Category Archives: Folders

Spyderco C81GPCW2 Paramillie CPM CruWear KnifeCenter Exclusive — Another Smooth Operator.

07/09/2018 nemosandman 3 Comments

This one will be my 5th Paramillie 2, so it is a well known plateforme but the offer was to great to pass: a CPM Cruwear blade and a smooth black G10 handle: another exclusive run from the Knifecenter which is synonym of of a great attention to detail. This sprint run is absolutely flawless and its operation is smooth like butter. You really feel in your hand one of the greatest all-terrain EDC version ever made by Spyderco, no more no less. You can also check my previous review of the Knifecenter Smooth S90V Native 5.

Perfectly centered and the grind lines just great. Golden is getting better and better through the years, it is like a real jewel of a “tactical knife”. Sal and Aric can be proud of that one !

This sprint run got smooth black G10 handles but pardon my French, I do love my edges even smoother than that. It’s really a matter of personal choice but the relation with my tools goes through the finger and the palm of my hands.

So OK It was really a matter of minutes just to round a bit the G10, as I was not obliged to sand all the slabs. So it was an minor adjustment.

The edge is already thin, So I cannot really improve it.

CPM Cruwear is great for stropping: a mirror edge is done very easily.

It is just the first try at deshouldering, the factory edge is still there and I want to test it that way.
This is not my first CPM Cruwear blade as my Grey Millie “Gandalf” was my first.

The knife operates so smoothly I have decided to carry it tip up and have installed a short deep carry clip which disappears under my ring finger once deployed. My intention is also to use the version of the Paramillie 2 hard so I want to hold it by the pivot without a clip coming in the way.
More to come soon.

En this black smooth handle reminds me that knife of my childhood: Le Couteau d’Office Nogent Carbon (Nogent carbon steel paring knife) which was the sharpest knife in the kitchen.

Capture d'écran 2018-09-21 17.17.36

Folders, Review

52100 A guilty pleasure !

23/08/2018 nemosandman 1 Comment

As you know my experience with 52100 has been enhanced with the owning of a great Paramillie 2 Sprint Run. This steel is staining and pitting just by gazing at it hence the forced patina I have done to protect the pivot’s hidden part.

But then ? After almost a year of rotation how 52100 has behaved ?

“52100 will take a very keen edge. What is often called “sticky sharp” or “a hungry edge.” said Sal in March 2018. He also said he wanted a Millie in 52100 to be used as Mountain knife.
And this is true. Like SuperBlue steel ! Those folding razor steel are flirting with lightsabers and are strong. Of course you don’t use your folders like a fixed blade as the pivot and lock can be weaker than a tang. “Batoning” (if any) with a folder should be made with the blade unlocked to avoid any stress on the locking mechanism. But lateral blade jolting inside the cutting medium is commun. I do that in plastics when It got resistance but it can happen inside a wooden knot too. So lateral strength especially on a thin pointy blade like the Millie/paramillie and Para3 is not a luxury as is also edge stability.

But the greatest joy and satisfaction in owning a 52100 blade is in its honing. This steel is made for leather stropping. In two passes it already get back to razor. Of course, I had convexed the blade to a very thin edge. In a simple 2 minutes round, after a full day of using, your knife is back to uncanny sharpness. This is so satisfying !!

The thick bottom of any plastic plastic soda bottle is my favorite test for geometry and bite as it can collapse under the force if not thin enough. The Nilakka is the queen in that game. But my full flat ground blade are all convexed to achieve powerful and controlled cuts. The thinnest of the bunch are my 72100 et CPM M4.

Ghost my CPM M4 millie has been used on various cutting duty involving food and grease as has been my 52100 Paramillie. I don’t do cutting ropes tests or anything which can be numbered, I go with the feeling. Even if I enjoy reading those tests it’s “quantity” over “quality” as a blade is 33% steel 33% heat treatment and 33% blade geometry. Cutting hard wood, looking and touching the wood’s grain and the cut fibers and how the edge behave when twisted inside is my way ad as 52100 is also used in razors: shaving sticks of hard wood is done with ease and control.

For Ed Fowler (grand manitou of forging 52100) when carefully forged and heat treated, this is the most versatile and dependable steel available to the knife industry. He feels that a man who depends on his knife deserves and needs the most reliable knife possible that will not bend easily or break when he needs it the most. A knife that can be sharpened easily and is friendly to his hand.

Ed got a very oldtimer advice for keeping his 52100 blade rust free:
“Any oil will keep rust from the blade, many times I simply apply the oil from the side of my nose or from behind my ear…”
One thing is certain: the more you use your 52100 blade, the more you check it and oil it with your hands.

Appleton_Ron Fowler Sheep-w.jpg

Ed is not stranger to folding knives as he has teamed up with Ron Appleton and forged the blade out of 52100 for his “Chub” in 2001. Ron wanted to create a folding knife that would be capable of withstanding the rigorous demands of a straight blade user.

Our friend Ed Schempp is another fan of 52100 here what he was saying about it in 2005
“52100 is a very good steel. Ed Fowler has spent a life time tweaking this steel to improve performance. With multiple thermal cycles, normalizing and interrupted quenches, and low temp forging has accomplished and extremely fine grained steel.
Most of the time a good smith can further refine the grain on production steel. Some of the grain can be smaller then but not of the homogenous size that Crucible attains in their CPM products.
This translates to a finer cutting edge that can be sharper than S30V. This edge will not necessarily last as long as a high Vanadium steel like S30V, but can a higher initial sharpness.
The thermal treatment to bring the best of what 52100 has to offer will be expensive, although a simple heat treatment will still bring forward a good amount of what the steel has to offer. Differentially hardened blades would be very difficult to do commercially.”

So 52100 is still a guilty pleasure, because you know it will stain, it will need maintenance but when it come to using it hard and hone it back to sharp, this steel shows is true colors !

Folders, Review

Spyderco C210CFP Reinhold Rhino: The Mini Chinook ?

06/07/2018 nemosandman 1 Comment

My first impression is that this little folder is designed as a very strong little workhorse. Nested liners, carbon fiber, compression lock, integral guard (short choil), full flat ground blade, belly on the edge ? What no to like ?
The hour glass clip !! Because it’s not deep carry friendly ! At least it doesn’t create a real hotspot even when holding the handle tight.

See ? The Rhino could be compared to the PITS in the way the guard/choil is working.

Then it could a be a small folding Sharpfinger.

So far it’s another “Little big Knife” by Spyderco which could be used in the woods or in the city. Taichung is again top notch in the manufacturing, the liners are polished for example. Visible bronze phosphorous washers are visible and gives a very smooth opening.

This is the kind of knife which is crying to be used and the belly with the thin edge will certainly give a max of cutting power.

One last thing: I love the Reinhold logo.

More to come soon.

Folders, Review

Spyderco C223GPDGY Para 3 Maxamet Part II.

12/06/2018 nemosandman 5 Comments

The Grey Mouser has been in my EDC rotation since it has arrived in my pocket.
So this a little report.

Maxamet is like a super CPM M4 to me, it cannot seem to get dull. I have deshouldered the edge and keep it sharp (razor) with white ceramic and leather. The edge behaviour in wood is like M2, it gives a gentle patina to the part cut.

The gently rounded spine is a must for thumb push cutting.

The lock is solid and did not give in to any vertical or lateral play.

The Para3 is really a friendly 3 inches knife with a wide spectrum of uses.
Near the pivot you got as much as any C36 Millie strenght for power cutting as this is the same “cockpit” as the good old Military. The point is easier to control as your hand grabs the blade and the handle with more ease on smaller knives. So you got a very capable knife for the outdoors, able to carve and trim wood.

Maxamet is giving a beautiful orange red patina. I have not been able to get any pit of rust despite my every day use on acidic foods.

It’s less sensitive to medium than K390 and close to CPM10V. You got stain but nothing more in my experience.

I clean it directly under the tap of in a soapy water. Nothing extravagant. The action is on the smooth side even without any oil near the pivot. I have decided to treat it the hard way.

So far I’m really impressed by the ease of keeping razor sharp that very special alloy. It’s not difficult with only white ceramic and leather and it happen once a week just for a refresh.
The deep carry clip is back for tip up carry and it makes a very low signature for an EDC.

It’s used every day for eating and mostly I use the spine to push in the plate.

An apple a day keep the doctor away, especially if you got a good aim.
More to come soon but so far this is a very satisfying experience.

Folders, Review

The Spyderco PPT Round 2 — The Son of Anarchy.

29/04/2018 nemosandman 4 Comments

Strangely I am coming back often to the PPT when I first thought it would be a collection and a safe queen. Safe queen my a$$ ! Pardon my French but there is something quite sensual when holding this knife, something which makes the other feel “hollow” in comparaison. The PPT got that heavy butt “anchoring” it to the palm but also the toxicated finish of the handle’s slab is a delight under the thumb.
There is something almost “paleo” in the finish. Something primal in the mechanical way it feels. It’s dense but is designed to be heavy metal. It’s a knife Opie could have admire…

On the performance side, I have decided to get a convexed edge. Diamonds are the only language stubborn S90V seems to understand and scratches on the blade side are, well especially for the clumsy sharpener, something hard to avoid especially when using the stone at a 10° angle to get rid of that secondary bevel. The performance in pushcutting are really enhanced now. I can measure it to the Manly Peak and its thin S90V blade.

I use white ceramic to make the steel shiny but S90V is really a tough cookie in the kindergarden of alloys: it’s a game of patience to obtain a nice finish.

But now on plastic I can enjoy the enhancement of that already very thin edge. It goes easy through.

Someone asked me why using a workhorse knife on tomatoes ? Tomatoes may look like some fragile fruits but they are not: their skin got no pity for any dull knife and their flesh will give in under any pressure. The best tools for tomatoes are serrated and micro serrated knives.

Hence that test on my polished edges. You need a very keen blade to push cut in a tomato and make thin loaves. Plastic and bambou can be used to test the edge stability which often is only due to thermic treatment of steel.

The alignement of the point on the PPT is very different from my Millie and is very close to the experience of the YO2: its makes powerful cuts.
Also the handle makes Icepick/reverse grip very confortable, knowing this is the favorite grip of Philippe Perroti on La Griffe, a grip I have found handy in forcing a door. Just kidding but the confortable reverse grip (à la “griffe de chat” in French) is not a joke.

You get also an excellent blade/handle ratio for a choiled knife compared to my Para3 for example.

And as good as the non-choiled Sliverax !!

My PPT has been used in the kitchen is not easy to clean because the way the hole in the liners are not accessible. This is serious issue if, for example, a piece of raw meat get stuck there and could contaminated the blade. The full Reeve Integral Locks are the best lock for checking your folding for any debris. I would have preferred solid titanium liners without that hidden cheese holes which ask for special maintenance starting by unscrewing the slabs to get full access and complete cleaning.

So in a wrap, the PPT is a compact hard user with very high performances featured by great ergos. It has a really strong character (it feels like it has been done for some Hell’s Angel fan) but once deployed it will pierce and cut with high reliability. Once the PPT is entering the game: this is serious business. For the record being represented to bikers gathering, bikers love La Griffe and various neckknife which are handy on a ride. So it’s easy to understand some DNA in the PPT design.

Advice, Folders

About Locks — How to choose ?

18/04/2018 nemosandman 4 Comments

wp-image-1457197829
Nowadays rendering of three iconic 90’s lock: Liner Lock, Back Lock and Integral Lock.

They are plethora of locks since the 90’s when the Tactical Folders trend started.
“Tactical” , a term which has been mainly used in a marketing way, means you can get access to your knife easily — A clip or a well thought pouch — and more important: to be able to open it and close it with one hand.
The blade needs to be locked in open position and also to stay closed while in the pocket.
Let’s have a look on the locks I prefer and use.

Maxamet Para3 Compression Lock.

The Compression Lock.
Described as:
“A lock mechanism that uses a leaf-like spring from a split liner in the handle to wedge laterally between a ramp on the blade tang and the stop pin (or anvil pin).”
What I like about that Spyderco in-house engineered system is how smooth the action is.
Spyderco is now developing and proposing flippers with the CL because the breaking action on the pivot is minimal. On my different CL folders I can open the blade in different ways: using the index, pushing the paddle to unlock the blade…
It’s fun. It depends on a detent ball to keep the blade closed.
It’s a lock easy to clean and check as the handle are all open framed. It also asked for some nested liners which, when they are skeletonized, need more attention for cleaning, especially when you use you knife in the kitchen like I do. I rinse them under hot tap water , wipe the blade and make them dry inside the pocket with body heat.
Also the compression lock can be hurting the palm of your hand when cutting hard matters.

Native 5 Back Lock.

The Back Lock.
Described on the Spyderco” Edge-U-Cation pages as: “A locking system positioned on the back of the handle that uses a rocker arm that pivots in the center. A lug on one end of the arm engages a notch in the blade’s tang to lock the blade open.”

The Manly Peak and the Native 5.
This lock has been infamous since the Buck110 and all its copycats. Spyderco has developed mainly mid-locking system which can be unlock without changing your grip lick on a Buck110. It was demonstrated with the first Native how safe it was it unlock their knife and let the choil of the blade get in touch with your finger before to close it.
This is still the way I do it, even on my Delica and Endura which got no proper choil: unlocking the blade by pushing the lock free and let the blade falling half way on your finger. The Back Lock got a spring which is strong enough to avoid a detent ball. Old timers used to pu a match inside their closed Buck110 to pass the stronger spring tension and get it open faster. On Spyderco’s, it’s also easy to avoid any locking noise just by pression the paddle before it get completely opened. Unless the blade is very heavy like on XL Cold Steel Voyager, it’s not a lock for gravity opening. But it’s one of the most solid lock. In fact because of the way it’s engaged, it can be much more solid than all the other locks. Spyderco were testing their strong back found on the Chinooks and Manix with amazing results.

wp-image-1298363584
It’s not the easiest lock to clean as there is no open framed handle. It’s hard to see if debris can be jammed in. Also it’s not the funniest lock to use as the spring tension is felt during all the opening and closing motion. The Spydies with relatively heavy handles can be spyderdropped for quick opening. I do that on my Knifecenter stainless steel spacered Delica for example. It’s also easy on your palm during hard cuts because of their closed handle spine. Some Compression Lock haters are Back Lock lovers because of that confortable handles.
Also I have noticed on many of my Back Locks knives some vertical play when cutting on board which brings us to…

The TriAd Lock
Featured on Cold Steel’s folders it is essentially a Back Lock with a stop pin. There is no more vertical play when cutting. It doesn’t change anything toward the negative force used to close the lock blade.
You can also find inside the Chaparral an hidden stop pin invisible as it’s hidden near the pivot.

The Liner Lock.
“A locking system developed by custom knifemaker Michael Walker that uses a leaf-like spring split from the liner to wedge laterally against a ramped surface on the tang of the blade.”
This lock was the king of Tactical frenzyness back in the 90’s. The Benchmade CQC7 and AFCK promoted them in titanium and Spyderco developped their Military with a stainless steel liner lock. If I remember well Sal Glesser and Les de Asis were together private students of Bob Terzuola which is a master in liner locks making before to start their own production. Depending on a detent ball, the liner lock was bringing that smoothness the Back Lock could not provide but it was not the strongest lock available.

wp-image-1554915927 Ed Schempp Euroedge strong liner lock.

To test it many people tried the infamous and stupid spine whack and many time with shock the liner was unlocked and damaged by that treatment.
It’s a very easy to lock to get open and close fast just be careful to put your finger out of the way when closing.
Titanium liner locks are wearing more than stainless steel liners.
It should not be difficult to clean depending of the handle conception. On that matter the last version of the C36 Military got rid of they spacer and got now a full open handle for easy check.

The RIL
Then Chris Reeve came with his Sebenza and used a lock bar that is integral to one of the handle scales. It was giving you the sentiment, you hand’s grasp was also enhancing the locking mechanism. It’s also a very easy mechanism to clean and check hence the Spydiechef, or the K2 which are easy to use in the kitchen even after being defiled by grease and meat…
RIL of the Advocate and the ZT550.

The PPT is a mix of both RIL and liner designs with the possibility to grasp it and hold it in opening position.

BALL BEARING LOCK
“A patented compressive lock that wedges a ball bearing between a fixed anvil and the blade tang. The mechanism also serves as a detent to hold the blade in the closed position.” I was developed by Eric Glesser for his Dodo and can be found on the Manix 2 folders with a caged ball version. Some people found a lot of similitude with the Axis Lock from Benchmade but here, instead of two omega springs, it is a coil spring pushing a ball bearing made of ceramic of stainless steel. It’s smooth but not as easy to clean as other locks. Actually I prefer it on the Lightweight version of the Manix which is my main travelling knife with its CPM110V blade. It’s engineering makes it one of the strongest as you can not squeeze a ball bearing easily and it is also self adjusting.

The cage ball can be exchange with a custom titanium cage in case of breaking after years of using. It happen to my cousin who has modeled his own resin ball.

The Balisong Lock.
This could be the most fun system to use and also the strongest. Easy maintenance, no spring… It’s a very old design. The first trace was found in 1780 in France with a knife called “Le Pied Du Roy” (The King’s Foot) and circa 1800, butterfly knives were uncommon. They were made in Paris and Thier. There is a beautiful collection of the old Butterfly Knives in the Thiers Museum. French Army troops were provided with Butterfly Knives, but after WW2 there is no more trace of Butterflies made by this brand.
(More to come in the re-edition of the Fred Perrin’s balisong review soon.)

Locking a folding blade has been a puzzle for engineers for centuries. The roman folders were not locking and 2000 years ago a folding knife’s handle was considered as an attached sheath which means it was hold like a razor: by the blade.

So how to choose a lock ? Recently I have been surprised on how well the Bulgarian Manly Peak was operating: no vertical or lateral play on its very strong Back Lock. I have been playing with the Sliverax Compression Lock flipping options. My old Sebenza RIL lock is still in great shape and my Ed Schempp Bowie flies in opening position…

Lock is just a matter of taste and use, selling a design just by its lock won’t work. Some designs are made for compression lock like the Sliverax wasp shape flipper design could not go easily with another lock.

But always remember a folder cannot be as strong as a fixed blade. Marketing can be your enemy but the main enemy of locks are shocks because its weakest element will give in, bend or broke. Now when you choose a knife made by reknown makers and manufacturers you can trust their locks but it’s not the case with all the copycats and cheap knives which often got very bad quality elements ready to break or bend at the first use. I’m not saying the best locks are the most expensive but looking for quality in the making should be mandatory in your choice.

Folders, Review

Spyderco C223GPDGY Para3 Maxamet — The Grey Mouser.

10/04/2018 nemosandman 6 Comments

It has been half a year of patience before my pre order turns into a mail call. Howard Korn from the Knifecenter.com was kind enough to send it to me as soon as he has received it. It was a quick 6 days of travelling from Fredericksburgh, Virginia to Paris.
The name of this Para3 should be”Desire” but it will be “Mouser” in honor of its color: grey. Also in honor of its almost magical alloy used: Maxamet.

What is Maxamet ?
According to Spyderco its full name is “Carpenter® steel’s Micro-Melt® Maxamet® alloy”. “Maxamet is an extremely hard high-speed powdered tool steel possessing properties that transcend conventional high-speed tool steels and approach those of cemented carbides – the ultra-hard materials used to machine other steels. When Carpenter developed this amazing alloy for the rollers in their steel mills, they sent samples to various companies in the knife industry to evaluate as a blade material. Although many tried, Spyderco was one of only a handful of companies to successfully develop the specialized methods necessary to machine, heat treat, and grind this demanding material to yield reliable, high-performance knife blades.”
It so difficult to work with that it has given some headaches to Eric and Sal hence the 6 months late in the production of that Para 3.
Maxamet should have better performance than CPM110V. Now that I got both steel, I will try to see if I feel and see a difference.
What its composition reveals ?
Carbon 2,15% ; sulfure : 0.070% – 0,23%; chromium : 4,75% ; vanadium 6,00% ; manganese 0,30% ; silicium 0,25% ; cobalt : 10,00% ; tungsten 13,00%.

It’s not a stainless steel it’s an high tech tungsten alloy !!

Here its data sheet in Carpenter’s.

The wear resistance of Micro-Melt Maxamet alloy is better than that of conventional powder metal high speed steel grades and is equivalent to AISI A11 cold work powder metal tool steel. A11 is CPM 10V. Better? How much better ?
According to Cliff Stamps: “Maxamet is an extreme alloy, for comparison, it is to 10V what S90V is to 420J2. Maxamet is used when HSS like M4 fail because they are too soft or wear too fast – just consider that for a matter of perspective.”
(For the record he’s not talking about CPM M4 which comes from powder metallurgy process but good old M4HSS.)

So far Mouser is shaving my arm’s hairs which are flying of its blade. Its factory edge is really thin. With that amount of tungsten it should not be sensitive to its final tooling in the Golden plant. I’m not planning to work on it yet and keep it that way for its first run.

Its complex heat treatment and the HRC should be on the very high..

Spyderco is offering that steel on many knives: not counting a Mule but a LW grey Manix 2 , a G10 grey Paramillie 2 and a lightweight grey Native…
The Maxemet version is not a Sprint run.

I have also noticed the chamfered work they have made on the spine and the spyderhole and the jimping behind the hump. I don’t have to use my diamond rat tail file anymore !!
Thank you Golden ! 🙂

Also the blade has been gently beadblasted which gives it a very industrial look. The grind is perfectly symetrical as always on my Colorado’s made.

The thick grey G10 slab also concours to give that toolish look, again the attention to detail are stellar. There is nothing to change when you open your black and red box.

So far what I have changed is the clip, as I don’t plan to spyderdrop this little guy.
The smooth compression lock permits a lot of other way to open it elegantly.
Also I have sanded the G10 to smooth it to my taste and keep my pocket lips healthy.
I keep the pivot area rough for the ergos.
Now the game is on, let see all this fuzz about that Maxamet steel !
Spyderco catalog’s sheet is here.

EDIT: Eventually I have gone back to the OEM hourglass clip in a Tip Down carry option.
Because it’s so fast to draw like a I do on my Millie and Paramillie 2.
The spyderdrop is so elegant and bound to the spyderhole: it works like a breeze.
Also I have starting to test the sharpness which is uncanny right our of the box.
I did not have that kind of result with its S30V bro. The Maxamet thin edge goes through the plastic bottle butt to make tagliatelle !! The edge is really hungry.

Also my previous review on the Para3 is here.

Between both knives there is a little difference. It is the sound of the mechanism.
The opening and locking on the S30V version will be a TAK.
When the opening of the Maxamet version will be a TIK.
The pitch of Mouser is much higher. Different alloys, different hardness produce different sounds.

The Mouser is a small (not much more than five feet) mercurial thief, gifted and deadly at swordsmanship (often using a sword in one hand named “Scalpel” and a long dagger or main-gauche in the other named “Cat’s claw”), and a former wizard’s apprentice who retains some skill at magic.
The cynical-sounding Mouser is prone to showing strains of sentiment at unexpected times. He’s a rogue, living in a decadent world where to be so is a requirement of survival. It was created by Fritz Leiber.
Part II is here:
https://nemoknivesreview.com/2018/06/12/spyderco-c223gpdgy-para-3-maxamet-part-ii/

Folders, Review

Spyderco C135CFP PPT — Portable Praetorian Tool.

26/03/2018 nemosandman 4 Comments

The first PPT was release eight years ago. It was the mind child of Sacha Thiel and Philippe Perotti. For the record Philippe Perotti aka “PP” was Fred P.’s student in knife making (and PP being an instructor in handguns and fire arms). I still own one of PP’s Streetbowie made in D2 and also one of his great great Commander knife made with Sacha Thiel and produced in Maniago which looks a lot like the Spyderco Streetbowie.

Now the design’s goes in the stardom with a luxury amazing S90V / Carbon Fibers corrugated stunning handle.
This rude boy is a beauty like Marlon Brando in a Streetcar Named Desire or Tom Hardy in Taboo. It’s heavy in your palm. But this weight is a pleasure exactly like the Sharpfinger. Marc Animal McYoung in his book “Knives, Knife Fighting and Related Hassles” was choosing a butt heavy short knife over any other. The weight is like an anchor in your hand as the knife handle is cuddling inside your palm. You find the same idea of weight distribution on heavy butt first Streetbeat.

Talking about the handle, this macro-texturing shows a wild side of this tool.

On this picture you can notice the unique clever sturdy lock. It’s made to be secured once the handle is hold tight.

The steel liners and the full steel back spacer, the full steel construction, while sturdy, makes for a dense carry. Being able to use the “pommel” as a crowd pleasure won’t be a surprise. Anyway it’s a lil hammer which can certainly be used to drive a nail in a plank.

Balance wise, let’s just compare it with a titanium folder, the Spydiechef.

It’s a matter of taste but I love it as the butt heavy balance suits me.

In eight years the Taiwanese manufacturer has refined his production.

The choil used to be a hotspot in the first version I had handled back then. No more now, there is absolutely no hot spot but… the infamous clip.

The way it’s stand with a point prouddly high …it’s really not the best Spyderco clip just compared with for example… the Lil’ Lionspy great great spoon deep carry clip !!
The pointy end of that clip needs to be parallel to the handle as this one is an invitation to scratches cars doors and catches things.

But its zips easily inside the pocket. It’s a no brainer.

Like the Spydiechef the design of the PPT notice how it give you a lot of power in case of cutting on a board. But the PPT won’t be as easy to clean with it’s squeleton thick liners but nothing which cannot resist to some hot tap water.
This new incarnation got a very thin edge. Those full flat ground blade in S90V provided by Spyderco lately are a pleasure to use and performance oriented.

But its true brother in law could be the Yojimbo 2.

The PPT got a very strong spirit, mix that with Sacha Thiel attention to details and Philippe Perotti pragmatism and you got a very powerful EDC which can be used by soldiers, firefighters, hunters, cooks, collectors and bushcrafters.

A little edit: after some EDC carrying and using.
Of course I have started to de-shoulder the edge and gives the PPT a more friendly way to get strop on leather.
Ergo wise, this heavy butt is really addictive. It works like a magnet because of that handgun handle. It makes your tool almost jumped in your hand and really anchored it in your palm while the perfect radius of opening makes it a very fast and safe opener. The meat of your finger is caught by the sharp hole and SHLACK !! It’s really one of my fastest tip up carry opener so far.
Why is the PPT a tip up carry ? I remember Fred bitching about the way some newcomers (back in 90’s) who were providing RIL locks with a tip down carry: the clip was in the way. What I loved in the RIL lock on the Sebenza was the way the hand will secure the lock just by holding it tight. With a clip attached near the pivot, you could not squeeze the handle anymore and secure the lock.
So the PPT reflect all those years. It’s a real biker friendly design, like the La Griffe has always been. Bikers are modern world horse riders. The PPT would a horse rider best friend too.
In the part 2 the rider could be a nightrider ?

Folders, Review

Spyderco PARA 3 G-10 Black on Black C223GBK — The Black Panther Cub

05/03/2018 nemosandman 2 Comments

This is my first Para 3 and also my first black coated Spyderco blade.
According to Spyderco:

“For tactical end users who are concerned about light discipline or those who just prefer the look of a black blade, the Para 3 is now available with a tough Diamond Like Carbon (DLC) blade coating. This low-profile coating is permanently bonded to the premium CPM® S30V® stainless steel blade…”

Cool I do really love DLC as it’s really scratch resistant. The primary reason for blade coatings is to reduce the reflective properties of the steel. Shiny things draw the wrong kind of attention and in a military environment, can tend to get people shot. However, like anything else intended to be used in a military environment, coated blades are not immune to wearing off but DLC is really strong.

I also specifically love DLC for adding corrosion resistance. The area which normally rusts on an EDC is in the pivot area. No worries about that with a DLC coated blade!

The new Golden Co. factory is bringing some of the best quality in manufacturing to date. My Para3 is absolutely flawless: perfectly centered, perfect smooth action… I had noticed that rise in quality on my last sprint run Para2 in 52100 too. Now Golden is as good as Taichung in quality control – if not better. So kuddos Colorado! Also Eric told us during the last Minimeet that they have just hired two new engineers who will make a real difference. Spyderco has developed a speed training of their own engineers as no school had prepared them for the knife industry.

Like the Paramillie 2 was a son of the Millie, the Para 3 is really Millie’s grandson. Same “cockpit”, stout hardchore 3 inches blade, smooth Compression Lock.

My all black version is very discreet and the the short blade makes it even less threatening. A black “commando” feel on such a short folder is almost like an tribute to military blades. On a short knife like this baby millie the “cute” factor is very strong.

My hand fits perfectly on that handle. That infact was a big question mark prior to holding the Para 3. You feel this short version of the Millie is ready for any task.

The DLC coating is absolutely stunning. I have sanded the G10 and put a great deal of care so to not scratch the steel hardware.

Here after some plastic cutting which scratched some of my other blades, there were no marks on the diamond hard coating. Let see how it will age.

At first I had mounted the clip for tip down carry (left pic) and experienced great spyderdrops. The Para3 is so smooth in its action, a middle finger is sufficient for opening.
As I got the opportunity to get a titanium clip from Massdrop (right pic), after transformation it’s now a tip up solution and a middle finger opening work best for me. After all, a black knife, even of that size, needs to be as discreet as possible.

Some thinning of the edge, from DC4 diamonds to white ceramic until leather stropping.

It worked great as I was not able to scratch the DLC coating.

I got much better performances on pushcuts into the thick plastic of this coke bottle butt.

Of course, I had soon christianized the knife with a fumble… Drawing blood means luck.

The Maxamet PARA3 Review is here.

edited by Pascal – 14 march 2018.

Folders, Review

SPYDERCO C192TIP – My Knife In Law.

25/01/2018 nemosandman 2 Comments

Following the arrival of the PITS, the daily testing has come quite quickly as it hasn’t left my pocket still so there have been a bunch of opportunities to put it in play.
The first thing I noticed was the action required to open the folder which is much harder than for any compression locks. This is something to keep in mind as you won’t be opening it quicky; the Urban for example is faster to open.
This resistance is also a proof of how sturdy the spring and the design are.
The second thing I had noticed was how quickly the blue handle was subjet to getting scratched.
So, I was obliged to put my mind at rest by simply sanding the handle…

I just used a 600 grind sandpaper and the result kept the blue inside the holes and inside the mechanism, like a well worn denim jacket… The scratches are easy to keep at bay and the blue aura and reflections are beautiful.

Another thing which I had noticed: there is one very hot spot…. The horn on the talon of the blade can bite you ! It happen once when I was sanding; a sharp and neat cut!

After some convexing of the blade’s bevel, I was able to improve the geometry and cut really easily through plastic bottles which are everyday processed before recycling.

This is also a knife I wanted to compare with my faithful Urban.

My Urban has got a hightech tool steel blade and a customized Cuscadi carbon fiber handle. I can carry it in my watch pocket. The PITS cannot go there but it provides a much stronger mechanism and a longer blade which makes it a real all terrain folder when the Urban is really limited to the city sleakers.
So far, and that’s not surprising, the N190co steel blade has been kept as a razor using some white ceramic and leather stropping. The PITS unique mechanism makes it great to strop on leather as the blade cannot easily fold on your fingers when the Urban softer mechanism asks for a lot more attention.

The PITS is really easy to live with. The steel keeps an excellent edge with no chipping or rolling and is easy to touch up. The bad weather these days makes it outside wet and cold but the titanium handle conveys a warm touch and the grip is secure. Currently I make it team up with the big bad Real Steel D2 bushcraft folder and both seems to go very well together.
Those are the two extreme among the folding cutlery bow.

Oh and just for the pleasure, you can also play the comparaison game with the Spydiechef !

lasted edited by Pascal Jaffré on 25 jan 2018

NemoKnivesReview

Category Archives: Folders

Spyderco C81GPCW2 Paramillie CPM CruWear KnifeCenter Exclusive — Another Smooth Operator.

52100 A guilty pleasure !

Spyderco C210CFP Reinhold Rhino: The Mini Chinook ?

Spyderco C223GPDGY Para 3 Maxamet Part II.

The Spyderco PPT Round 2 — The Son of Anarchy.

About Locks — How to choose ?

Spyderco C223GPDGY Para3 Maxamet — The Grey Mouser.

Spyderco C135CFP PPT — Portable Praetorian Tool.

Spyderco PARA 3 G-10 Black on Black C223GBK — The Black Panther Cub

SPYDERCO C192TIP – My Knife In Law.

From The Edge To The Point Since 1995