Tag Archives: Spyderco

Review

Spyderco Tenacious C122GBNM4PS – CPM-M4 with Serrations – Pure Workhorse

6 Comments

I’ve been tenacious — truly tenacious — in resisting the C122 Tenacious, even though I’d had my eye on that folder since 2008. After 17 years of flirtation, I finally ordered one. Why the delay? Its main weakness was always the less-than-stellar steel compared to the high-end knives I already owned.

Now, the CPM-M4 version is here to quench that long-standing thirst.

I don’t have much memory of a CPM-M4 serrated edge, except with another Eric Glesser design: the Dodo Exclusivefrom Blade HQ (C80GM4S). The Dodo was a real wood slasher — its S-shaped blade trimmed vines deeper and faster than almost any other, and the comfortable handle was perfect for power cuts.

Opportunities to play with a serrated CPM-M4 edge have been rare — until now. Here it is.

Back in 2008, when the Tenacious have been released it was a success.

Eric Glesser’s design was appealing to many for a simple reason: it was a well-thought-out, tough workhorse knifeavailable for around €30 (or less). A true blue-collar tool — built to be used and abused, like a modern-day Buck 110 for the pocket.


The best thing about the Tenacious was that it offered a thick, sturdy, well-built liner lock at a time when liner locks were falling out of fashion. Easy to display, easy to use, this no-choil, long-edge, compact working folder from Eric Glesser was a hit — and one of the best ways to catch the Spydervirus.


Now there is a FRN version in CPM S35VN. But it is as heavy as the G10 version and I’m not really a fan of FRN… Even if I absolutely love the FRN scales of my Serrated Chaparral.

I remember Bushcrafters being the first to sing the praises of the Tenacious. An example:

“I’ve thrown it, dropped it, batoned wood as thick as my wrist, chipped the edge multiple times (didn’t think 8cr13mov could chip, thought it was too soft but was wrong), I’ve left in outside ONCE in the rain overnight because I forgot I placed it on my front porch the previous day, I have spine whacked it (just don’t, I most likely have an impulse problem… lol … same problem that causes me to buy a lot of knives) I’ve dug holes, stabbed the ground to cut weed roots out, and much much more...

I think by now you get the point. I treated the tenacious as if I got it for free and had 1000 more to replace it if something happened. I treated this knife as if I hated it.

The result? 4 years later, the Tenacious opens smoother than it ever has, not a speck of rust since I purchased it, I have oiled the blade a couple times but I can guarantee it was less than 20 times total in the last 4 years, lockup is a bit less solid, BARELY any blade play from side to side, even less blade play from front to back, g10 scales look smoothed over and scarred, but to be honest there is still plenty of traction.
All in all, this knife is much more than what most of you need from a folder.”

My Persistence experience was excellent as described in my 2012 review (green words lead to link) but eventually I was disappointed with their steel. 8Cr13MoV can get sharp but lose sharpness much too fast for my uses. It was frustratring. I still got 8Cr13MoV knives like the Clipitool which is a great oyster knife. 8Cr13MoV is tough for a stainless steel, no surprise it was chosen for the Tenacious line.

The Tenacious is a sturdy well made liner lock folder with a super tool steel blade.

“This remarkable expression of the Tenacious® elevates this best-selling design to all-new heights with a blade crafted from American-made CPM M4 tool steel. Produced by the particle metallurgy process, CPM M4’s sophisticated alloy composition, high vanadium content, and extremely fine grain structure give it exceptional wear resistance and toughness-properties that translate to outstanding edge retention and impact resistance in knife blades. This knife’s full-flat-ground blade is available in both PlainEdge™ and CombinationEdge™ formats and is housed in a handle featuring brown peel-ply-textured G-10 scales.“

I have written many reviews about that fabulous alloy CPM-M4 it has never disappointed me and since I have sold my CPM-M4 Military and kept my Yojimbo 2 and Mantra 2 (reviewed and sharpened by JD) and use them hard, I know it is reliable and get a nice patina.

A lil’oil will prevent rust. CPM M4 is not 52100 and the patina will come slowly after cutting some lemons…
“CPM M4 has good edge holding, sharpening ease, toughness, strength, and is not a rust monster…” to quote Rangodash.

Now a blade is 1/3 steel, 1/3 Heat Treatment and 1/3 geometry.

The Coke butt bottle pushing cutting test has been done with the factory edge right out of the box. It is thin behind the edge.  It’s a good blade thickness for more nuanced jobs, but there is added strength from the thicker spine. 

The knife sliced right in the middle were the materiel is thicker.
This is just outstanding !

There are a great geometry and a thin edge on that tough CPM-M4 blade. The result is a sturdy matter separator.

It is not an exploit to cut into some tin can but the same “shallow”, “non snaggy” kind of serrations as the Chaparral made it easy.

Again, this is a “performance oriented” knife. The blade is not too thick like some “tactical” toys. It is made to perform not to show off.

“For notching, serrated edges work great. Feathersticking, maybe, maybe not. Serrated edges are ground on the show side, so they actually work better when used left-handed for cuts like that. I carry a serrated K390 Police4 all the time for rough work. It goes through little volunteer elm trees like a chainsaw. A SharpMaker makes it a breeze to maintain the edge.” to quote Yablanowitz.

The liner lock is thick in the same spirit of Gayle Bradley’s folders.
The knife opens with a loud KLAK! — no blade play in any direction. The detent is strong but slightly “elastic,” meaning the blade moves a little before the release/tipping point engages. This makes it very secure, with no risk of accidental opening. I’ve noticed the same elasticity on the titanium version of the Tenacious. It’s important to note: this is not a weak detent — the blade won’t open without a deliberate, serious force.

Using the knife in Spyderdrop mode, a flick of the wrist catches the blade in the Spyderhole with no issue. Closing remains perfectly secure. There’s a tiny squeak out of the box, but a few drops of nano oil should mute it. The action isn’t buttery smooth like a compression lock on ball bearings, but after a bit of breaking-in and running-in, it will be wonderful.

The solid clip is delivered mounted in Tip Down carry, which suits well this knife for the Spyderco Drop featured on the Military 1 which got the same kind of “around the pivot” clip.

I have no intention of using tip-up carry or a deep-carry clip. This knife is a tool, meant for easy access rather than a stealthy edge. The Tenacious is always noticeable in the pocket, but that sturdy clip guarantees quick availability — reminding me of Massad Ayoob’s teachings.

Spyderdropping is an extremely fast way to get the blade into action — faster than many switchblades. Sal Glesser was already demonstrating this skill almost 30 years ago: grab the knife by the Spyderhole and SCHLAK! — it’s open and ready to cut.

The Tenacious features full steel liners, unlike the nested liners on the Military line. There are no backspacers, making it easy to clean under running water. At 120 grams, it’s not a lightweight folder — I appreciate a bit of heft on a working tool. (For reference, the new titanium version is 93 grams.)

Notice how perfectly centered the blade is right out of the box. The quality control on this “made in China” folder is impressively high.

(Sal’s Titanium Catbird (only 200 were made) next to Eric’s Tenacious.)

Eric and Sal have taken their time with the Byrd Line and their budget line to get the best from a family of makers in China. The Glessers have moved slowly but steadily, developing a trustworthy and excellent relationship with the knifemakers there.


To quote JustinRose40 on the forums in 2011:
“Yes, every time I show someone my Tenacious I have to say “well it’s made in China but it’s not a China Knife, it’s still a Spyderco”. To which they usually say something like, “yeah I could tell that as soon as you handed to me”.

Since 2011, China has made huge leaps in knife manufacturing quality, and this steady improvement is clearly noticeable in the “new” rendition of the venerable Tenacious.

On Eric’s designs, there’s sometimes no choil, but you can notice a clever feature: a “proto-flipper” that acts as a quillon or guard to protect your fingers in case the lock ever failed.

Since 2008, I haven’t heard of any critical lock failures on the Tenacious or the larger Resilience. The Tenacious has earned its legendary status for a reason.

Another Eric design with an excellent blade-to-handle ratio is the Mantra 2, which uses a flipper. (I’m not a fan of that little opening hole — dirt always collects there!) Still, it’s a great design. The Mantra 1, with an opening hole, feels like the Taichung-made “uncle” of the M4 Tenacious.

The peel-ply-textured G10 scales don’t need sanding; they’re well balanced and won’t shred pockets. The brown color makes it feel less threatening, in my book.

Let’s put it to use while the satin blade is still silver.

The knife bites into wood like no tomorrow. The serrated CPM-M4 edge is a joy to use — it goes deep and steady, putting a smile on my face every time.

Blast from the past: the last combo-edge/semi-serrated knife I used was over 20 years ago — a Pre-Production D2 AFCK. As you can see, it’s been heavily used, and its geometry, steel, and blade-to-handle ratio aren’t nearly as refined as the Tenacious.

That macro shot shows the very smooth way to go from chisel ground serrations to plain edge.

“Serrated edges aren’t for everyone, and you may not like them, but you’ve got to get at least one just to try! Keep it around for nasty work, wet abrasive rope, zip-ties, yardwork, or playtime like in the pool, or at the lake or beach. Not to mention fishing duties.” to quote Benben.

The difference in cutting efficiency between a saber grind and a full flat grind is obvious. I don’t need to tiptoe around it — the advantage is clear.

Now let’s compare the Tenacious with various folders and fixed blades.

The Tenacious got a better blade/handle ratio than the Paramilitary 2 and a longer blade for a shorter handle. This is one key of the success of that design.

Almost the same length as the Chief.

No choil on the Wolfspyder too.

Since I play with Bushcraft here a nice combo to go in the wood. The Proficient is a masterpiece.

And with the ultra solide Boker in Magnacut. The 8,6 centimeter long blade of the Tenacious is generous edge wise.

Of course, I’ll strop that partially serrated blade on leather — no fear at all. I have my method for serrations, using the corner of the leather pad.

Maintaining the combo edge won’t be an issue; I’ll keep it sharp with cornered ceramic and jade stones.

So what do you get for €139 — the price I paid at the Coutellerie Champenoise? I’m really happy with my purchase. I plan to use the Tenacious a lot and on anything, simply for the pleasure of testing it on various materials. This knife isn’t afraid of plastic, wood, food, bones, cardboard, or aluminum.

This CPM-M4 version is set to show the full potential of one of the beefier EDC knives, especially with its serrated half-edge carved from super tool steel. Over 17 years, the Tenacious has proven it can withstand a lot of abuse.

  The CPM-M4 Tenacious is not only a workhorse but a warhorse, like the pictured Adamas. I can easily imagine any soldier being glad to have such a reliable knife at this budget.

It’s slightly larger than small pocket knives, but smaller than the oversized ones some carry just to show off. The Tenacious would make an excellent day-hiking knife — a folder ready for the great outdoors. I’d take it on a trip to Africa or on a photo safari in the natural parks of Tuscany.

(this will often dull the blade’s edge with a little shining spot. Not here… Thanks to the serrations again ! )

This CPM-M4 Tenacious is sold at roughly double the price of the standard version, but in my opinion, it’s a rare chance to have this alloy on that knife. CPM-M4 pushes the boundaries of reliability and is a real pleasure to keep razor-sharp.

CPM-M4 will not chip and stays sharp for long. It’s a steel that has been used in cutting competitions. While Tuff Glideand various oils can keep it spotless, I prefer the protection of a gentle natural patina.

For twice the price of the vanilla Tenacious, this upgraded version delivers another level of performance in terms of toughness and edge retention.

“Old school cool with the Walker lock and satin finish. Well done Eric Glesser!” to quote Clay H on the Forums.
My brown Tenacious looks gorgeous in its “beautility”, practically begging to be used across all terrains — sand, rain, or more. All in all, this beater is a beefed-up workhorse, built to be used hard and carried proudly.



Review

Spyderco Chaparral C152SGY – For the Fierce and the Furious

3 Comments

Like I had mentioned in the glimpse review of the Serrated Chaparral, this little, thin folder is built to punch above its weight. Thanks to its sturdy construction and relatively strong stainless steel — the same type found on my Cold Steel Recon 1 XL — it can be tested and used like a much larger knife without compromising performance.

Solid steel, sturdy lock? Not much difference from a larger knife, in fact. 😉

So far, I’ve put the knife through its paces, cutting anything I could, and maintaining the edge with some Jade stones (see first picture). The mechanism shows no signs of play in any direction — rock-solid performance.

The plastic is thicker that the blade.

As you can see, the serrated edge is a chisel grind, which means it tends to deviate slightly to the right of the material being cut, much like a fin in water. I started the cuts with a bit of sawing, then transitioned to push cuts, and the knife effortlessly sliced through the thick plastic used to form the bottle.

This little knife is fierce in term of cutting performance. It is a lot of power in your pocket ! It is a pocket chainsaw !

The serrations really shine on the plate. You can push the knife hard against ceramic surfaces, and if the points ever need a touch-up, a few passes on a ceramic corner — or in my case, a jade corner — brings them back like new.

I have been able to reach razor level just by passing gently the Jade on it.

Actually it is fun to enhance the edge.

Actually, this is a bit of a comeback for me with serrations, dating back to my AFCK experience 25 years ago. Back then, I mostly used partly serrated edges, which helped initiate cuts on hard materials.

With a fully serrated thin blade and no plain edge, I initially wondered how useful it would be in the kitchen — especially since my wife’s favorite knives are Victorinox fruit knives (serrated). But it turns out, neither fruits nor vegetables can withstand the sharp, wavy edge of the Chaparral.

Funny enough I have been able to strop the edge of the Chap by using the side of the leather belt. CTS XHP is a steel which loves leather in my experience.

All in all, so far, so good. The Chaparral delivers impressive cutting power. Its thin, fully serrated edge is unique within the Spyderco line, pushing the design out of its comfort zone — and for a “knifeaholic” like me, that’s pure fun.

The next step is to trust this little knife enough to take it on a road trip in Italy — handling food prep, wood, and low-profile carry as my only pocketed folder. The Chaparral will make its return in May.

Review

Spyderco Roadie XL C267BK – Part II – Shattered Tip.

2 Comments

M398 is a fragile steel compared to M390. The encounter of the tip of the Roadie XL with a tile of my kitchen has been definitive. One mm has been shattered and now I got a micro flat screwdriver as a tip.
OK. Diamonds are steels best friend.
I’m able to form a new tip in a diamond shape.

For now I won’t baby that Roadie XL anymore. I decide to thin the edge.

The best way is to protect the blade to avoid any big scratches.

Then it is time to play with industrial diamonds.

I will also use some diamond rod to round the jimping.

Of course I’m enough clumsy to scratch the blade twice and I’m obliged to use some diamond paste to treat the surface.

Then some polishing paste on the leather to slowly makes it like a mirror.

I’m quite happy with the result.

Time to test this new geometry. The edge has been convexed and thinned it should cut much better.

One of the most difficult task is to cut in two the butt of a two liters plastic bottle. This is a test my Scandi blades fail all the time. Any Opinel is king in that. Or the Manly Wasp ! My favorite being the Nilakka.

As a whittler it goes deep in wood.

As a steak knife, the shape of the blade brings only the new tip in contact with the ceramic of the plate.

That new tip is strong enough to be able to pierce a metal lid of a green bean jar. A hole pierce help the release of the lid on some jar.
No damage no more.
Now the Roadie XL cuts much butter.

Review

Spyderco Roadie XL C267BK – Size matters

3 Comments

Six years ago, I reviewed the Working Poney, also known as the Roadie. Mine had been reprofiled by Jan Dirk, and even at its tiny scale, it proved to be an outstanding performer. For six years, it quietly stayed in my pocket, accompanying me across the UK, Vietnam, and countless places where knives were frowned upon.

Then, in 2024, I noticed the announcement of an XL version — the C267BK — featuring upgraded steel and a clip. Right away, I saw the new pointed blade, replacing the classic sheepfoot-style blade, now ground from Böhler-Uddeholm N690Co. Even more exciting, the XL uses M398, an exotic steel reserved for flash batches — a serious step up in performance and collector appeal.

And so, here it is: Ladies and gentlemen, the Roadie XL!

Back to the Roadie XL: it is made in Maniago, Italy, like my Nano and many other excellent modern knives. The Maniago factory remains one of the world leaders in precision and manufacturing quality.

Specifications:

  • Overall Length: 6.51″ (165mm)
  • Blade Length: 2.74″ (70mm)
  • Steel: M398
  • Closed Length: 3.76″ (95mm)
  • Edge Length: 2.31″ (59mm)
  • Weight: 1.5oz (43g)
  • Blade Thickness: 0.108″ (2.8mm)

Its shape and size make it extremely pocket-friendly, easily fitting into the watch pocket of jeans thanks to its deep-carry wire clip. You could remove the clip, but why? It keeps the knife perfectly secured at the pocket’s edge. The clip is also reversible, though that is not essential for a two-handed opening folder.

With its thin profile and light weight, combined with the clip, the Roadie XL can even be carried in a shirt pocket like a pen. In short, it is a knife designed to remain on you almost unnoticed.

The action is smooth, with two detents before the blade fully opens. In practice, it feels smoother than my Urban, which deploys with a single motion.

With a slightly longer blade than the Urban, the Roadie XL remains legal to carry in countries such as Denmark, the UK, or Germany. Mine arrived razor sharp straight out of the box, so I am not in any hurry to convex the edge.

Mine came razor sharp straight out of the box, so I’m not in any particular hurry to convex its edge.

You can immediately recognize Sal Glesser’s signature design — a clear mark of his inventive approach. Sal is an inventor at heart, and it is always impressive to see how he manages to create clever, practical tools. Quoting him directly:

“When the Transportation Security Administration (TSA) briefly considered allowing the carry of knives on airplanes again, Spyderco designed the Roadie™ to fit their guidelines. We created an incredibly popular modern expression of the classic penknife. Since bigger can indeed be better, the Roadie now has a big brother: the Roadie XL. It faithfully offers all the defining features of its smaller counterpart — including a non-locking “notched-joint” mechanism, a textured index-finger choil, and contoured, injection-molded handle scales. Its full-flat-ground sheepfoot-style blade is crafted from M398 stainless steel and features our distinctive “Double Dent™” — a pair of symmetrical dimples in the blade that provide a solid purchase for fingernail-free, two-handed opening. In addition to its larger size, the Roadie XL also adds a deep-pocket wire clip for convenient top-of-the-pocket carry.”

Now, let’s talk about M398, one of Spyderco’s premium powder metallurgy steels, produced in limited flash batches in Maniago, Italy.

From what I understand, M398 is closer to CPM-90V than to M390. Quoting Darrin Thomas’s analysis:

“The original M390 has a reported carbide volume of 20.5%, and the new M398 has about 30%, so there has been an increase in carbide of almost 50%… [text unchanged] …”

When M398 was used in a previous flash batch for the SpyMyto, I was not particularly excited — it felt like overkill for a folder intended for hard use. The Myto is essentially the big brother of my Nano in CPM Magnacut, and a SpyNano in M398 is also on the bench. In comparison, Magnacut is far tougher than M398, making it better suited for wider, workhorse blades.

On the Roadie XL, however, it is a different story. Like with my Heinie Urban in S90V, these small blades are not intended for bushcraft — although skilled users can achieve remarkable results even with a 2-inch slipjoint, as shown in an inspiring video I recently watched.

Slipjoints are gentle companions for both ladies and gentlemen. For those with long nails, the Roadie XL features its distinctive “Double Dent™” — a pair of symmetrical dimples in the blade that provide a secure grip for fingernail-free, two-handed opening.

Its high wear resistance is useful, as these small blades often encounter cardboard, which can be surprisingly abrasive. I also recall Roger, my father-in-law, using his old Pradel slipjoint like a crowbar or screwdriver without hesitation. Older users often treated knives as true tools until they were worn down to almost nothing.

I am confident the Roadie XL, with its M398 blade, would make an excellent hare skinner — fur full of sand can destroy an edge very quickly. Tuscan hare hunters would likely appreciate its durability. The high wear-resistant alloy makes perfect sense here, and the blade is also relatively thick at 2.8 mm, reducing the risk of damage.

Ergonomically, the Roadie works beautifully for a slipjoint because you can use the choil for control — a feature rarely found in traditional designs. Even most Swiss Army Knives do not offer that level of security. As Spyderco notes:

“Unlike traditional penknives, the Roadie also features a subtle index-finger choil that increases control of the knife during use and acts as a safeguard against unintentional closure.”

There is no undue pressure on the pivot, often the most fragile part of folding knives. If you avoid twisting the tip in wood, the Roadie XL can handle direct cutting force on the blade. This makes it another “Lil Big Blade” — small, but highly capable.

It can serve as a steak knife, whittler, label remover, balloon popper, nail cleaner, or cardboard cutter. Cardboard is especially abrasive, but not for a steel like M398, rich in carbide content.

And in today’s world, one final advantage: it is extremely sheeple-friendly. It looks like a pocket knife, not a tactical weapon — discreet, elegant, and highly functional.

Roadie, K390 Pingo, S90V G10 Urban, and Roadie XL (all green links refer to full reviews).

Beauty is in the eye of the beholder, but to me, this blade — shaped like a scaled-down cutlass — is pure eye candy.

Interestingly, I can open it one-handed in two different ways:

  1. A quick wrist flick while holding the blade.
  2. By gripping the blade between thumb and index finger while pushing the handle away with the remaining fingers.

So even though it was not designed as a one-hand opener, the Roadie XL can still function surprisingly well as one.

Compared to a traditional sheepfoot slipjoint, the Roadie XL is incredibly light while offering a premium alloy blade. (Since August 2025, another M398 slipjoint has joined the lineup: the Metropolitan.)

At under 100 euros, the Roadie XL is an exceptional bargain for what it delivers.

This is one of Sal Glesser’s finest EDC designs — a perfect balance of elegance, utility, and performance. And for once, size really matters with a Roadie. No wonder it sold out so quickly on the Golden site!
Part II is here.

Review

CRICKET™ STAINLESS STEEL TATTOO

Leave a comment

C29T – “When You Wish Upon a Star”

I’ve known Jiminy Cricket since 1994. I even owned a pink version of this little bugger back in the last millennium.

Today, during a small pilgrimage to the famous Kindal cutlery shop in Paris,

Mme Kindal showed me one of the treasures on display, next to a Janisong and a titanium Military…

It was love at first sight for this blast-from-the-past little big knife. A compact piece with surprising presence—perfect for another New Old Stock adventure.

The Tattoo version of the Cricket is a true jewel—both to look at and to use. It has been cleverly designed in-house by Sal Glesser (though I wouldn’t be surprised if Ed Schempp also influenced it).

Based on the stainless steel Cricket platform, it is a beautifully executed piece of cutlery.

Folded, the C29T forms a smooth, rounded package that disappears almost completely in the pocket. The clip is tip-down (right-hand), but also works as a tie clip or even a money clip. The anodized artwork gives it a refined, elegant touch.

The stainless steel construction with a Chris Reeve Integral Lock keeps the knife extremely thin and easy to carry—even in a shirt pocket.

The tip-down carry allows a very fast and elegant Spyderdrop opening, bringing its reverse “S” blade into action instantly.

The 2 mm thick, 48 mm long blade is deceptively capable thanks to its S-shape. You effectively gain extra cutting edge length in a very compact format.

Like Eric Glesser’s Dodo, the Cricket is a geometric trickster: the cutting angle is rarely 90°, creating a sinusoïdal slicing effect. It is surprisingly powerful—hence its “little big knife” reputation in the Spyderco world.

The Cricket is a joy to use in the garden on tougher materials…

…and equally effective on softer ones.

But beware: that S-shaped beak loves to grab anything in its path. Your thumb included—so be careful, it can bite fast.

The beak penetrates plastic with surprising aggression, making package opening effortless.

Not everyone likes S-shaped or recurved blades. But this form is inspired by nature—claws, talons, beaks, and teeth.

Sharpened on a rounded ceramic and finished on leather, the Cricket easily returns to a razor edge (VG10 is not difficult to maintain).

Here I’m using a jade stone: I sharpen the belly on the flat and the beak on the edges.

The open design also makes it extremely easy to clean under running water.

I highly recommend the Cricket as an EDC knife. It is a small but powerful “matter separator,” ideal for both men and women in daily use. It can be clipped to a purse, a pocket, or even a bra.

I once knew a former French Marine—six-foot-four, heavily built—who carried a pink Cricket as his daily EDC. Go figure. That’s the kind of knife that truly makes you wish upon a star.

Folders, Review

The Perfect Spyderco Native Exclusive AKA Spyderco C41GPCWBK5 Native 5 Folding Knife 3″ CPM-CruWear Black Plain Blade, Smooth Black G10 Handles, KnifeCenter Exclusive !

1 Comment

Seven years ago, I was already in love with a KnifeCenter Exclusive Native. The idea of offering a smooth G10 handle was, IMHO, a great EDC enhancement, as aggressive G10 can quickly turn any knife into a pocket shredder.

As you can notice, the Native 5 with its OEM clip can perfectly clip into a watch pocket.

I was certain I had missed the opportunity to own one of those smooth operators made exclusively for KCI when Alex, a fellow member of the Facebook Spyderco Fan Club France, pointed it out to me.
They were still in stock! HERE!!

I have known monsieur Howard Korn, the founder of KCI, since his early beginnings back in the 90s when he was operating almost alone. He even suggested that I design their logo. Howard was among the very first resellers to offer knives on a large scale using a very new medium at the time: the World Wide Web! What a venture… and eventually, what a success!
That was before Amazon, and Howard remains one of the true pioneers in spreading cutlery culture worldwide. Hence the excellent videos now produced in-house.
Once again, it was a smooth transaction from the USA to France thanks to great customer service for a fantastic exclusive. I may be biased, but after nearly 30 years of dealing with KnifeCenter, my experience has always been flawless and inspiring.

Eventually, I found out that I may have bought one of the very last examples of this Native Exclusive because 10 days after my order (June 2024), they were already out of stock.

So what do we have here?

I have written a lot about CPM CruWear!
But this tough and well-balanced alloy, capable of taking a crisp razor edge, is perfect on both small and large folders.
This is a true workhorse steel and one of the greatest high-tech alloys available in modern cutlery. I have even demonstrated how difficult it is to force a patina onto it. This time, with the DLC coating, neither patina nor rust should be a concern.
BTW, DLC (Diamond-Like Coating) is even used for medical implants. It is not toxic.

This all-black version of the Native is ready to be used in all weather conditions.

So here we have a very low-profile package with a non-threatening design, because black knives matter when confronted with sheeple who might otherwise label you a mall ninja carrying a dark saber.

These days, I am reluctant to carry long blades or large folders in the city, and my search for shorter, socially accepted knives — locking or non-locking — has become obvious.
I have previously written about knives suited for city use, and the Native is definitely one of them. The idea is maximum versatility in a tool that should not raise eyebrows: a friendly, non-threatening package. The kind of knife my grandfathers and father used to carry without a second thought — except on airplanes. 😉
When heading into the countryside, I do not restrict myself in terms of blade length, but in big cities I play a very low-profile game and most of the time strictly follow the law, even if I am not particularly worried about police checks.
Hence the Native: the same cockpit ergonomics as Hellboy, which gets a lot of kitchen use now that the Chief has turned into a Chef, but in a shorter format.

There is also a swedge on the blade spine of the Native that is not present on the Chief.

The action is smooth with zero blade play, and a true guillotine drop can be achieved simply by releasing the lock. I have already written about how top notch these Golden-made Natives are in terms of fit and finish, having used them since 2011.

This linerless version is, to me, the best Native design ever produced, and this Exclusive represents the best of the best. In these years dominated by titanium frame locks and Axis-style locks, the opportunity to own a truly great lockback feels precious.
And this one, for me, is the Last of the Mohicans!

Folders, Review

Spyderco Native Chief: HELLBOY 2 – The Kitchen Army

5 Comments

Since the reception of my Chief Native I have found that he was a sole survivor from a Xmas Mystery Box bought in Spyderco’s plant in Golden in December.
In that box were different items and a rare Sprint Run Second Factory which was destined to end in my pocket and considered by myself IMHO as the perfect realisation of Sal and Eric ideas about pocket knives. In fact I think it is my favorite Spyderco ever.
I have written a first review here.
And now it is time for a second approach of Hellboy which has succeeded in kicking other knives from my pocket and quench my thirst for novelty.

So why ?

First the Native family feature an absence of hump on the blade making them very slick and beautiful.

Even the Shaman benefits from that.

The Chief is on the left and the Shaman on the right.

As you can notice the design of the Native Chief is really close to one of my favorite design: the AFCK.
Sal Glesser was no stranger in the Benchmade BM800 AFCK back in the 90’s. He helped Les De Asis founder of Benchmade on it. They had both learned how to make Michael Walker’s linerlocks at Bob Terzuola shop.
Both company were accelerating on the tactical lane in close formation.

As you can notice, my AFCKs (Advanced Folding Combat Knife) which was also designed by Chris Caracci a former Navy SEaL have been used a lot. The first version got a Spydiehole and the second version got an oval hole and an axislock.
This design was one of my favorite for a big folding knife as EDC.
And back then I was really in love with concept of tool highspeed steel on a modern plateform.

The same happend with that special Native Chief which got a very special alloy for its blade: CPM-4V.
With that steel, the edge is strong and the thin blade is very solid.
It gives a lot of confidence when cutting on a plate made of ceramic of glass. No chipping can happen.
Hellboy has been used a lot for cutting pies and cake on glass plates and the edge behavior was not disappointing. When I have noticed a little shiny spot, some white ceramic was able to put everything back on line but it was really minor.

Now CPM4V is not stainless. It will form a patina or, worst, rust very quick and easily when used in acidic matters like cutting lemons and being used on a salad with vinegar.
DLC coating is really welcome for that kind of behavior. Back in the 90’s Benchmade was offering only PVD coating which is really inferior to Diamond Like Coating. So far the blade of my Chief is not marked and scar by it various cutting tasks even when cutting.
My previous Chief was a naked Rex45 blade and it was another story told here.

Even strawberries can darken the edge of CPM 4V.

But cheese is a great way to notice how DLC is making the surface of the blade less sticky but more stinky.

The Chief was not always used on gentle medium like wood.

It was also used on plate with vinegar salsa. Here it is basamic vinegar from Modena.

In the kitchen the knife is really behaving like an paring knife. It is really handy on fruits and vegetables. Its very pointy blade is great to carve.
.The mechanism has never suffered from being wet and rinsed under water. The knife was smooth through and through its various wet works.

Now I like to have chamfered and smooth handles and blade spine. The Chief is known to be very square everywhere. The G10 has been easy to smooth with sandpaper used wet to avoid toxical dust.
Now the blade spine is DLC coated and it was my esthetic choice to remove the coating on all the length of its spine.

I love the result.

It has been done with some diamond rods.
Now the spine is much more confortable for my thumb in case of push cuts.

CPM 4V on that Native Chief platform is really the bread and butter for a strong thin folder. I’m not afraid to use hard on wood and plastic.
And it is a must in the kitchen various missions.
It has been also test on different hard wood and compared (geometry speaking) with many other knives I got.
One of my champion is the Swayback in term of smooth pushcuts.
But also the Wolfspyder and the Yojimbo.

My Chief needed more convexing and thinning to go to the level I was expecting. Again diamonds has been used handfree to remove the shoulder of the edge.
CPM 4V keeps a very very crispy edge and bites in the wood very aggressively.

CPM M4 is a stunning alloy which is prefered on fixed blade but it is a gem on a long and thin folder. It makes it super solid with a very permissive edge.

Quoting Larrin Thomas Phd:

Some will argue that toughness is not important in folders or fine slicing knives and feel that only edge retention matters in that case because they don’t use their knives in aggressive ways which are likely to lead to chipping. However, broken tips are still common on small knives and kitchen knives. And with higher toughness, the knives are better able to handle thin, low angle edges without chipping. And they can be heat treated to higher hardness to help prevent edge rolling and deformation, while still maintaining good toughness. This means that, indirectly, higher toughness can lead to better cutting performance because of the possibility of thinner edges.

The good news is that CPM Magnacut has been copied on CPM 4V behavior.

Folders, Review

Delica K390 with Lynch Titanium Scales – A Wolf in Sheep’s Clothing !

Leave a comment

I got the chance to get that customized Delica through Henri Ramsey, a Spydiefriend from the Facebook French Spyderco Fan Club.

The K390 Delica has always been a monster of pocket knife (click on the name to go to my old review of the Delica with buffed sprint alloy). The thin blade mixed with the super tool steel allow (K390) alloy has proven to be amazing for hardchore.
From their Seki Japan plant, Spyderco is producing many different K390 model, folders and fixed blades. The Stretch 2 being highly regarded as one of their best design.

The Blue Pingo has been made in Golden though.

So here you got an incredibly tough, strong and wear resistant blade on scales produced by Lynch. A typical Sal Glesser design: performance first !

But Lynchnw has taken that game to another league with their scale:

“A few years ago Casey put out a very limited run of the LynchNW MOD 1 Delica 4 and some scale sets. This is our newest Delica MOD 2 Titanium Scale Kit, modifying your choice of Delica 4 Knife with a set of Custom Titanium scales, featuring a forward finger choil, blade profiled scale holes, smooth bellied profile, a custom titanium back-spacer, enlarged lanyard hole, and a custom designed deep carry titanium clip. ” To quote Lynchnw.com site.”

What bring these new scales apart of adding titanium for the pure neo industrial look of it ?
It bring many things:

A finger choil. A real one.


A longer handle and your pinkie will thank you for that.


A slim package which is soft on your pocket trousers.


Seven holes which are showing the edge of your knife when it’s closed.

See how cute is it ?

So here we got a very friendly city pocket knife which is not screaming “I’m a sword from Hell !!” like my new beloved Hellboy Chief or this AFCK in M2.


It looks like a lady and gentleman knife.
But beware of the wolf in sheep’s clothing.

This one share the same core engine as a Police 4: K390 at 65HRC in a thin geometry ! It is a Metropolice knife.





Review

The Amphibian Milestone in CPM Magnacut : the Paramillie 2 Salt has landed !

5 Comments

The Amphibian Milestone in CPM Magnacut iq PARA MILITARY® 2 SALT® BLACK G-10 CPM MAGNACUT® BLACK BLADE – C81GMCBK2, which is much too long to fit in a title.

This is not my first Paramillie 2. I usually wear the 52100 carbon fiber version, but I have used many versions in S90V, CPM Cruwear, and S30V. The 52100 is actually the exact opposite of this new version.
Announced at the 2023 Amsterdam Minimeet, a Paramillie impervious to the elements. Better: a nautical version ready to stand tall in front of the salty waves of the ocean’s breakers.
Then the wait began.

And here it is, in all its glory!
Delivered with Larrin Thomas’ dreamlike alloy: the CPM Magnacut!
A steel that hits a lot of sweet spots. Like a sort of totally rust-free CPM M4: strong, resilient, and able to withstand thin edges without chipping.
So why add a DLC on that alloy? Overkill can be fun, can’t it?

Here are 3 versions. The 52100, the CPM Cruwear, and CPM Magnacut from right to left. Three excellences in their own way, all designed by Sal and Eric Glesser.
CPM Magnacut is a story of love.
Quoting its metallurgist and designer:
“The carbide structure of MagnaCut is much finer than the common powder metallurgy stainless steels such as CPM-154, M390, Elmax, S35VN, etc. The only stainless PM steel I have imaged which is competitive in terms of carbide/nitride size is Vanax. MagnaCut is even somewhat finer than CPM-4V and Vanadis 4 Extra, the non-stainless steels that MagnaCut was modeled after. This is an excellent result and should lead to excellent properties.”

Quoting Spyderco:
“This tour-de-force expression of the Para Military 2 showcases a full-flat-ground blade crafted from CPM MagnaCut—a state-of-the-art particle metallurgy steel that offers an exceptional balance of edge retention, toughness, and superior corrosion resistance. Cloaked in a non-reflective Diamond-Like Carbon (DLC) coating, the PlainEdge blade is housed in a handle featuring peel-ply-textured black G-10 scales machined with the signature Caribbean Bi-Directional Texture pattern of Spyderco’s US-made Salt Series knives. To complement its blade steel and finish, the knife’s nested stainless steel liners, four-position pocket clip, and all other hardware are also made from ultra-corrosion-resistant materials and black coated.”

That new Salty Paramillie is destined to be an amphibian workhorse, a hippocampus!!
All hardware is black coated except the stop pin, which is silver and made of “fearlessly corrosion-resistant marine-grade materials“.
The handle (as efficient as it is in being non-slip) is destined to be a pocket shredder, as it is carved to be used with wet, oily hands. Your trousers will suffer!!
Unless, like myself, you are a compulsive user of sandpaper. Even then, it will be hard on pocket lips.

The Diamond-Like Coating is not only protecting a blade that doesn’t need any protection; it also gives a strong Mall Ninja vibe.
Usually, coatings bring some kind of lubrication to material separation. I’m not impressed so far, even on sausages.
The geometry is perfect on my PM Salty—thin as a razor though.

One thing I had to change was the clip. It was replaced by a Flytanium Universal Titanium Clip, which is short and deep-carry.
Also, I moved the clip for a tip-up carry, which suits the Paramillie better in my book.

Of course, de-shouldering the edge is the first step before convexing, which I do on new knives. Especially since I have read that Magnacut loves leather stropping.

And this is true! The edge turned quickly into a über-razor state.

It zipped through meat like a lightsaber into bantha meat.

So now the game is on. The Salty Magnacut Paramillie is ready to kick all other knives from my pockets and be used long term.
Let’s see what this cutlery apogee-era knife has to propose in the long run!

Review

Spyderco Dragonfly Wharncliffe K390 SC28FP2WK390 – Roar like a Dragon, fly like a bee.

4 Comments

Behind the code “SC28FP2WK390” lies one of the gems designed in-house by Sal Glesser. The Dragonflies are legion.
(All green text in this review links to related articles.)

Quoting Spyderco: “The Dragonfly 2 is one of the most size-efficient folding knives ever created, especially when expressed with a straight-edged Wharncliffe-style blade. When that blade is crafted from tough, wear-resistant K390 tool steel, the result is a compact powerhouse cutting tool that will take and hold an exceptional edge.

Like the standard Dragonfly 2, this knife also features a user-friendly back lock and a reversible deep-pocket wire clip, but its linerless FRN handle is molded in the signature blue color of Spyderco’s K390 family of knives.”

The Dragonfly is a very small locking knife that has been produced in many variations: stainless steel handles, Salt Series rustproof versions, and numerous sprint runs. This version uses a Wharncliffe blade in one of the finest modern tool steels available: K390. Such a capable steel on such a small, thin blade is always worth experiencing.

Wharncliffe blades offer outstanding cutting performance, and I’ve reviewed them many times. Backlocks (or lockbacks) are among the strongest folding knife mechanisms by design. The hand pressure is transferred directly through the choil and spine, meaning the force goes into the blade rather than the handle, preserving the mechanism even under hard use.

Despite its reduced size, the handle still allows a full four-finger grip. This is a true tour-de-force of design.

My Pingo features a thicker blade and, with its slipjoint mechanism, has proven to be a truly reliable everyday companion.

The Dragonfly, on the other hand, offers a more aggressive cutting geometry in a much more compact package.

The Wharncliffe blade really shines in use: only the tip makes initial contact, which helps preserve the edge from harsh impacts on hard surfaces such as ceramic plates. As a result, this small knife can even function as a surprisingly capable compact steak knife.

As my friend Jur once told me, “The older you get, the smaller the knives you’ll prefer.” Over time, I’ve come to realize just how true that is.

The Dragonfly in K390 is a remarkably refined combination. Ultra-compact and slim in the pocket, yet equipped with a blade that performs far beyond its size, it delivers outstanding cutting power and edge retention in a minimalist format.

Lightweight, discreet, and highly capable, it’s the kind of tool that quietly earns its place as a daily companion — equally suited to anyone who appreciates precision and performance in a compact form.