Bulgarian Rhapsody – Manly Wasp in S90V

In winter we all need vitamin C, after a long wait I get my shot !!
My Viking friend Dan Sharpe has been the one who has injected me the Manly Virus. First one was the Manly Peak, the Comrade…  And with my Welsh pal Wayne, both were keen to have the chance to carry their Manly knives legally in the UK: three inches blade, no lock and a deep carry clip. By luck some people of Manly were reading our conversation on our Facebook Group and voilà: the WASP was born.
But our Bulgarian friends were even more clever than this… Let see why. First picture, please ?

Here is my Manly family. The Wasp is the shorter. All are in S90V and with a very thin edge.

The stout WASP is showing proudly is wide belly. This is a powerful combinaison: belly and ultra thin edge.

The cleverness of having the Wasp steel liners hidden inside the G10. The Comrade got thicker G10 slabs too keeping is role of hardchore slipjoint.
You got the best tech of the Peak and the Comrade in a compact tool.

Thin edge is evident on simple tasks like peeling a fruit. Thos Manly knives are razor sharp out of the box and their S90V is very well het treated: no chipping and no bending. I have used hard my WASP in plates and the ceramic was not able to mark the blade. This is really amazing.

I’m starting to think that Manly S90V is as tough as 3V !! (Benchmade CPM 3V Pukko pictured)

The WASP is not threatening at all on a table. It can be used in a restaurant or amount non knives friends with no problem. I know, I only got compliment about it.

Yes, that wide thin belly edge is really powerful. It goes deep and steady in any material. Of course the slip joint mechanism is the same as the Comrade with zero play and 4 steps to avoid closing on the finger. Also the guard is an excellent protection. You really will need your two hands to open it.

I’m not crazy about the “look” of the screw but this is consistent in all my Manly Family. It’s really “cosmetic” but I think this knife desserve a more beautiful screw. No big deal. The Orange G10 is perfect and I won’t need to sand it. The G10 on the Comrade was more aggressive… The ergonomy is absolutly great for a short knife with no lock. So far it is a joy to use. There is no “square” feel like on the comrade. It is really close to the Peak in term of flat handle.

Here is a close up on the wonderful deep carry clip, the same which is found on the Peak. It works great.
The Comrade clip is the only “proud” clipped of the family. But again it is logic with the way the Comrade has been design as a slip joint tank for outdoors applications.
The Wasp is more on the stealth side but its belly near the pivot makes it really powerful in pushcuts I do when cutting wood to make a pole. More to come after some use,  but this one is ready for travelling is Danemark !
Anyway all those Manly have thin edge, great action, and wonderfully heat treated S90V blade. The Wasp is the proud son of the Comrade and the Peak. Now I hope a 3 inches version of the Peak will be proposed.

Advertisements

Tuscan Raider #2 – cheese and wine, boar, scorpion and Delica.

For now this post has only been edited on my smartphone. It’s more of a journal kind and some thoughts I wanted to share. It is the occasion also to share some pics of knives being used.

Once arrived in Tuscany one of the first duty of my Delica was to open a wooden crate.

Delica are thin bladed. Snapping the point is very easy.

The trick is not to apply leverage but simply to twist the blade. Even with a thin point you can apply a lot of torque. The crate was open easily.

The good thing with that knife is how well it is accepted by people and sheeples.

Tonight it has been borrowed a lot and ladies used it when a keen edge was requested.

Liver…

Boar and mash potatoes…

So far HAP40 is stainless from being used everyday as silverware. No patina has been spotted. It seems more resistant than CPM M4…

A delicacy from Naples.

Hard crust and soft inside. You need a very thin edge to cut all those blades of pasta’

The dog was playing with a scorpion. Nobody seems to care about it. But it was the chance for a bug picture…

Eventually the dog was alive despite annoying that poor scorpion for a very long time.

The scorpion escaped somewhere. Tuscany country life.

And as I’m writing now in the shade of the evening a mosquitoes has decided to taste my blood. Smallest animal are feeding in the biggest.

Sunday morning we will go hunting.

Tomorrow time to test the Euroedge.

Spyderco C11WDP Delica HAP40/SUS410 Pakkawood Handles, KnifeCenter Exclusive — Delicate Lady/Gentleman Folder.

20170912_120344-011509878026.jpeg If the Endura with Pekkawood handles is too big for you, there is the Delica alternative ! Again it is IMHO the best version ever made of that legendary folder. I have bought it from the Knifecenter and Howard Korn which is really proud of his exclusive version have buffed the handle to a beautiful result. The Delica is not only a shorten version of the Endura, it got a thinner blade which gives great slicing and whittling power. Again this exclusive version got the clad HAP40/SUS410 blade and it gives you a powder metalurgy high speed alloy in a very thin stock. The blade got also now more lateral strenght than pure stainless steel. On the Delica with its thinner stock, again this pure slicing wonder ! With a little time you can hone it in a true razor. wp-image-136639233 The Delica got that status of pure EDC as it is small enough to be accepted easily by sheeples. The handle adds a touch of class to this little workhorse and the special alloy blade gives more power to the “matter separator”. wp-image-325305067 This is little gem is just asking to be clipped and use. As you can notice there is no laynard hole on the version. That can be an issue for some people who use lanyard to retrieve the knife form their pocket and enhance the handle in length. It’s a matter of taste. I love lanyards on knives pictures but I don’t like them on my EDC and the Delica’handle is perfect for my hand. wp-image-149091807 I have kept the clip mounted for tip up carry, on the opposite of the Endura which I open with a Spyderdrop. But the Delica is so smooth that it can be “spyderdropped” too. wp-image-1199844387 Fit and finish are stellar and you can noticed the 0.5mm of difference in the blade’s stock. Also the full steel backspacegives a feeling of reliable and solid construction pushing the envelop in that great design. wp-image-258000545 You can notice the hole in the clip which is not in use when mounted on the knife butt compared to the Endura’s mounted on the axis clip. Again, you choose your ways they are four positions. All in all the Delica KnifeCenter’s special edition is an incredible EDC and a must for collector. It’s the kind of knife which can not leave your pocket as it’s flat, soft and precious and with the Endura it forms a true daishō (大小) !! wp-image-77962487 wp-image-1669896613 wp-image-175933760 Eventually after some carrying, I have found that tip down carry was fun. The Delica is one of the shortest Spyderco I can spyderdrop as easy and faster than my Millie. Adding a lot of fun! Also the edge once thinned can use the fact HAP40 is ready for a mini apex. I was cutting bottle my Zero Tolerance could not goo through.