Category Archives: Review

Blade4sell Titanium Clips – Deep Carry Alternative.

20190220_1553438892665025613971523.jpg

Victim of his own success Blade4sell have taken almost 6 months to send to me two titanium clips. But again the perfection is at the rendez vous.
I have been able to use the original screws on the Police but I had 3 sets of screws (one black) provided with the two clips.
As you can notice the clips got that parallel lip at the tip which makes them less prone to scratch furniture or car paints.  It goes easy in and out of the pocket. Nothing catches.
Let’s hope Blade4sell will be able to hire soon to honor their orders faster. But they are very honest and were OK to refund me. It’s good to see good artisan standing behind their production and helping their overseas customers. Highly recommended.

20190220_1553406217393534049808913.jpg

You can notice how the screw flushes with the clip. Nothing to wear your pockets.

20190220_1601093038235236797790022.jpg

It works great on the Police and one The Paramillie.

20190220_1601481209879352237357687.jpg

The Paramillie can be open with a finger flip when the Police is spyderdropped.

20190220_16015461930904098059127.jpg

It is almost invisible and nothing telegraphes the size of that folder: very convenient.
Like on my Millie, it helps a lot for big folders.

20190220_1553534864525016576944791.jpg

Spyderco Police C07GP4 – The Steel Cheetah.

“The original Police model was a response to a request from Police for a Mariner with a point. I saw that as an opportunity to create a new design that was closer to what I personally liked. I thought to call it “LaSalle”, but in the end, i pushed the ego out and called it the Police model. As the design evolved, details changed and from those changes I was able to see what I didn’t like and went from there. As you said, it was decades in the development.
Sal Glesser

I remember one of the very first advertising of the Clip It collection of Spyderco. The Police was presented in its stainless handle serrated edge version of that time (80’s…) and it was written something like: “Pure Performance” … The cheetah is a good example of incredible fast and lean animal and as this knife, it is thin and light and totally performance oriented.

Nouveau document 2019-02-19 17.02.25_1
The venerable Police model designed by Sal Glesser is at its 4th version. Born in the early 80’s it is now part of Spyderco’s Legendary knives. I remember seeing some models with “Pride Integrity and Guts” engraved on their blade: they were the very first. This knife can be spotted in so many Hollywood movies, mostly in the hands of bad guys and even in the excellent classical Spike Jonze’s musical video for the Beastie Boys: Sabotage ! The stainless serrated hollow ground blade was really catching the lights hence it’s success for a dramatic entry in various films !

Nouveau document 2019-02-19 17.02.25_2

I was never a real fan of the first 3 versions of the Police models even if I recognized it has a valuable tool. In my book, the Tantaka was the true heir of those years. The fourth version caught my eye as it was promoting a new steel the KC390.

Many times I had noticed some vertical play on “Made In Japan” folders from Spyderco and decided to buy one if only I could test it before.
But this one came from a Massdrop sale and I was very happy to get one with zero blade play in any direction. Mine feels solid and knowing how strong a good backlock is, this flat long folder is really impressive. So it was about time to review this venerable classic folder which is delivered with a plain edge only and K390 … but why choosing a “staining “steel high performance steel when the Police as always been serrated and stainless ?

Nouveau document 2019-02-19 17.02.25_4

“We make quite a few designs for the Law Enforcement market at this time, so the design for Police use is (not?) necessarily the case anymore, like it was in 1984. I designed the Police 4 to include what I would like in a knife, more than what a LEO might like. It’s still a kissing cousin, and large for most people. I widened the blade, enlarged the hole and selected a steel that I like to use. The design’s success in the marketplace is unknown at this time. But I get to have one. ” Sal Glesser on Spyderco Forums in 2016.

 

Also the blade is perfectly centered. The construction is the same as my Endura and Delica, sandwiching the steel liners with the handle material. Here it’s black G10 on skeletonized liners: the knife doesn’t feel heavy at all but very well balanced and fast in the hands.

The long flat blade is still intimidating while deployed. Let’s see some comparaison pictures. Notice the black could of forming patina in the middle.

Here with Ed Schempp’s Bowie which is one of the best blade/handle ratio folder in the Spyderco collection, full flat ground versus high saber flat ground. The Bowie has been convexed to my taste. The large choil on the police is confortable though.

Here compared to the wonderful Manly Peak, another thin backlock lightsaber. The Manly has not been really convexed; it is really thin ground ! With its S90V blade, better edge/handle ratio and zero blade play construction, it is a real contender to the fourth version of the Police.

They share the same thin stock blade. The Manly (on the right) is even pushing the envelop a little further by proposing hidden nested liners for the same handle thickness.

It is obvious the Delica and the Police are sharing the same DNA even if the Delica main difference is the absence of real choil to choke up the blade. I have both in tip down carry position for easy spyderdrops opening. Here is the Knifecenter special edition of the Delica.

The Delica still got the Boy indentation on the lock when the Police is now leaner. This raffinement has never made a real difference to me. The spring on the Police model is quite strong actually so no worry about unlocking it will chocking the handle.

Here you can notice how longer the Millie handle is compared to the Police. Also the belly of the Millie is much more pronounced. I think now the Police 4 has been also designed to be used while wearing gloves (one of the Military plusses). Both finger holes are equally wide with a very pronounced blade’s hump. The Police’s choil is even wider than the Millie’s !

Also the Military blade is thicker as is its handle. The Police is perhaps more “urban” oriented: it is a large folder easy to wear with any suits.

Here you can admire how the Police is a steel cheetah: lean and mean. The clip was mounted that way and I was tempted to add a deep carry clip but eventually, the spyderdrop is the more handy way to open that large folder so the clip is now mounted near the pivot.

This thin blade enhanced by a great steel (K390) is pushing that venerable model to new heights. We are far from the serrated hollow ground model of the 80’s which was respecting special requirements from the LEO. “It was designed to have an as large as possible blade built into a thin, equally sized handle. Because of this, Save and Serve professionals continue buying the Police Model as an essential tool for their trade.”
From Spydiwiki.

It is a flat and elegant design with a very clever purpose: to insert easily the knife inside the pocket when tip down carried.

Some sanding was required to get the handle even smoother for easier pocketing.
Aerodynamism is one thing, pocketodynamism is another.

Again, never breath that dust it is toxic for your lungs.
“”The benefits of G-10 as a handle material are many. It can support a building, be drilled and sawed. It’s doesn’t retain heat or cold, shuns chemicals, discoloration and peeling. “

And that makes it long folder which can easily be pocketed. Carried tip down, the handle shape pushes my wallet away  when inserted and allow very quick and positive spyderdrop openings. They are four positions to mount the clip on the Police since the 3rd version in 2008.

Next step, with some diamonds, it was time to reprofile the blade to a Manly Peak level and to thin the edge by “deshouldering”. Not an easy task as K390 is a bear to sharpen.

The occasion to picture the blade before to scratch it.

The light reflections on the blade shows it has already started a mild patina while being stored.

K390 develops naturally a beautiful patina like storm clouds. Here is the Police with my Pingo and Urban.

Funny how it is hard to catch on photography but the Urban got the convexed grind I want to achieve for the Police. Both knives are signed by Sal Glesser’s logo.

I have check how the patina was easy to remove before going back to sharpening.

Here you can see the dust formed by the diamonds of a DC4.
K390 is a very wear resistant steel…

 


Here what Phil Wilson said about it in the Spyderco Forums:
“I have been using K390 from the start ever since it was introduced by Bohler and I got some small samples to try. A bit of history is that it is the European version of CPM 10V but not the exact chemistry (about 1% less V plus small addition of a few others). That is because the CPM 10V chemistry was protected by patent at the time. If you check the K390 data sheet it claims that the bit less V gives K 390 a little boost in impact toughness. It also can be heat treated at a lower temp. than 10v. So it is pretty much the same as the A11 grade but different in a few small details. It is hard to tell the difference between CPM 10v and BU K390 in the real world in my experience. I like both grades and they are the base line (along with Vanadius 10 and K294) from which I measure wear resistance. The 5 chrome is there to make them all air hardening among other things and does not contribute much to corrosion resistance. It is going to make a killer knife in the new offering and be another classic. Phil”

So slowly it is deshouldered but I will be obliged to go back to the blade later. It is, for me, like painting a ceiling… I always come back for another layer… 😉

All right, the performance are already promising. The plastic Bottle Butt is as thick as the blade itself but it has been able to got through it right in the middle. Again, zero blade play on that huge folder: very happy.  Same punition for the bottle neck. The Police shows how powerful it is and that the recipe of “thin blade + super steel” is always a winner for high performance knives. More to come, as this one is going to be user !

20190220_1612574854410471853068372.jpg

I have mounted a deep carry clip from Blade4sell.

20190220_1553438892665025613971523.jpg

20190220_1553534864525016576944791.jpg

Manly Wasp – Round 2 – The Captain’s Marvel !

20190204_170519-01567064103141033897.jpeg

Long story short: opening the Manly WASP with two hands is tedious compared to all one hand opening knives available but the pleasure to use such an agressive cutter worst it ! So let’s be short !

20190204_170419-01339939121031575126.jpeg

Slide #2: I have gently rounded the shoulder of the edge making it even thinner: no chipping or rolling. It tells a lot about the quality of the Bulgarian heat treatment !

20190119_083527-24452096996105235427.jpeg

Slide #3: The cutting action is absolutely accurate and it slips gently in any material it is confronted to. Peeling an apple is a child play. Also the hard plastic is no challenge for the thin hard WASP’s edge.

received_1207570476085585-015756676205041178580.jpeg

It is just fun to “test” that little folder on different chores !! What else ? It is not threatening so even sheeples can borrow it. Also the deep carry clip does wonder.

20190203_163259-014029208996630664723.jpeg

I have also noticed how the edge is resilient to the plate’s ceramic ! Repeated hard contact on the plate did not affect the sharpness: this is a first for me.

All in all the knife is slow in its opening with two hands but once ready to cut, it is a marvel ! It can bring a smile on your face when you see how easily it can separate matters. It is a keeper.
BTW mine seems to be the 2019 version with no contact between the blade and the spring when closed.

received_323842828245075-018141548494504760620.jpeg

 

Benchmade 200 Puukko – Call me Snake.

This is the first Benchmade’s review for a long time. Why ? Not because of the quality of Les De Asis company’s products but because I was not really excited by their production in the last decade after a huge love with their AFCK back in 90’s, and also with Nimravus and all those blades in M2HS which is a tungsten high speed steel, the granddaddy of CPM M4.
I still got a AFCK in M2HSS and browsing that blog, you will find it here.

So here we go, two words has caught my attention on that new Benchmade: Puukko and CPM3V.

“CPM 3V is a high toughness, wear-resistant tool steel made by the Crucible Particle Metallurgy process. It is designed to provide maximum resistance to breakage and chipping in a high wear-resistance steel. It offers impact resistance greater than A2, D2, Cru-Wear, or CPM M4, approaching the levels provided by S7 and other shock resistant grades. CPM 3V is intended to be used at 58/60 HRC in applications where chronic breakage and chipping are encountered in other tool steels, but where the wear properties of a high alloy steel are required.” Source Crucible.

COMPOSITION
C Mn Si Cr Mo V
0.80 0.30 1.00 7.50 1.30 2.75

To quote my friend Max Wedge:
“3V loses 1/3 of the toughness going from 58hrc to 60 hrc (still 1/3 above A2 at 60 hrc, and A2 is indestructible… almost). Both 4V and Cruware start to shine around 60-62 Hrc… so, 3V for choppers, 4V or Cruware for slicers, Cruware having best corrosion resistance ( trait appreciated by soldiers & foresters)”

So this tough short blade made of chopper steel is at a very good bargain !! Let see what it is all about.

The leather sheath is beautiful even (if there is a loop in the stitching… I will upgrade it into a kydex for pocket carry.) and cleverly designed as a dangler. You can remove the loop to transform it into a classical sheath.
There is a place for sparkling rod in the Bushcraft fashion. I don’t care about carry a knife of that size attached to my belt. I prefer to have it inside my pocket or my bag.

The blade is an eye candy for some reason it reminds me the small SOG Seal Pup knife with no false edge but that’s me… Is this a Puukko ?

That handle is made in some kinf of thermorun… but it is rubberized Santoprene is a soft, non-hygroscopic elastomer which exhibits excellent surface appearance, a durable soft-touch feel, excellent colorability and excellent “processability”… made by Exxon.

It is made from underground forgotten dinosaurs and jurassic biomass aka “petroleum” hence the look of scales on it ?  Because that handle looks like some sort of snake or cold blood creature. I love it.

Now is this a scandi ground blade ? Nope. There is a secondary bevel. Is the knife sharp ? Yep, very sharp but could be better. Later/soon on that.

It is a hidden tang construction and you can see the steel in the lanyard hole. This knife is solid as CPM3V is really tough !!
Hidden tang are great when you work in cold weather, protecting your hand from a frozen steel.

That blade is short but handy: it asks to be used hard like… Snake Plissken’s hard actually ! Because 3V is magic in toughness ! 😀

Compared to a Mora or the Urban Hunter (from Pekka Tuominen) the Benchmade 200 stands its ground.

Here are two vision of CPM3V industrial use. Ed Schempp Spyderco Tuff is pure business. So that BM200 should be even tougher as a fixed blade.

Teamed with a Manly Wasp, you got a great combo.


But a puukko (in my book) needs a thinner edge and it is time to scratch that blade to de-shoulder all that. Diamonds do scratches but then scratches will be polished later. Thinner convexed edge is destin to go deep and get twisted; this is a tough steel.

Diamonds, ceramic and leather. Who needs more ?  CPM 3V is really like chewing gum you need abrasive medium to form that convex edge.

A some compound with the leather stropping is mandatory to erase those scratches

See ? Now it is convexed and will be smooth on whittling wood. No worry for that edge stability again 3V is perfect for that use.

Standing next my Serrata which is my only naturally serrated knife.

So now, I just need some white ceramic to keep it sharp and some stropping. It is ready for testing. The Puukko shape is more for me a “Coutelas de Rahan” shape actually (French people will understand but here is the link: Rahan in Wikipedia.
making this little tough knife very appealing to bring it everywhere.
Everywhere is a good point to start. 😉

20190122_092816-017697724220268595202.jpeg

Bulgarian Rhapsody – Manly Wasp in S90V

In winter we all need vitamin C, after a long wait I get my shot !!
My Viking friend Dan Sharpe has been the one who has injected me the Manly Virus. First one was the Manly Peak, the Comrade…  And with my Welsh pal Wayne, both were keen to have the chance to carry their Manly knives legally in the UK: three inches blade, no lock and a deep carry clip. By luck some people of Manly were reading our conversation on our Facebook Group and voilà: the WASP was born.
But our Bulgarian friends were even more clever than this… Let see why. First picture, please ?

Here is my Manly family. The Wasp is the shorter. All are in S90V and with a very thin edge.

The stout WASP is showing proudly is wide belly. This is a powerful combinaison: belly and ultra thin edge.

The cleverness of having the Wasp steel liners hidden inside the G10. The Comrade got thicker G10 slabs too keeping is role of hardchore slipjoint.
You got the best tech of the Peak and the Comrade in a compact tool.

Thin edge is evident on simple tasks like peeling a fruit. Thos Manly knives are razor sharp out of the box and their S90V is very well het treated: no chipping and no bending. I have used hard my WASP in plates and the ceramic was not able to mark the blade. This is really amazing.

I’m starting to think that Manly S90V is as tough as 3V !! (Benchmade CPM 3V Pukko pictured)

The WASP is not threatening at all on a table. It can be used in a restaurant or amount non knives friends with no problem. I know, I only got compliment about it.

Yes, that wide thin belly edge is really powerful. It goes deep and steady in any material. Of course the slip joint mechanism is the same as the Comrade with zero play and 4 steps to avoid closing on the finger. Also the guard is an excellent protection. You really will need your two hands to open it.

I’m not crazy about the “look” of the screw but this is consistent in all my Manly Family. It’s really “cosmetic” but I think this knife desserve a more beautiful screw. No big deal. The Orange G10 is perfect and I won’t need to sand it. The G10 on the Comrade was more aggressive… The ergonomy is absolutly great for a short knife with no lock. So far it is a joy to use. There is no “square” feel like on the comrade. It is really close to the Peak in term of flat handle.

Here is a close up on the wonderful deep carry clip, the same which is found on the Peak. It works great.
The Comrade clip is the only “proud” clipped of the family. But again it is logic with the way the Comrade has been design as a slip joint tank for outdoors applications.
The Wasp is more on the stealth side but its belly near the pivot makes it really powerful in pushcuts I do when cutting wood to make a pole. More to come after some use,  but this one is ready for travelling is Danemark !
Anyway all those Manly have thin edge, great action, and wonderfully heat treated S90V blade. The Wasp is the proud son of the Comrade and the Peak. Now I hope a 3 inches version of the Peak will be proposed.

Flytanium on Cruwear PM2 – a sweet customization

Disassembling the Cruwear Knifecenter edition has been a child play once I have found how to use some pliers to keep some rounds spacers from turning by gripping them.

Eventually, the Flytanium scales are perfectly adjusted. No surprises at all.
The action is as smooth as before, no worry.

The sweet point of balance is a little back further.

I have ordered deeper clips for Xmas but the OEM works great !

The feel is heftier and softer. It works well with the PM design. It gives some full metal signature to a usually light design. This scales exists also in brass and copper. titanium sounded perfect and it is under the thumb. The stonewashed finish is absolutely beautiful !

 

20181113_1711058057864771192678199.jpg

The original weight was 111 grammes, so it is now 28 grammes heavier.

For those who want to know how I have made that patina: here the link.

A star is born! A look at the Spyderco Alcyone by JD

At the end of the 2017 Spyderco meet in Amsterdam we received the Spyderco Polestar. A year later, at the the 2018 edition of this event, we were presented with its smaller brother the Alcyone. Nemo gave his example to Pascal who wrote and excellent review of the name of the knife, and his experiences with the it during his use.  Here I will present my experiences with this knife.

I have reviewed the Polestar before.  As the Alcyone and the Polestar are made of the same material and share many features, here I will focus on the things that I noticed to be different.

To start with the biggest and most obvious difference: the size! The Alcyone comes with a 7,4cm (2,9inch) blade where the Polestar’s is 8,4cm (3,3inc). This makes it more edc friendly for me. I have carried it in the waistband comfortably for a month at the moment of writing.

The design is quintessential Spyderco. Put is next to other knives that have been designed by Spyderco’s founder Sal Glesser, and the family resemblance is unmistakeable. Sal puts a lot of attention into designing knives that work great in the hand, and he definitely succeeded with the design of the Alcyone. It feels pleasant in the hand and offers a lot of control while cutting. Both in normal edge-out as well as edge-in grips, like when you are pealing something. Good stuff!

New the edge on my example was not very good. It could not push cut receipt paper and only slice it with difficulty. So it needed to be resharpened before I could carry and use it. The edge was also thicker that I liked. Edges on new production knives often are. (Though overall the edges on new Spyderco’s have become a lot better at this in recent years.) So I took out the well used extra course DMT Diamond hone and set to work. After the thinning I refined it on the diamond side on the Fallkniven DC4. I was not hard to put a head hair splitting edge on the knife this way. Now it cuts very well! In use the BD1 steel blade has proven to hold and edge well and be easy to keep sharp.

The Alcyone had a noticeably stiffer action out on the box than the Polestar. The Polestar could be middle-finger-flicked from the get-go, not so the Alcyone. Opening the blade with the thump though was easy to do. Putting a little nano oil on the pivot and the detent ball made it a little smoother. The biggest difference though was made when I unscrewed and re-tightened the pivot and handle screws. After I did that the knife became noticeably smoother and it became possible to middle-finger-flick the knife. Which is a lot of fun!

I also took the knife apart. Not something I often do but I was curious to see what for a effect it would have on the smoothness, and how difficult it would be to do. It proved to be an easy operation but did not have more effect on the smoothness than releasing and re-tightening the screws had had.

The Alcyone has proven to be and excellent edc in the month that I carried and used it. A great design that just needed a little t.l.c. to shine at its full brightness!

Manix 2 Lockback C101MBGP2 — Native 5.2 Grand Daddy !

This version of the Manix is equipped with one of the strongest lock ever produce by Spyderco in a light package. We are touching here a “Knife of Excellence” and one of the best Eric Glesser’s design. Sadly it is discontinuited in 2019 but this is also the last chance for you to get an absolute fabulous workhorse at a great price. Mine came for 99 dollars…

Can you imagine better bargain for an all made American knife of high performance ?

The operation of the lock goes deep in the notch while unlocking.
And the G10 is factory smoothed (I have used 800 grid to get it even smoother later)  and the action is perfect. Lockback lovers can only fall deeply in love with this one.

The pivot screws are huge even compare hardchore folders like the Yojimbo2 and it is only a part of the enhanced strength of this version as also the blade is a little thicker than normal Manix 2 version.

Here the blade thickness is 0.145″ (3.7 millimeters)
against the usual Manix  thickness of 0.125″ (3.2 mm) !!
Half a millimeter in black thickness is a simple way to have a stronger blade.

G10 is extraordinarily strong and with such thick scales this version of the Manix do not need any steel liners which can rust or get dirty too easily, especially if they are skeletonized !! So this thick G10 use is a great plus in my book: the Manix 2 Lockback is easy to clean and easy to check for grim … It’s a plus for hunters which use their knives in the fiels were hair and blood can get inside the handle. I should also mention than this one, like all my Native 5 got ZERO vertical play and his so smooth it is fun to flick open.
Also don’t forget you can make stealth fixed blade (even Fred Perrin made Balisong’s blade and handles) only with G10: this is a real solid material.
Here the blade is made of S30V. Spyderco knows how to heat treat than steel so this is a no brainer.

The plain stell back space and thick G10 slabs of the handle are just wonderful to avoid blisters. This is where you recognized a tool you can use hard without hand sore.
The balance of the knife is also improved with this full G10 construction, the sweet point is just under the second horn of the handle not the one of the choil, the other further back.
Well it is a lightweight linerless handle construction, fine-textured G10 scales and a stainless steel backspacer ! There is no lateral movement. You know my favorite expression “built like a tank“… so here we go !

The tolerance and the QC are really high. The action is smooth and the blade locks with a firm “KLAK!!”

As you can see, as much as I love the Shaman design, this Manix 2 is the true daddy of the linerless G10 version of the Native. Again a very solid and light EDC.
In both the ergonomy is at its zenith: large choil, no jimping madness the handle spouses your palm.

Both are made in Golden, Colorado, a plant with now very high tolerance and excellent quality control: the blade is perfectly centered.

So what do you got here ? A incredibly solid and versatile outdoors knife ! Easy to clean and maintain, rock strong locking system and of course the full flat ground leaf shape blade which is a must in cutting control. Strong lock, stronger blade, great ergos… This is really a shame this knife is discontinuited …
Perhaps its reincarnation can be found in the Spyderco Chief found in this review from April 2021.

https://nemoknivesreview.com/2021/04/01/native-chief-rex-45-sprint-run-c244gbore-the-joker/

20210401_130822-01.jpeg

“We were sanding in the rain – like we invented sanding
There’s a light in the sky from a million street lights
And we danced all the steps from all those old time movies
Rolling down the hill with laughing hearts…”