Six years ago, my friend Valter Nencetti took my Walker for a one year mission which turned into a six years journey. It was his favorite knife for hunting and he reported that to me in this article: https://nemoknivesreview.com/2012/12/30/spyderco-c22-in-zdp189-italian-hunter-update-by-valter-nencetti/
This year, he has given it back to me after I had offered him my Native 5 in 110V which is IMHO an upgrade for Hare Hunting. The Backlock of a Native 5 is a perfect lock for that kind of use, but you can notice the Walker lock as not travel very far. The curved concave notch prevents it to go further.
There is absolutly no play !
For the record skinning hares is not an easy task for an edge as the hairs and the skin are ruining the sharpness very fast. There is a lot of dirt which acts as abbrasive. I have made a video and soon will put it on line.
Being used everyday, Valter eventually broke the clip which is a very fragile part of the walker compared to spoon clips used noawadays in spyderco line. You can also see it was not clean everyday and used as an EDC in the countryside of his beloved national Park in the North of Florence in Italy.
You notice the normal wear on the handle but Carbon fibers is incredibly sturdy as an slob material. It can be easily cure with some 1000 sandpaper work.
There were also no pitting on the blade or on the liner lock. ZDP189 is known for pitting strangely with its 3% of carbon and 20% of chromium. But here anyway, no issues.
I have started to clean the marks on the blade with some sandpaper.
Then I have restored the edge to razor.
No chipping.
No pitting.
No blade play.
No marks on the handle.
A broken clip.
Valter used his knife with no afterthoughts. I know it was not used on wood but mainly as a skinning tool. It has processed hares but also been used on boars and deers. Also it was used on plastic and everyday mondane tasks as Walter is breeding hunting dogs.
That’s not bad for a little gentleman knife which is a true workhorse.
I had ordered a titanium deep carry clip for my 
So here it goes ! 
I’m always amazed at how thick the blade is and how solid this little folder is after one year without real maintenance. I have found the scandi S30V quite easy to maintain razor sharp and to my surprise it is easy to keep that way without any convexing and losing the “zero ground” scandi edge. But the best thing about the Wolfspyder is how hard
Easy to carry and easy to reach in the pocket. This one will be in my pocket for a trip in Norway very soon ! The Scandi ground little big knife in Scandinavian territory ! 
This is a quick glimpse at yesterday’s hare hunt. Which will be the support of future reviews and 
Morning ride in the Italian Mountains. 
Hunting dogs equipped with GPS collars. 
It has all started when I wanted to review the Spyderco Gayle Bradley Junction. It’s a great design for an EDC fixed blade which can be used for everything. Easy to carry in its pancake constructed bolteron sheath. But the edge was just too thick for my own use. 
To my knowledge, SPF27 is some kind of CPM D2 steel. A lot of carbon 1.5% and not a lot of chromium around 12%. Not the easiest on the stone as a semi stainless. It was not very soft under the diamonds compared to another blade in N690 HRC59 I got with me. And it was not really easy to remove the shoulder to create a gentle convex edge. Patience… In sharpening is important. And I often lack of it but I was able to improve it. 
Next some black stone mostly to remove the scratches. 
And then the white ceramic to get a better finish and a razor steel. 
You can notice the chamfered signature hole on the Junction. A première. The cuts were deeper. It was better! Much more enjoyable. 
But the spine was too sharp for my thumb and diamonds came handy to rounded the angles. It would never be a Sebenza spine…. 
Again the control during whittling was much much better. One should never be scared to round the edges for suiting your own needs. 
The handle is very flat on that knife. It’s an attention for people who wish to stash their knife in a pocket or a backpack without leaving a print. 
But a flat knife is not the most comfortable in the palm of your hand… Especially when cutting hard things for a long time. 
I decided to make a quick comparison with the Spyderco Sprig which is a pleasure to use. 
You can notice how the Phil Wilson’s Sprig got a thicker handle. And it change everything when cutting hard things. Also Phil Wilson’s is all about performances. Its geometry is stellar. 
It immediately cuts deep in wood without any real improvement needed…. 
But diamonds were there to be usef. 🙂 
I was able to get thin regular cuts into the wood. So I have decided to try the diamonds on the Gayle Bradley Bowie I have brought with me. This one got a thicker geometry and is made if the same pulverized alloy as the Junction 
You can always improve an edge. 
Used as a light chopper it worked just fine. 
Gayle Bradley has provided a great compact Bowie which can be used as a light camp knife. 
You can see: it’s not a lot bigger compared to my Ed Chempp Bowie. 
And the edge once thinned is honorable. 
Of course it is not as thin as my Pekka Tuominen Urban II for example. And not as aggressive as the Sprig… 
I got…. too much knives on my table… 
An Francesca knows how to prepare the pasta with pomodori. 
Crostini a la Toscane. Poultry liver, oignons, red wine, bread and a Bowie. 
Also the Delica was able to cut from the ricasso to the point without any hard pressure. In the end, I had noticed that the Junction was less good than the Sprig and the Delica was still the best whittler in the batch. No matter the steel, for wood cutting, geometry is queen. So I have taken my Bowie back to the diamonds and put a keener edge. Tomorrow it will be hunting day. 
NemoKnivesReview 