Like I had mentioned in the glimpse review of the Serrated Chaparral, this little, thin folder is built to punch above its weight. Thanks to its sturdy construction and relatively strong stainless steel — the same type found on my Cold Steel Recon 1 XL — it can be tested and used like a much larger knife without compromising performance.
Solid steel, sturdy lock? Not much difference from a larger knife, in fact. 😉
So far, I’ve put the knife through its paces, cutting anything I could, and maintaining the edge with some Jade stones (see first picture). The mechanism shows no signs of play in any direction — rock-solid performance.
The plastic is thicker that the blade.
As you can see, the serrated edge is a chisel grind, which means it tends to deviate slightly to the right of the material being cut, much like a fin in water. I started the cuts with a bit of sawing, then transitioned to push cuts, and the knife effortlessly sliced through the thick plastic used to form the bottle.
This little knife is fierce in term of cutting performance. It is a lot of power in your pocket ! It is a pocket chainsaw !
The serrations really shine on the plate. You can push the knife hard against ceramic surfaces, and if the points ever need a touch-up, a few passes on a ceramic corner — or in my case, a jade corner — brings them back like new.
I have been able to reach razor level just by passing gently the Jade on it.
Actually it is fun to enhance the edge.
Actually, this is a bit of a comeback for me with serrations, dating back to my AFCK experience 25 years ago. Back then, I mostly used partly serrated edges, which helped initiate cuts on hard materials.
With a fully serrated thin blade and no plain edge, I initially wondered how useful it would be in the kitchen — especially since my wife’s favorite knives are Victorinox fruit knives (serrated). But it turns out, neither fruits nor vegetables can withstand the sharp, wavy edge of the Chaparral.
Funny enough I have been able to strop the edge of the Chap by using the side of the leather belt. CTS XHP is a steel which loves leather in my experience.
All in all, so far, so good. The Chaparral delivers impressive cutting power. Its thin, fully serrated edge is unique within the Spyderco line, pushing the design out of its comfort zone — and for a “knifeaholic” like me, that’s pure fun.
The next step is to trust this little knife enough to take it on a road trip in Italy — handling food prep, wood, and low-profile carry as my only pocketed folder. The Chaparral will make its return in May.
M398 is a fragile steel compared to M390. The encounter of the tip of the Roadie XL with a tile of my kitchen has been definitive. One mm has been shattered and now I got a micro flat screwdriver as a tip. OK. Diamonds are steels best friend. I’m able to form a new tip in a diamond shape.
For now I won’t baby that Roadie XL anymore. I decide to thin the edge.
The best way is to protect the blade to avoid any big scratches.
Then it is time to play with industrial diamonds.
I will also use some diamond rod to round the jimping.
Of course I’m enough clumsy to scratch the blade twice and I’m obliged to use some diamond paste to treat the surface.
Then some polishing paste on the leather to slowly makes it like a mirror.
I’m quite happy with the result.
Time to test this new geometry. The edge has been convexed and thinned it should cut much better.
One of the most difficult task is to cut in two the butt of a two liters plastic bottle. This is a test my Scandi blades fail all the time. Any Opinel is king in that. Or the Manly Wasp ! My favorite being the Nilakka.
As a whittler it goes deep in wood.
As a steak knife, the shape of the blade brings only the new tip in contact with the ceramic of the plate.
That new tip is strong enough to be able to pierce a metal lid of a green bean jar. A hole pierce help the release of the lid on some jar. No damage no more. Now the Roadie XL cuts much butter.
Six years ago, I reviewed the Working Poney, also known as the Roadie. Mine had been reprofiled by Jan Dirk, and even on its tiny scale, it proved to be an outstanding performer. For six years, it quietly stowed away, accompanying me across the UK, Vietnam, and countless places where knives were frowned upon.
Then, in 2024, I noticed the announcement of an XL version — the C267BK — featuring a better steel and a clip. Right away, I saw the new pointed blade, replacing the classic sheepfoot-style blade, now ground from Böhler-Uddeholm N690Co. Even more exciting, the XL uses M398, an exotic steel reserved for flashbatches — a serious step up in terms of performance and collector appeal.
And so, here it is: Ladies and gentlemen, the Roadie XL !
They say an image is worth a thousand words, so here you have 4,000 words with no syntax or spelling errors.
Back to the Roadie XL: it is made in Maniago, Italy, just like my Nano and many other excellent knives these days. The Maniago plant remains one of the best worldwide in terms of quality and precision.
Specifications:
Overall Length: 6.51″ (165mm)
Blade Length: 2.74″ (70mm)
Steel: M398
Closed Length: 3.76″ (95mm)
Edge Length: 2.31″ (59mm)
Weight: 1.5oz (43g)
Blade Thickness: 0.108″ (2.8mm)
Its shape and size make it extremely pocket-friendly, easily fitting into the watch pocket of a pair of denim jeans thanks to its deep-carry wire clip. You could remove the clip, but why? It keeps the knife perfectly on the pocket’s lip. The clip is also reversible, though that’s not mandatory for a two-handed opening folder.
With its thin profile and light weight, combined with the clip, the Roadie XL can even be carried in a shirt pocket like a pen. In short, it’s a knife meant to stay on your person almost unnoticed.
The action is smooth, with two stops/steps before the blade fully opens. In practice, it feels smoother than my Urban, which only requires a single hand to deploy.
With a slightly longer blade than the Urban, the Roadie XL remains legal to carry in countries such as Denmark, the UK, or Germany. Mine arrived razor sharp straight out of the box, so I’m in no particular hurry to convex the edge.
Mine came razor sharp right out of the box. So I’m not in a special hurry to convex its edge.
You can immediately recognize Sal Glesser’s signature design—a clear mark that it’s his invention. Sal is an inventor, and it’s always impressive to see how he manages to create clever, practical tools. Quoting him directly:
“When the Transportation Security Administration (TSA) briefly considered allowing the carry of knives on airplanes again, Spyderco designed the Roadie™ to fit their guidelines. We created an incredibly popular modern expression of the classic penknife. Since bigger can indeed be better, the Roadie now has a big brother: the Roadie XL. It faithfully offers all the defining features of its smaller counterpart—including a non-locking “notched-joint” mechanism, a textured index-finger choil, and contoured, injection-molded handle scales. Its full-flat-ground sheepfoot-style blade is crafted from M398 stainless steel and features our distinctive “Double Dent™”—a pair of symmetrical dimples in the blade that provide a solid purchase for a fingernail-free two-handed opening. In addition to its larger size, the Roadie XL also adds a deep-pocket wire clip for convenient top-of-the-pocket carry.”
Now, let’s talk about M398, one of Spyderco’s premium powder metallurgy steels, only available in limited flash batches, all made in Maniago, Italy.
From what I understand, M398 is closer to CPM-90V than to M390. Quoting Darrin Thomas’s analysis (which is worth reading in full):
“The original M390 has a reported carbide volume of 20.5%, and the new M398 has about 30%, so there has been an increase in carbide of almost 50%. We would expect this to lead to a significant reduction in toughness along with an increase in wear resistance. The datasheet shows that the toughness of M398 is only about a third of M390, though at somewhat higher hardness. So it is apparent that the design of M398 is all about wear resistance and essentially ignores toughness. M390 has only slightly lower toughness than K390 with similar carbide volume (though K390 was tested at 62 Rc). M398, on the other hand, has significantly less toughness than the similar carbide volume S290. However, M398 does have some positive traits, such as increased hardness and reduced retained austenite relative to M390. I’m personally not all that interested in yet another high edge-retention steel that sacrifices toughness, ease in sharpening, and workability. We had other options and this initial look doesn’t make M398 appear to be an improvement over the other available steels. M398 was a relatively simple modification of M390 and I can’t help but think that a more optimized version could be made. M390 did offer similar toughness to cold-work tool steels like K390 with a similar carbide volume, but M398 has significantly lower toughness than the similar carbide volume S290. So M398 doesn’t appear to be over-performing relative to its composition and carbide content. I wrote about some Bohler-patented high wear resistance steels using niobium instead that look very interesting but haven’t seen a commercial release. Those steels would be breaking new ground and potentially offering new property combinations not previously available. But if Bohler pushes out M398 more broadly it will be interesting to see how knifemakers utilize the steel for applications that benefit from high wear resistance and edge retention.”
When M398 was used in a previous flash batch for the SpyMyto, I wasn’t particularly excited—it felt like overkill for a folder that seemed built for hard use. The Myto is essentially the big brother of my Nano made in CPM Magnacut, and a SpyNano in M398 is also on the bench. In comparison, Magnacut is far tougher than M398, making it more suitable for wide, workhorse blades.
On the Roadie XL, though, this is a different story. Like with my Heinie Urban in S90V, these small blades are not intended for bushcraft—but some highly skilled bushcrafters can make miracles with even a 2-inch slipjoint, as shown in an inspiring video I recently saw.
Slip-joints are gentle companions for both ladies and gentlemen. For those with long nails, the Roadie XL is equipped with its distinctive “Double Dent™”—a pair of symmetrical dimples in the blade that provide a solid purchase for a fingernail-free, two-handed opening.
Its high wear resistance comes in handy, as these small blades often encounter cardboard, which can be surprisingly abrasive. I also recall Roger, my father-in-law, wielding his old Pradel slip-joint like a crowbar or flat screwdriver, without a second thought. Old-timers often treated knives mercilessly, using them until the blade was as thin as a needle.
I’m confident the Roadie XL with its M398 blade would make an excellent hare skinner—the fur is full of sand that can destroy an edge almost instantly. Tuscan hare hunters would likely appreciate its durability. Its high wear-resistant alloy makes perfect sense here. Additionally, the blade is relatively thick at 2.8 mm, which would otherwise be prone to breakage.
Ergonomically, the Roadie works beautifully for a slip-joint because you can hold the blade by its choil—a feature rarely found on traditional slip-joints. Even most Swiss Army Knives lack that level of security, and with M398’s toughness, the blade cannot close on your fingers. As Spyderco notes:
“Unlike traditional penknives, the Roadie also features a subtle index-finger choil that increases control of the knife during use and acts as a safeguard against unintentional closure.”
There’s no undue pressure on the pivot, often the most delicate part of many folding knives. If you are careful not to twist the point in wood, the Roadie XL can withstand applied force directly to the blade. This makes it another “Lil Big Blade”—small but versatile.
It can serve as a steak knife, whittler, label remover, balloon popper, nail cleaner, or cardboard cutter. Brown cardboard is notorious for edge damage, but not for an alloy like M398, packed with carbides.
And in today’s world, one more practical advantage: it is extremely sheeple-friendly. The Roadie XL looks like a pocket knife, not a tactical or soldier’s tool, making it socially unobtrusive yet highly capable.
Beauty is in the eye of the beholder, but to me, this blade—shaped almost like a scaled-down cutlass—is pure eye candy.
Interestingly, I’ve discovered that I can open it one-handed in two distinct ways:
A fast wrist flick while holding the blade itself.
By gripping the blade with thumb and index finger and gently pushing the handle away with the middle and ring fingers.
So, even though it wasn’t designed as a one-hand opener, the Roadie XL can function surprisingly well as a one-handed knife in either technique.
Compared to a traditional sheepfoot slipjoint, the Roadie XL is incredibly light yet sports a premium alloy blade (Since August 2025 another slipjoint with M398 is available: The Metropolitan.). And at under 100 euros, the Roadie XL is an exceptional bargain for what it offers.
This is one of Sal Glesser’s finest EDC designs—a true Every Day Carry folder that balances elegance, utility, and performance. And for once, size really matters with a Roadie. No wonder it’s already sold out on the Golden site! There is part II here.
I know Jiminy (Cricket) since 1994. I even have used to have a pink version of this little bugger in the last millenium. Today, while making a little pilgrimage in famous Kindal cutlery shop in Paris,
Mme Kindal has displayed me one of her many treasures displayed, next to a Janisong and a Military titanium… It was love at first sight for that blast from the past little big knife. Because there is a lot of power in that compact package, it was the chance to carry another one of those New Old Stock.
It is true, the Tattoo version of the Cricket is a pure jewel and delight to look at and to use. It has been cleverly designed in House by Sal Glesser (but I won’t be surprise if Ed Schempp would have been also its inspiration). Based on the stainless steel version of the Cricket Tattoo it is really well made piece of cutlery.
Folded the C29T creates a rounded package that carries nearly invisibly in the pocket. The pocket clip carries right-handed tip-down but also attaches to a tie or makes a fashionable money clip. The anodized illustration is really elegant.
The Stainless Steel design using a Chris Reeve Integral Lock makes it really thin and easy to wear even in a shirt pocket.
It is a tip down carry which allow a very fast an elegant Spyderdrop opening. So its reverse “S” shaped blade get in action very very fast.
Its 2mm thick and 48mm long blade is tricky, thanks to its “S” shape: you got a longer edge to use. And like Eric Glesser’s Dodo, Sal Glesser Cricket is a geometrical trickster: the cutting angle is almost never at 90° to the separated material, acting like a sinusoïdal guillotine. It is very powerful. For a knife of its length, the Cricket is packing a lot of cutting power hence the name “Little Big Knife” used for that kind of Spyderco.
The Cricket is a joy to use in the garden on hard material…
… and on soft material.
Beware of that S Shape, beak or claw design, loves to catch anything around, you thumb for example can bleed in a blink of the eye.
The beak penetrates in any plastic sheet very aggressively. It is even surprising how easy it can open packages.
Some people are not fans of S Shape blade or any blade with recurved edge. It is a natural shape found in claws, talons, teeth and beaks. But by using a rounded ceramic (VG10 is not difficult to get back to razor) and the corner of the leather pad, the Cricket keep its razor edge.
Here is with a Jade sharpener. I sharp the belly on the flat and the beak on the corners.
It opened design makes it a breeze to clean under the tap.
I highly recommend the Cricket as an EDC knife. It is a little but powerful “matter separator” destined for Ladies or Gentlemen for daily duties which can be clipped to a purse, a pocket even a bra. I also knew a former French Marines, six-foot-four and full of muscle, who had adopted the Pink Cricket as his main EDC. Go figure how this little knife makes you wish upon a star !
Seven years ago I was already in love with a KnifeCenter Exclusive Native. The idea to propose a smooth G10 handle was IMHO a great EDC enhancement as G10 can turn any knife into a pocket shredder.
As you can notice the Native 5 with its OEM clip can perfectly be clipped to a watch pocket.
I was certain I have missed the opportunity to own one of those smooth operators exclusively made for the KCI when, Alex, a fellow member of the Facebook Spyderco Fan Club France has pointed it to me. They were still in stock ! HERE !!
I know monsieur Howard Korn, the founder of the KCI, since his very beginnings back in the 90’s when he was all alone, and suggested me to design their logo. Howard was the very first reseller to propose knives on a big scale using a very new medium: the world wide web ! What a venture ! And eventually what a success ! It was before Amazon and Howard is one of the pioneers in terms of spreading the cutlery’s culture worldwide. Hence now the great videos which are produced in house. Again, it has been a smooth transaction from the USA to France thanks to a great customer service for a great exclusive. I may be biased but this is my customer experience for almost 30 years with the Knife Center: flawless and inspiring.
Eventually I have found out I have bought perhaps the very last one of those Native Exclusive as 10 days later my order (June2024) they are now out of stock.
So what do we got here ?
I have written a lot about CPM Cruwear ! But this tough and well balanced alloy which can provide a crispy razor edge is perfect on small or long folders. This is a workhorse steel and one of the greatest high tech alloy available in modern cutlery. I have even proved how hard it was to get a patina on it. This time with DLC coating no patina or rusting will be feared. BTW DLC Diamond Like Coating is used from implants. It is not toxic.
This all black version of the Native is ready to be used in all weather conditions.
So here we got a very low profile package with a none threatening design as black knives matter when confronted to sheeples who could point you as a Mall Ninja with a dark saber.
These days I am reluctent to carry in the city a long blade/folder and my search for accepted shorter knives, locking or not locking is evident. I have previously studied knives which can be used in the city and the Native is one of them. The idea is a maximum of polyvalence for a tool which should raise eyebrows. A friendly not threatening package. The knid of knives my grandfathers and father used to carry without any after thoughts but in planes. 😉 When heading for the countryside, I don’t restrict my self in terms of blade length but for a big city, I play a very low profile game and most of the time I do strictly follow the Law even if I’m not fearing any kind of Police check. Hence the Native: same cockpit as Hellboy which is used a lot in the kitchen as the Chief as turned into a Chef but shorter.
There is also a swedge or on the blade spine on the Native which is not present on the Chief.
The action is smooth with zero blade play as chute drop is obtain by releasing the lock. I have already written and how those Golden Native are top notch in term of fit and finish, using them since 2011.
This version with no liner is for me the best design and this Exclusive the best of the best. In those years of titanium frame locks and axis locks, the chance to own a great lockback is precious. And this one is for me: the Last of The Mohicans !
Since the reception of my Chief Native I have found that he was a sole survivor from a Xmas Mystery Box bought in Spyderco’s plant in Golden in December. In that box were different items and a rare Sprint Run Second Factory which was destined to end in my pocket and considered by myself IMHO as the perfect realisation of Sal and Eric ideas about pocket knives. In fact I think it is my favorite Spyderco ever. I have written a first review here. And now it is time for a second approach of Hellboy which has succeeded in kicking other knives from my pocket and quench my thirst for novelty.
So why ?
First the Native family feature an absence of hump on the blade making them very slick and beautiful.
Even the Shaman benefits from that.
The Chief is on the left and the Shaman on the right.
As you can notice the design of the Native Chief is really close to one of my favorite design: the AFCK. Sal Glesser was no stranger in the Benchmade BM800 AFCK back in the 90’s. He helped Les De Asis founder of Benchmade on it. They had both learned how to make Michael Walker’s linerlocks at Bob Terzuola shop. Both company were accelerating on the tactical lane in close formation.
As you can notice, my AFCKs (Advanced Folding Combat Knife) which was also designed by Chris Caracci a former Navy SEaL have been used a lot. The first version got a Spydiehole and the second version got an oval hole and an axislock. This design was one of my favorite for a big folding knife as EDC. And back then I was really in love with concept of tool highspeed steel on a modern plateform.
The same happend with that special Native Chief which got a very special alloy for its blade: CPM-4V. With that steel, the edge is strong and the thin blade is very solid. It gives a lot of confidence when cutting on a plate made of ceramic of glass. No chipping can happen. Hellboy has been used a lot for cutting pies and cake on glass plates and the edge behavior was not disappointing. When I have noticed a little shiny spot, some white ceramic was able to put everything back on line but it was really minor.
Now CPM4V is not stainless. It will form a patina or, worst, rust very quick and easily when used in acidic matters like cutting lemons and being used on a salad with vinegar. DLC coating is really welcome for that kind of behavior. Back in the 90’s Benchmade was offering only PVD coating which is really inferior to Diamond Like Coating. So far the blade of my Chief is not marked and scar by it various cutting tasks even when cutting. My previous Chief was a naked Rex45 blade and it was another story told here.
Even strawberries can darken the edge of CPM 4V.
But cheese is a great way to notice how DLC is making the surface of the blade less sticky but more stinky.
The Chief was not always used on gentle medium like wood.
It was also used on plate with vinegar salsa. Here it is basamic vinegar from Modena.
In the kitchen the knife is really behaving like an paring knife. It is really handy on fruits and vegetables. Its very pointy blade is great to carve. .The mechanism has never suffered from being wet and rinsed under water. The knife was smooth through and through its various wet works.
Now I like to have chamfered and smooth handles and blade spine. The Chief is known to be very square everywhere. The G10 has been easy to smooth with sandpaper used wet to avoid toxical dust. Now the blade spine is DLC coated and it was my esthetic choice to remove the coating on all the length of its spine.
I love the result.
It has been done with some diamond rods. Now the spine is much more confortable for my thumb in case of push cuts.
CPM 4V on that Native Chief platform is really the bread and butter for a strong thin folder. I’m not afraid to use hard on wood and plastic. And it is a must in the kitchen various missions. It has been also test on different hard wood and compared (geometry speaking) with many other knives I got. One of my champion is the Swayback in term of smooth pushcuts. But also the Wolfspyder and the Yojimbo.
My Chief needed more convexing and thinning to go to the level I was expecting. Again diamonds has been used handfree to remove the shoulder of the edge. CPM 4V keeps a very very crispy edge and bites in the wood very aggressively.
CPM M4 is a stunning alloy which is prefered on fixed blade but it is a gem on a long and thin folder. It makes it super solid with a very permissive edge.
Some will argue that toughness is not important in folders or fine slicing knives and feel that only edge retention matters in that case because they don’t use their knives in aggressive ways which are likely to lead to chipping. However, broken tips are still common on small knives and kitchen knives. And with higher toughness, the knives are better able to handle thin, low angle edges without chipping. And they can be heat treated to higher hardness to help prevent edge rolling and deformation, while still maintaining good toughness. This means that, indirectly, higher toughness can lead to better cutting performance because of the possibility of thinner edges.
The good news is that CPM Magnacut has been copied on CPM 4V behavior.
The K390 Delica has always been a monster of pocket knife (click on the name to go to my old review of the Delica with buffed sprint alloy). The thin blade mixed with the super tool steel allow (K390) alloy has proven to be amazing for hardchore. From their Seki Japan plant, Spyderco is producing many different K390 model, folders and fixed blades. The Stretch 2 being highly regarded as one of their best design.
So here you got an incredibly tough, strong and wear resistant blade on scales produced by Lynch. A typical Sal Glesser design: performance first !
But Lynchnw has taken that game to another league with their scale:
“A few years ago Casey put out a very limited run of the LynchNW MOD 1 Delica 4 and some scale sets. This is our newest Delica MOD 2 Titanium Scale Kit, modifying your choice of Delica 4 Knife with a set of Custom Titanium scales, featuring a forward finger choil, blade profiled scale holes, smooth bellied profile, a custom titanium back-spacer, enlarged lanyard hole, and a custom designed deep carry titanium clip. ” To quote Lynchnw.com site.”
What bring these new scales apart of adding titanium for the pure neo industrial look of it ? It bring many things:
A finger choil. A real one.
A longer handle and your pinkie will thank you for that.
A slim package which is soft on your pocket trousers.
Seven holes which are showing the edge of your knife when it’s closed.
See how cute is it ?
So here we got a very friendly city pocket knife which is not screaming “I’m a sword from Hell !!” like my new beloved Hellboy Chief or this AFCK in M2.
It looks like a lady and gentleman knife. But beware of the wolf in sheep’s clothing.
This one share the same core engine as a Police 4: K390 at 65HRC in a thin geometry ! It is a Metropolice knife.
The Amphibian Milestone in CPM Magnacut iq PARA MILITARY® 2 SALT® BLACK G-10 CPM MAGNACUT® BLACK BLADE – C81GMCBK2 which is much too long to fit in a title.
This is not my first Paramillie 2, I usually wear the 52100 carbon fiber version but I have used many many version in S90V, CPM Cruwear and S30V. The 52100 is actually the exact opposite of this new version. Announced at the 2023 Amsterdam Minimeet, a Paramillie impervious to the element. Better: a nautical version ready to stand tall in frond of the salty waves of the ocean’s breakers. Then the wait began.
And here it is, in all its glory ! Delivered with Larrin Thomas dreamlike alloy: the CPM Magnacut ! A steel which hits a lot of sweet spots. Like some sort of totally rustfree CPM M4: strong, resilient and able to withstand thin edges without chipping. So why adding a DLC on that alloy ? Overkill can be fun, can’t it be ?
Here are 3 versions. The 52100, the CPM Cruwear and CPM Magnacut from right to left. Three excellences in their own way all designed by Sal and Eric Glesser. CPM Magnacut is a story of love. Quoting his metallurgist of designer: “The carbide structure of MagnaCut is much finer than the common powder metallurgy stainless steels such as CPM-154, M390, Elmax, S35VN, etc. The only stainless PM steel I have imaged which is competitive in terms of carbide/nitride size is Vanax. MagnaCut is even somewhat finer than CPM-4V and Vanadis 4 Extra, the non-stainless steels that MagnaCut was modeled after. This is an excellent result and should lead to excellent properties.”
Quoting Spyderco: “This tour-de-force expression of the Para Military 2 showcases a full-flat-ground blade crafted from CPM MagnaCut—a state-of-the-art particle metallurgy steel that offers an exceptional balance of edge retention, toughness, and superior corrosion resistance. Cloaked in a non-reflective Diamond-Like Carbon (DLC) coating, the PlainEdge blade is housed in a handle featuring peel-ply-textured black G-10 scales machined with the signature Caribbean Bi-Directional Texture pattern of Spyderco’s US-made Salt Series knives. To complement its blade steel and finish, the knife’s nested stainless steel liners, four-position pocket clip, and all other hardware are also made from ultra- corrosion-resistant materials and black coated.”
That new Salty Paramillie is destined to be an amphibian workhorse, an hippocampus !! All hardware is black coated but the stop pin which is silver and made of “fearlessly corrosion-resistant marine-grade materials“. The handle (as efficient it is to be non slippery) is destined to be a pocket shredder as it is carved to be used with wet oily hands. Your trousers will suffer !! Unless, like myself you are a compulsive user of sandpaper. And even then, it will be hard on pocket’s lips.
The Diamond Like Coating is not only protecting a blade which doesn’t need any protection, it gives a strong Mall Ninja vibe also. Usually coating brings some king of lubrification to the matter separation. I’m not impressed so far, even on sausages. The geometry is perfect on my PM Salty. Thin as a razor though.
One thing I had to change was the clip. It was replaced by a Flytanium Universal Titanium Clip which is short and deep carry. Also I have moved the clip for a Tip Up carry which suit the Paramillie better in my book.
Of course de-shouldering the edge is the first step to convex that I do on new knives. Especially I have read that Magnacut loves leather stropping.
And this is true ! The edge turned quick into a über razor state.
It zipped through meat like a lightsaber into banta meat.
So now the game is on. The Salty Magnacut Paramillie is ready to kick all other knives from my pockets and be used on the long run. Let see what this cutlery apogee era knife has to propose on the long run !
Behind the code “SC28FP2WK390” is hidden one of the gem designed inhouse by Sal Glesser. The Dragonflies are legion. (All those green texts are actually links)
Quoting Spyderco: “The Dragonfly 2 is one of the most size-efficient folding knives ever created, especially when expressed with a straight-edged Wharncliffe-style blade. When that blade is crafted from tough, wear-resistant K390 tool steel, the result is a compact, powerhouse cutting tool that will take and hold an exceptional edge.
Like the standard Dragonfly 2, this knife also features a user-friendly back lock, and a reversible deep-pocket wire clip, but its linerless FRN handle is molded in the signature blue color of Spyderco’s K390 family of knives.”
The Dragonflies are very small locking knives which has been made in many many ways: stainless steel handle, Salt rustproof serie and many Sprint Run is now offered in Wharncliffe blade shape with one of the best super tool steel available K390. Such a strong steel on a small thin tool is a must try. Wharncliffe blades offers such a great performance. I have reviewed it many times. Backlocks or Lockbacks are known to be the strongest lock available and by design you are chocking the blade by the hum and the choil and you are applying your cutting force directly to it and not to the handle, preserving the mechanism for harder chores.
The handle despite being reduced is for 4 fingers grasp. This is a tour-de-force in term of design.
My Pingo features a thicker blade and, with its slipjoint mechanism, has proven to be a truly reliable everyday companion.
The Dragonfly, on the other hand, offers a more aggressive cutting solution in a more compact package.
The Wharncliffe blade design really excels on the plate: only the tip makes initial contact, which helps preserve the edge from harsh contact with ceramic surfaces. As a result, this small knife can even serve as a very capable, compact steak knife.
As my friend Jur once told me, “The older you get, the smaller the knives you’ll prefer.” Over time, I’ve come to realize just how true that is.
The Dragonfly in K390 is a remarkably refined combination. Ultra-compact, slim in the pocket, yet equipped with a blade that performs far beyond its size, it delivers impressive cutting power and edge retention in a minimalist format.
Lightweight, discreet, and highly capable, it’s the kind of tool that quietly earns its place as a daily companion — equally suited to a lady or a gentleman who appreciates precision and performance in a compact form.
Article written by Nemo Sandman – Edited the 5th of November 2025. All rights (pictures and text) reserved.
Have you ever wondered why so many Spyderco Sprint Runs seem to appear out of nowhere, featuring gorgeous carbon fiber handles and impressive CPM S90V blades?
It’s simple — Sal Glesser loves both materials.
For him, carbon fiber reflects his lifelong passion for motorsports, while S90V stands out as a stainless steel in a league of its own, combining high performance and outstanding reliability.
So, long story short: Full Flat Grind + Carbon Fiber + S90V = Sal Glesser’s favorite combo!
And to quote my friend Spydercollector:
“When the Bushcraft fixed blade was first announced, Sal also planned to do a so-called NASA version; a version of the Bushcraft knife with all high-tech materials. I believe NASA is a protected name, but Endeavour still evokes the high-tech approach most people associate with the famous space agency. The Endeavour features a full flat grind S90V blade and full sculpted carbon fiber handles. It was a beautiful knife with a grip that had me looking around for stuff to cut.”
Here is the Proficient: it is designed by wilderness expert Chris Claycomb of Bushcraft UK, the Proficient functions perfectly with traditional bushcraft skills and cutting methods. Carefully contoured and polished to eliminate hot spots and ensure maximum comfort during prolonged use.
Bushcraft knives are defined by specific parameters — typically featuring blades between 4 and 6 inches. Spyderco’s Bushcraft model fits perfectly within that tradition: a 4-inch, full-tang blade with no handguard, purpose-built for control and versatility.
In true Bushcraft spirit, users generally favor high-carbon tool steels over stainless options, prioritizing edge retention and cutting performance rather than corrosion resistance. The O-1 tool steel used here, with its high carbon content, delivers excellent long-term sharpness while remaining easy to resharpen in the field.
Carried on the belt or strap in a leather sheath, this knife is blueprinted for wilderness chores — slicing, chopping, whittling, and processing game — all in the traditional Bushcraft style.
To quote Spyderco: “The Spyderco Proficient takes the concept of the traditional “do-all” bushcraft knife and elevates it to new levels of performance with state-of-the-art materials and manufacturing methods. Designed by wilderness expert Chris Claycomb of Bushcraft UK, the Proficient functions perfectly with traditional bushcraft skills and cutting methods while offering superior durability, edge retention, cutting performance, and corrosion resistance Instead of traditional carbon steel and an axe-like “Scandi” (Scandinavian) grind, the Proficient’s blade is crafted from vanadium-rich CPM®S90V particle-metallurgy stainless steel and boasts a full-flat grind for low-friction cutting performance.“
This concept of a stainless blade paired with a black polished handle has, ten years later, been fully embraced — a perfect example being the Casström No.10 Swedish Forest Knife in Black Micarta with a 14C28N flat grind.
I first discovered CPM S90V back when it was still known as CPM 420V, thanks to Darrel Ralph (RIP) and his beautiful Apogee folder. The blade was astonishingly wear-resistant — so much so that, without diamond abrasives, only a backstand could bring it from dull to sharp. It was a bear to sharpen then… and still is today.
The difference is, as end-line users, we now have easy access to industrial diamond tools, making steels like S90V finally practical to maintain at their full potential.
I have written a lot about S90V. This alloy has proven it can be tough enough as a stainless steel to be used in any all terrain tools; especially since it is available on Manly folders which got the reputation of using a very fine thin geometry on their blades. Modern Bushcrafters (like the Benchmade Puukko) are focused on toughness with the use of the very tough CPM 3V.
What does CPM S90V bring to the table?
It’s incredibly wear-resistant. This steel is notoriously hard to dull, even when cutting abrasive materials like brown cardboard loaded with silica. It keeps its edge far longer than most steels, making it ideal for demanding, real-world use. Also the full flat grind is a must in a matter separator specialized in wood works. As much as I love Scandi Grind found on Woodlore clones (first designed by Ray Mears). I have found that especially in the wonderful Spyderco Sprig full flat ground knives can be really efficient on hard wood. (BTW when the writing appears in green: it is a link !! and I have tested them here.)
It’s stainless! Even if you (like me) enjoy the patina that forms on a great carbon steel blade, there’s real peace of mind in using a reliable stainless steel — especially when working near water, in the rain, or by the sea.
The Sprig was an impressive tool in terms of pure geometry. Designed as a hunting and fishing knife, it was a real wood eater — a beaver of a blade, cutting deep and effortlessly.
Guess what? The Proficient shares the same profile, especially after a bit of convexing — which I’ll be covering soon in a second article.
So far, that contoured handle is an absolute delight to use, and I’ll be putting it to the test in the upcoming piece. While the old O1 Bushcrafter had enough heft for light chopping, the Proficient excels at powerful push cuts — a completely different experience.
Interestingly, the Proficient isn’t a big knife. Once sheathed, it can disappear into the front pocket of a pair of denim jeans — no need to let it dangle from a belt. So what do we got ? Imagine the plateforme of the Bushcrafter (link) a solid companion, a reliable 4×4 and you just turn it into some Urus from Lamborghini: stellar alloy and lighter tougher handle. The Proficient is Sal Glesser’s gambit — a bold move in a world where the bushcraft community traditionally favors carbon steel and natural wooden handles. This knife dares to break from that norm.
Of course, this jewel comes at a price, and most bushcrafters aren’t Wall Street sharks. They use Opinel, Mora, or at best a €100 fixed blade — unless they’re ready to splurge on an original Woodlore.
So, the “stealth wealth” of this NASA-grade bushcrafter isn’t for everyone. It’s like a Lamborghini — not the most practical, but a statement of refined performance and engineering excellence. Because in the end, real performance comes at a price.
Article written by Nemo Sandman – Edited on November 5th, 2025. All rights (pictures and text) reserved.
NemoKnivesReview 