point thickness is functionally the same as what you get with a wharncliffe.
The wharncliffe blade excels at cutting because it cuts with full power all the way to the tip. An acutely angled tip also provides superior penetration with minimal effort.
From a utility standpoint, the Yo2’s tip is analogous to an X-Acto knife and is excellent for detail work. The heel of the blade, closer to the handle, is extremely strong and more than capable of tackling most cutting chores for which knives are appropriate tools. In general, if you focus on using the part of the blade that is most appropriate to the task at hand, you can perform a wide range of cutting chores without a problem.
Having designed several wharncliffe blades now, I have also been privy to the warranty repair claims concerning these blades. In all honesty, broken tips are rare. The ones that do come in typically come with a story that begins “I dropped my knife on concrete/a hard tile floor….” or “I know I shouldn’t pry with a knife, but…”
Like a box cutter, a wharncliffe cuts with both power and finesse because of its straight edge. If your style of utility knife use actually focuses on cutting, it will serve you well. If your utility knife use focuses on prying, digging, or using your knife as a jack handle, buy a knife that is better suited to that type of use–and don’t expect it to cut very well…
NemoKnivesReview 